Thanks heaps for this video. I found a piece of broken clear plastic stuck in the drain impeller. No idea how it got in past the ball valve and the filter. It was bigger than the orifice containing the ball bearing. Makes me wonder if it's always been in there. The drain message has been an intermittent fault for a long time.
Hey can you help me with the time on the machine? I usually pick which wash cycle o want then press the time to go down to 30min and turbo button on However the machine what’s washed way over 30 min Please help
So I tried that and it still say it’s needs to drain and the the glowing red icon say drain and PC. What is the pc mean? Please help my Dishwasher still says it need to be drain but I don’t know what to do.
cant even see what you are doing. Ive taken out that piece with the ball in. There is nothing in there blocking and there is still water sat there in the base not draining away.
The F18 error code is listed as “Flow Meter Stationary”. This could be caused by: 1. Tap is turned off or flow of water is restricted. 2. Waterproof system failure. 3. Flow meter module failure. 4. Control unit failure. It will need a technician visit to identify the issue and resolve depending on the diagnosis.
It worked! Thank you so much! This was awesome! So grateful!
Very helpful! Thank you
Thanks this was super useful!
Worked for me! Thanks very much!
Thank you very helpful, our problem has been solved!
Thanks so much. Solved my issue.
Very useful thanks
Thanks heaps for this video. I found a piece of broken clear plastic stuck in the drain impeller.
No idea how it got in past the ball valve and the filter.
It was bigger than the orifice containing the ball bearing.
Makes me wonder if it's always been in there.
The drain message has been an intermittent fault for a long time.
Excellent! Thank you! M
Gert useful thanks
Sogood
Hey can you help me with the time on the machine? I usually pick which wash cycle o want then press the time to go down to 30min and turbo button on
However the machine what’s washed way over 30 min
Please help
So I tried that and it still say it’s needs to drain and the the glowing red icon say drain and PC. What is the pc mean? Please help my Dishwasher still says it need to be drain but I don’t know what to do.
Great but can’t see close enough
Please consider adding a closer view of the part you are turning to clean out. Edit to update a thank you. I figured it out and doing a test wash.
Sure we might see if we can get a close up of it. The new Miele dishwashers have now removed that part!!
cant even see what you are doing. Ive taken out that piece with the ball in. There is nothing in there blocking and there is still water sat there in the base not draining away.
Good video but bad perspective, you can barely see a thing
Thank you! Do you have guidelines for the F18 error message?
The F18 error code is listed as “Flow Meter Stationary”.
This could be caused by:
1. Tap is turned off or flow of water is restricted.
2. Waterproof system failure.
3. Flow meter module failure.
4. Control unit failure.
It will need a technician visit to identify the issue and resolve depending on the diagnosis.
Cleaned. It still doesn't drain. Now whatn
Give us a call to book in a service call on 08 82231146. There is nothing else you will be able to do.
@@andrewktoris7894 I replaced the drain pump. Works like new! 😊
If it is not in a blockage within the non-return value then it could be where the sink spighott is or inbetween.
I can not see the valve in your video?
Just see your finger ,
Egg!
Apologies :(. We will see if we can edit this.
poor pics
Useless video. Basically tells about one type of issue, that the ball Behring can be stuck. Seriously nothing else.
1:42 Do you say "All the gunk and Cr*p" ??
If so, perhaps a more technical or professional terminology was preferable.
Shut up loser