Nice video. But it doesnt help me at all. My M-1501 does not have the allen head screw openings and the degree dial in the back. Do you have instruction this this model that does not have those openings in the back?
I have a Ricoma S8 series machine and had a needle break. I've removed the broken needle, but when it stitches the bobbin thread breaks, but the machine carries on. I've cleaned and oiled it, but nothing I do sorts it. It was stitching fine before this happened. Any suggestions please?
Where is the video on "How to forward and rewind an embroidery job"? Had an error with the bobbin running out. There is a gap between the stitches now. I held down the stop button, but the needle didn't move, only the thread. Thank you!
Hello. If you have a Ricoma machine then make sure to contact our support team and they will be happy to help you. If not then we will look into making this video but the function might differ from machine to machine.
The communication error can occur for various reasons. We recommend submitting a ticket to our service team so they can assist you! ricoma.com/US/support
Hey there. If you have a model that should be stopping after a thread break then please follow the link and get in contact with our tech support. www.ricoma.us/tech-support
Thank you!
Of course! Thanks for watching (:
Omg. Thank you for this video!
Thank you racoma
Our pleasure, Richie!
Nice video. But it doesnt help me at all. My M-1501 does not have the allen head screw openings and the degree dial in the back. Do you have instruction this this model that does not have those openings in the back?
Hello make sure to contact support for help -> ricoma.com/US/tech-support
How about adding "Communications Timeout, Check the Connection!" Error. I see this on Ricoma Connect a lot with no help to fixing this Error
Hi! Thank you so much for your feedback, we will be sending this over to our team!
This just happened to me and I contacted Ricoma and got no reply.
I have a Ricoma S8 series machine and had a needle break. I've removed the broken needle, but when it stitches the bobbin thread breaks, but the machine carries on. I've cleaned and oiled it, but nothing I do sorts it. It was stitching fine before this happened. Any suggestions please?
Hi there, make sure to contact our support team for help with this! ricoma.com/us/tech-support
thank you 💗
Thank YOU for watching!
Where we find 2 openings in ricoma1201 S model
HI! Were you trying to fix any errors on your 1201 model?
100 not shown
Thank you for help :)
How do you correct a communication timeout error
Hi! Please submit a ticket to our service team so they can further help > ricoma.com/US/support
How to fix a cutter error
Where is the video on "How to forward and rewind an embroidery job"? Had an error with the bobbin running out. There is a gap between the stitches now. I held down the stop button, but the needle didn't move, only the thread. Thank you!
Hello. If you have a Ricoma machine then make sure to contact our support team and they will be happy to help you. If not then we will look into making this video but the function might differ from machine to machine.
Machine loud tread breaks it keeps on sewing
Hi. I have a "Color change time out". I replaced the broken. Please help
Make sure to contact support for any help! You can reach us here -> ricoma.com/US/tech-support
I'm getting the same message Did you get any help?
how about the communication error ?
The communication error can occur for various reasons. We recommend submitting a ticket to our service team so they can assist you!
ricoma.com/US/support
Machine picture on screen do not line up with the actual needle and hoop keeps on touching the hoop
Hi If you need more help with needle breaks, click here to be connected with our service department -> ricoma.com/US/tech-support
If you have a mt 1501-10'S can all display but for me it was the bobbin
Hi! Can you clarify on what you mean?
How do I fix the trimmer position error
Hello. Please reach out to our support team:
www.ricoma.us/tech-support
How do i correct the trimmer position
I'm getting a "thread break" warning on all my thread now. Did not have problem before. The thread is not broken...now what?
This is called a false thread break. Your thread break sensor is either misaligned, dusty, or broken.
Still facing no needle error
Hi! We recommend contacting our support team about this, so they can further help.
ricoma.com/US/contact-us
I have problem in my ricoma it seems to be power issue.. Machine turns off on its own for like 10 seconds and then restart.. Very annoying
Make sure your machine is connected to a surge protector because it seems to be a power supply issue!
My machine has a grinding noise with axes shifting from 100°.
Hello we suggest getting in contact with our support team
www.ricoma.us/tech-support
tha&nks
Thank you for watching!
I have a RCM1501PT
What is:
ERROR 150
NO DEVICE
Hi there, please send a service request through our online ticketing system and someone will be happy to help! > ricoma.com/US/support
Cost
For more information, please contact us here > www.ricoma.us/contactus
Ale on mi píše není přiřazená jehla nemohu spustit vyšívací program
Ahoj! Můžete upřesnit, co máte na mysli?
My machine writes emergency stop even after I rotate the nob
HI Lucky, please reach out to our customer support team by emailing us at Service@Ricoma.com. Someone will be happy to help!
+y limit error my machine show this
My machine never stops when I have a thread break.
Hey there. If you have a model that should be stopping after a thread break then please follow the link and get in contact with our tech support.
www.ricoma.us/tech-support
👋