How To: Whirlpool/KitchenAid/Maytag Washer Complete Agitator Assembly 285565
ฝัง
- เผยแพร่เมื่อ 1 พ.ค. 2017
- How To Replace: Whirlpool/KitchenAid/Maytag Complete Agitator Assembly 285565 www.appliancepartspros.com/whi...
For a full article, please visit: www.appliancepartspros.com/b/...
Symptoms: damaged; you'd rather change complete kit instead of individual pieces.
Tools: small flathead screwdriver, 7/16" socket with ratchet and extension, liquid detergent.
This Whirlpool/KitchenAid/Maytag made Washer Complete Agitator Assembly replaces the following older part numbers on Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Sears and Kenmore Washers: 3348117, 3352106, 470786.
Buy the new Washer Complete Agitator Assembly 285565 here: www.appliancepartspros.com/whi...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepartspros.com/. We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
Twitter: / applpartspros - แนวปฏิบัติและการใช้ชีวิต
![[ไฮไลต์] มวยสากลฯหญิง รุ่น 66kg จันทร์แจ่ม สุวรรณเพ็ง ไทย vs แอลจีเรีย รอบรองชนะเลิศ | โอลิมปิก 2024](http://i.ytimg.com/vi/nt71uhZjn6Y/mqdefault.jpg)
This was so helpful. I was struggling finding a way to remove the cap and then the next piece to access the bolt. Thank you!
Great video
Clear,direct and informational. So many repair videos are ego driven. I'm glad to say that I did not detect that here.
Thank you
Thank you!!! I couldn't figure out why I couldn't put it together. I put the bolt in too early. Works like a charm now!!!
You're welcome!
I can’t be thankful enough! Thank you so much for this video!
Our washer's agitator bolt came loose. All I needed to know was how to remove the plastic cap to permit access to the bolt. Whirlpool customer support / tech support said I needed to have a technician visit ($89 just to show up at my door!). Not happening...just to re-install a bolt??? Called a local appliance repair shop to ask for help and they acted like I'd asked them to for the keys to the palace treasure vault.
Found this video. Oh! You just pull it out? Mine was a little stuck, but the engineers at Whirlpool supplied me with three little "windows" in the side of the agitator where an appropriate sized screw driver leveraged the cap out sufficiently to remove it with my hand. Tightened down the bolt. Re-installed the cap. Life is good. Took my wife out to a nice lunch and still had $50 left over if I'd have called a technician. Thank you, AppliancePartsPros!
Me too except I don’t have it out yet. All to loosen to get a pair of overalls unstuck. Love these videos. If only repair companies would have a customer for life as well as all their referrals. What a shame.
I had a pillow cover stuck under the assembly. Thanks for helping me get it out.
I like how you good at fixing all the equipment and any other stuff needs to be Fixed
Thank you thank you. My problem was scuzzy dirt collecting under the agitator that was getting on bedsheets. Parts of the sheets were getting drawn under the agitator and if I didn't catch it on the way to the dryer, the brown dirt was set in and it looked like s**t. Literally. Upon removing the agitator I expected a tub full of low tide in the salt marsh type of scenery, but was surprised by a nice clean white tub. The only dirty spot was a ring of slimy scuzzy crud about 6 inches up inside the agitator. Some spray cleaner and paper towels, all done. Thanks again. BTW, a small battery driven impact hammer works wonders getting the bolt loose. Start tightening the bolt with the ratchet then finish the job with the impact wrench. Easy peasy.
thanks.... you have the easiest instructions!
Thanks for the video showing the fixing.
Thanks to you for your informative solution,thank you very much.
Thank you SO much!
This guy is the handiest man on you tube.
Great video, however I am having trouble getting the lower agitator to align back on to the spindle. Any advice?
Thank You sooo much, for wanting to Help out others sometimes. 🙏🙂
My top part broke. Is an old Kenmore with only a flat cover on top. I called Sears ~ terrible experience !!!!!!!
They 1st sent me the Top ONLY, without any parts !!!
$99 !!!
I called back and told them, she said (these were All foreign people) oh don't worry I Know what you need, tells me $106 !!!!!! I said for just little parts ?!?! Yes Ma'am,they are always so polite, bc half the time they don't know what you're talking about. Wow !!! No available parts places nearby anymore.
