THANK YOU SO MUCH! You saved us a call to a repairman. I saved this video. A tiny piece of plastic was stuck in the non-return valve. The manual drawing wasn't clear. The arrow shows up. Should show inward. So far, the dishwasher is running smoothly. 👏 ❤😅
We are so glad to hear the video helped and that your dishwasher is running smoothly, Claudia! 😊 Thanks for sharing your experience with us! We'll definitely take note of the feedback about the arrow for future reference. If you need any further assistance, feel free to reach out!
We’re so glad to hear the video and instructions helped you out, Pauline! Our Triple Filter system does an excellent job of trapping those pesky particles!
I have just had a Miele engineer round to fix my dishwasher. The non return valve in older models like mine were made in two parts that were glued together. The glue had perished so the valve was in two halves that caused the water not to drain. The replacement part has been modified and is now made from one piece only. Working fine now and the part was not expensive.
Thank you for sharing your experience! We're glad to hear that our engineer was able to resolve the issue with your dishwasher and that the new part is working well. We strive to continually enhance our products for the best performance and longevity. If you have any further questions or need assistance, please don't hesitate to reach out.
Thank you for you video. I had the problem with the drain flushing light.. I found out it was my return valve that was causing the problem. My valve was not stuck but the ball felt a bit hard to move. I did not have any foreigh object inside the valve.There are videos on youtube that show how to replace the vavle. Instead orf replacing the valve I just put some olive oil inside, let it bath in it for few minutes and it works like new. The rubber got softer with oil and does not hold the metal ball inside,. This happends in older dishwasher. It is a easy fix to try.
After program is finished, the water is pumped properly. But after a few days, the water creeps up. I’ve replaced the non return valve, it worked only for 2 months. Now I have the same problem again, the water from the sink seems to come into the dishwasher. My Miele is 15 years old.
We genuinely regret the inconvenience caused by your Miele dishwasher. For immediate assistance and resolution, please contact our Consumer Support team directly at 888-996-4353. We look forward to speaking with you.
Hi, Dave! Great question. The check valve ball will bounce around, similar to a loose marble. If it doesn't, something may be stuck in the valve. Our customer service team would be happy to assist you further at 888-996-4353 during regular business hours. Alternatively, you may also contact them via our website here: www.mieleusa.com/f/us/contact-next-us.aspx Thank you very much.
Hi, Mary! We're so sorry to hear about the issues you are experiencing with your Miele dishwasher. Please give our Consumer Support a call at 888-99-MIELE during regular business hours for assistance. Thank you!
THANK YOU SO MUCH! You saved us a call to a repairman. I saved this video. A tiny piece of plastic was stuck in the non-return valve. The manual drawing wasn't clear. The arrow shows up. Should show inward. So far, the dishwasher is running smoothly. 👏 ❤😅
We are so glad to hear the video helped and that your dishwasher is running smoothly, Claudia! 😊 Thanks for sharing your experience with us! We'll definitely take note of the feedback about the arrow for future reference. If you need any further assistance, feel free to reach out!
Perfect instructions and clear video. The offending item was an apple stalk lodged in the trap. I’m very grateful, thank you.
We’re so glad to hear the video and instructions helped you out, Pauline! Our Triple Filter system does an excellent job of trapping those pesky particles!
Holy smokes, what a help! Just restarted my dishwasher and am hoping/praying, but this really helped me get through!
Glad it helped!
This has happened before, but I'd forgotten the procedure. Thanks for the helpful walkthrough, all fixed now.
Glad it helped, Lino.
I have just had a Miele engineer round to fix my dishwasher. The non return valve in older models like mine were made in two parts that were glued together. The glue had perished so the valve was in two halves that caused the water not to drain. The replacement part has been modified and is now made from one piece only. Working fine now and the part was not expensive.
Thank you for sharing your experience! We're glad to hear that our engineer was able to resolve the issue with your dishwasher and that the new part is working well. We strive to continually enhance our products for the best performance and longevity.
If you have any further questions or need assistance, please don't hesitate to reach out.
Great video, good pictures and straight forward good and clear instruction.
Thank you for the feedback, Morten! We're glad you found the video helpful!
Danke, das hat geholfen! Maschine läuft wieder!
Super, freut uns!
Thank you so much! This has been a huge help -- and the F14 message is gone.
You are so welcome, Donna. Glad it helped!
thank you. this fixed the F14 error code on my dishwasher.
Excellent!
Just fixed my intake/drain valve. Thanks.
Tha k you so much sir... This help me alots x
Our pleasure, Penny!
Thanks
thank you!!!!!! sounds so sweet now!!
:-)
Thank you for you video. I had the problem with the drain flushing light.. I found out it was my return valve that was causing the problem. My valve was not stuck but the ball felt a bit hard to move. I did not have any foreigh object inside the valve.There are videos on youtube that show how to replace the vavle. Instead orf replacing the valve I just put some olive oil inside, let it bath in it for few minutes and it works like new. The rubber got softer with oil and does not hold the metal ball inside,. This happends in older dishwasher. It is a easy fix to try.
We're glad you were able to fix it yourself, Vladimir!
Thank you!
After program is finished, the water is pumped properly. But after a few days, the water creeps up. I’ve replaced the non return valve, it worked only for 2 months. Now I have the same problem again, the water from the sink seems to come into the dishwasher. My Miele is 15 years old.
We genuinely regret the inconvenience caused by your Miele dishwasher. For immediate assistance and resolution, please contact our Consumer Support team directly at 888-996-4353. We look forward to speaking with you.
Thanks!
Our pleasure, Rhotz! 😊
THANK YOU SOOOOOOO MUCH
Should the check ball be that loose? Mine does not wiggle around like that.
Hi, Dave! Great question. The check valve ball will bounce around, similar to a loose marble. If it doesn't, something may be stuck in the valve. Our customer service team would be happy to assist you further at 888-996-4353 during regular business hours.
Alternatively, you may also contact them via our website here: www.mieleusa.com/f/us/contact-next-us.aspx
Thank you very much.
Thank you so much!
Mine valve wont budge
Hi, Mary! We're so sorry to hear about the issues you are experiencing with your Miele dishwasher.
Please give our Consumer Support a call at 888-99-MIELE during regular business hours for assistance. Thank you!