How To Pass a Difficult Corner With a Ceiling Plinth! Few People Know The Tricks of Such Angles
ฝัง
- เผยแพร่เมื่อ 21 ก.ค. 2022
- In this video, we showed you how to properly create corner problems that are common in the work process. Find what you need from these tips and '' Create the perfect corner every time ''
Respect pt astfel de meseriași
Thank you for sharing.
Buenos consejos gracias
Perfect! 😀👍
Thanks for leaving your thoughts in the comments!
Great geometry skills. You make it look easy! But a beginner would struggle forever. Its difficult to get good and fast at something you don't do every day.
I want a spring angle of all the crown molding on all the walls to be 45-deg. The creates a gap between the ceiling and the top edge of the crown molding on the sloped sides of the room. I'm planning to put LED accent lighting that will shine up from behind through the gap between the crown molding created instead of laying it back. I think I can adapt this technique to work, but it's (at least) a starting point.
Thanks for leaving your thoughts in the comments!
I've been a Finish Carpenter for 21yrs I have a $1,000 set up just the saw alone was $850 at the time installed miles of crown,base and various types of mouldings layered or unlayered and I've never seen any guy do this. You have to be good at math to do it right among other things.
this is the worst way any1 could have done this
@@johns9543 they're not bad for a green horn at first, But after that well...
Bruh you need a new hobby.
Jp I think he's really BAD at math that's why he is doing it this way. Any rookie trim carpenter knows this is incorrect you don't need the 3rd piece. After 21 years you should know this
@randymarsh8324 3rd piece is like a bulnose or self return. It adds additional depth the the corner and would require more effort to make. It's not mitering and beveling 1 cut per crown; your doubling your cuts which requires more skill because any error made is compounded by 4 instead of 2
You don't need that 3rd piece. You can make them meet correctly one board to the other.
Hammer! Echt Klasse
Genial
Trabajo
Have a happy New Year!
THANKS 🙌🙌🙌✌✌✌🌟🌟🌟🌟🌟
SUPER , BRAVO , OK !!!
Great presentation. Thank you for the time and effort you took to make this video and share it with us. Greetings from Croatia.
Fantastic work.
Thank God YT made the “Do Not Recommend Channel” option!
I'm not expert but when I get to an odd corner or something is out of square,I use a profile gauge!
Legal conseguiu mais não precisava disso tudo e o acabamento podia fica melhor
How about just build the room right in the first place?
First step:
Change your contractor.
To You tube :
when you start showing your suggestions for other videos right BEFORE the one playing is finished ,you get on the way of viewing the end part of the video.
I hope i explained my self.
The exact same thing annoyed me so I did some research: youtube puts those suggestions and there is NOTHING you can do to get rid of them lol. You'd need to download the video and watch it on your harddrive to see whats beneath 😂
Holy Overcomplicating, Batman!😳
9/10 people being shown your renovation [within 10seconds of entering the room]...
🤔 “umm....did y’all install the crown moulding like that on purpose?”🤨
Well when your up against the wall then you need clever solution just like in this case
Absolute cowboy 😂
Pure dolphin 06
Te fuiste en raya hermano...jjj
Этот метод был продемонстрирован давно Шайтером Андреем
Нет. Не так. Да оно тупо содрано. Только гипс зелёного цвета)
why couldn't we learn stuff like this in math/shop class?
al principio no entendi, al final tan poco
1год будет делать умник
3 cuts to make that with 2 pieces of wood
👍🏻💯💡🇨🇺
Thanks for leaving your thoughts in the comments
le mieux c'est de faire du bon boulot avant avec le placo !
As someone that does this kind of work that's not how to do it
You expect me to draw with pencil on my fresh painted walls?
Мастера гипс крутили.
Just to do this cut ,so much math 😳it has to be an other way
Not following the roof line. Looks bad. Great math and execution but does not pass the consumer eye test.
Spoko sprawdza sie, ale stosując ten sposób na co dzień nie zarobił bym na bułkę😃
Я понял .что ничего не понял
Absolutely not! You only need one miter. Also the molding piece needs to be pitched out and away and not tight up against the wall for that profile unless my eyes are playing tricks on me. You can hand saw it but his jig needs to be at the correct pitch and correct angle. And if your not doing trim behind excellent framers and drywallers or its an older house where the ceiling has settled and the walls are racked out of plum than perfect 90 degree corners are rare. You’d want and adjustable jig where you could change the angle on all axis’s and the pitch ever so slightly when your cutting your crown. If your off on any axis by more than a tenth of a degree it won’t be tight. I recommend a digital angle finder with long arms and a small one too. A Miter saw with a sharp blade goes a long way.
Thanks for leaving your thoughts in the comments
Don't do this people.. learn your angles.. get a good saw
Thank you. Yes, this person in the video doesn't know his deal, but it looks terrible.
Make a video maybe then say something
Интересно, этот болван в конце понял, что за шнягу слепил, хотя, если ролик есть, значит не понял😄😄🤦♂️
Какого хрена потолок по отношению к стене не 90°?
Мансард бро
I think I would fix the wall. Why put crown molding on a screwed up wall. It's like putting lipstick on a pig.
The wall might not be messed up. This might be the ceiling in a stairwell or a loft. Not everything is built like a box.
Pardon the pun but when you cut corners things are meant to be easier.
Seems to be a lot of effort to incorrectly do the job.
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
U priming ? lol
Wow that's completely wrong you don't need the 3rd piece, just need to learn your angels
Está mal hecho
Please do not do this, this is not the correct way.
Yuck, you can twist and boom
Wft never seen that big if a crap in my life
C'est dégueulasse
Ахахахаах, вот что делает болонская система животворящая, почитай про катеты и гипотинузу😂
No entiendo ingles
Лучше заново Велосипед изобрёл бы я бы больше удивлялся бы😁
Way to much time wasted
haha, by the time he is doing this crap, I would have joined.
Yav arkadaş bukadar ne uğraşıyorsun sanki nükleer santral projesi ciziyorsun koy köşe biraz ondan biraz ondan ayarlıyana kadar kes işte
Lost me on this one.
3rd piece look ugly no professional..
Have a happy New Year!
That looks like shit
it is
Это убожество того не стоило