Sooo, though I really didn't think that was Right, desperate, I paid. About a week later, big box, and very Small box came. She didn't just charge me, send Lil parts, she sent the bottom half of the agitator !!!!!!! Boy. Who knows what to do anymore. So cost me $200. Daughter said she probably could've found other washer on Marketplace.
Anyway, I'm 70, had no idea what to do with this all.
Told her that on phone she said no worries will send a how to video. Of course, she didn't.
I decided to just keep it all and Hope something else doesn't break down in my Old washer, that's a lot of money for me on my own.
Do you think it makes sense to keep that all, when all I really needed was the little parts ??? Sure would've been a whole lot cheaper !!!!!!!
Anyway, in checking online for a how to, yours came up, and now I think I can do it🙂👍...Thank You much.
It is easy. Just paid attention as to how the three plastic parts came out. Realized that this video was EXACTLY what I had in my machine. The only parts needed to get the upper agitator to agitate with the lower was the 4 agitator dogs. Bought them from Maytag for $6 plus $5 shipping which took 3 days. Should have bought them from Amazon for $3.20 and free shipping over night.
Took the upper agitator off and removed the parts. . .two, actually three pieces of plastic. one of them held the old broken dog parts. Worried two parts apart and cleaned out the broken dogs. . .then decided to wash the inside of the upper agitator to get all the gummy semi-dried fabric softener (Poor way to distribute the fabric softener) in the kitchen dishwasher. Came out looking nearly new. Watched the video again and took actually less than ten minutes to reassemble the parts and bolt it in. Then washed a load of clothes for the first time in a week. (I had taken it apart last week to make sure I could identify the parts, which I ended up not needing to buy. Only problem was the worn out dogs.
@@brucefrank6119 I'm responding to you Bruce because your comment is only 2 months old. Did you have any problems getting the top cylinder to "snap" together with the bottom part? Those two little clips in my base look fragile and I don't want to push too hard on the agitator dog assembly to break them. I tried and one of the clips bent, but the plastic seems flexible and I bent it back into place.. Thanks for any input.
I took entire agitator out to replace dogs. Then when I put agitator back it stops while about 1" from bottom of tub. When I screw in bolt it stops at one point with out going into threads on washer shaft. There's nothing in the gears of agitator or threads on washer shaft. What happened?
ok after the aggitator is off what or where do i go to get that special Tool to take the Drum completelly off ????? im working it now can you hammer with a screwdriver i have a wrilpool W10240509d -W10240510D .
Can you add an agitator for the newer models without one? These new models without agitators will not clean clothes and leave detergent residue.
Great video. Thanks a bunch 👍🏻.
You're welcome!
If the agitator is wobbly on the top part is that a sign that its worn out and isnt it a good idea to change out the hub Too?
I can’t get mine to lock in place! Any suggestions?
I HAVE A QUESTION: i HAVE A MAGIC CHEF MODEL: CAV2004AWW BUT I CAN'T FIND A VIDEO THAT SHOWS ME HOW TO REPLACE THE AGITATOR. OR TO SHOW ME HOW TO REACH THE MOTOR OR MOTOR CLUTCH. THANKS I WILL APPRECIATE YOU FOR YOUR HELP NINO CROES
Is it necessary to have the agitator cap?
I’m looking to replace the agitator on my washer with one that is less harsh on my clothes. The agitator is hard on my clothes
NO MATTER WHAT I do after removing the 7/16 bolt can I lift off the agitator assembly from the center spindle. It lifts up about an inch, and hits a hard stop and won't budge beyond that. (Electrolux/Frigidaire GLWS1749AS5)
I have same problem
How to remove rop from agitato no bolt in center
Ok question.. mine spins with no problem but won't agitate.. the top part works fine. Teeth are all good and everything... HELP!
If you hold the lower agitator and the screw still spins, what should I do? When it first wasn't working it would freely spin and the bolt was loose. I tightened the bolt and it worked great. Now it won't agitate but the dogs are still engaging so i tried to tighten or loosen the bolt and it just spins even if I hold the lower agitator. Hmmmmm?????
Could be a couple issues. Have you figured this out yet?
Who does your hair? Luv it!❤
I’ve already replaced the whole agitator dog kit in my Maytag centennial washer but the bottom agitator base will not spin correctly while agitation mode is on
a button became stuck between the agitator bottom and the tub. The agitator spins freely. Will it cause any damage to the machine or should I remove the agitator and remove the shirt button?
It shouldn't be too hard to remove the agitator to get the button, just to be safe.
How do you repair or remove the agitator when it is one of them little short ones that is down in the washing machine it is not a tall one like you showing the video can you please show me how to do this as I think that is what's wrong with mine
What is the model number of your washer?
How do you remove a stuck lower agitator?
Im having the same problem. Its full of rust.
I can't get the agitator assembly to go all the way down on the shaft. Please help.
Same
Sir mera pas whirlpool white magic pro washing h washer dont working motor one side playing
We'd be happy to help you out with that! We offer free technical advice and diagnosis. You can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We will need your model number to give you accurate advice, which you can locate using this tool on our website: www.appliancepartspros.com/modelnumber_locator.aspx
I replace the agitator but still not washing properly
I want to find the lid switch
What is your model number?
Hi replace the whirlpool washing machine but still not washing properly
heres my prob ,the whole agitator comes right out ,the spline shaft comes out of the washer , is the shaft supposed to come out with the WHOLE agitator assembly ??? THIS WASHER IS A MAYTAG PERFORMA SERIES ,THANK YOU KINDLY !!!
We'd be happy to help you out with that! We offer free technical advice and diagnosis. You can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We will need your model number to give you accurate advice, which you can locate using this tool on our website: www.appliancepartspros.com/modelnumber_locator.aspx
And with the bolt is stripped how do you take it off
Try an extraction socket?
Just because it is a cap you don't need a screwdriver for it you just lift it up
1:04 or you are going to have the agitator cap where we will need to PULL IT OFF... NOT USE THE SCREWDRIVER...
U stand like a wrestler👍
oh its called a Spanner Wrench
line up locking clips?? how?? cant see anything
If you start at the 3:08 part in the video you can see the two little locking tabs that he is referring to that are located on the lower agitator. Those would be the tabs that you are trying to line up with the locking clips on the agitator dog assembly.
@@appliancepartspros I am doing this right now and afraid to push too hard on the agitator assembly to lock the two pieces together. I did push... heard a click,... but the cylinders are not locked together, and now one of the tabs in the bottom part is bent... the plastic tab seems quite flexible, and i used plyers to straighten it. Is there anyway to fix the problem without buying a whole new bottom part with tabs that will lock? Thank you for any assistance.
Nice, same as the web site that can't proofread their own directions and lame explanations before they put hem on the site making it seem like you are working with a dryer in your instructions rather than a washer.
No short to the point reason for anything going wrong here either. like wtf causes this problem. what a load of crap!!!~! I dont see why some normal , not too far out of the way Human help would be too much to ask.
PROS?" Hardly./ What happens when this part breaks:
If you are in need of an agitator repair kit, your dryer may be experiencing a noisy agitator, or an agitator that spins freely in both directions. If your agitator is no longer agitating properly, your clothes will not tumble, and will not be washed properly.
Where are the dryer agitator parts located? are they cheaper than the washer agitator parts?
Replace my no agitator to a agitator Whirlpool washing machine
1a
Will not work with a Roper!!!!! The Roper is attached to the tub and when you try to turn the screw, the whole tub moves! But it works well with every other brand. SIGH 😔!!!!
If you would like to provide your model number we can check and see if we can find anything that might be able to help you.
@@appliancepartspros Roper model RTW4640YQ1. I found Ropers are cheaply made and when I added springs and new balance rods a few years ago, when I disconnected them, the whole motor hit the floor while on a name brand, they stayed balanced in air. I bought the agitator dogs and ratchet extension and got started, I removed the top and there was nothing even covering the screw. I would need someone to hold both sides of the tub to hold it still and another person to unscrew the agitator with the ratchet. Unfortunately, I live alone and have nobody to help me within 100 miles. I am also disabled which is why I try to do costly repairs bc I can’t afford a new washer. Thanks for your reply and I hope you can think of something that can help.