Thanks for supporting the channel and taking the time to comment! Be sure to check out the Down & Dirty series. That is my training series that walks you through a lot of different machines.
Could you give a tour on the motor side?. Like where to install the hydraulic Where to check the hydraulic, where and what are the filters for. How to remove and clean air filter, etc I have a 2004 tr270
Let me see what I can do. I'll have to swing into the dealership to get my hands on one of these units. You might dig into your owners manual as well. There will be a lot of good information in there you'll need to know like oil weights, service intervals etc.
You'll need to have the hydraulics locked out (you can't switch the pattern while the hydraulics are live). There is a button below that says "iso" and "H" on it. Hold the iso side down until the machine beeps. Reactivate your hydraulics and you'll be in the ISO pattern.
@@carlsnieders7237 since it will probably be a while before I can get the video out I will just let you know. The auxiliary override allows the auxiliary hydraulics to remain on even though the lap bar is up and the door is open. The only time you would ever need to use this is if you had an attachment such as a log splitter that you would operate from outside the cab
@@DieselandIron thanks, I am trying to find out how to keep the aux hydraulics locked on, I have a slasher and rotary hoe attachment and it’s painfull in my thumb to keep button forward or back for hours on end.
Top-flight content! I watched the first one. I will definitely watch the rest.
Thanks for supporting the channel and taking the time to comment! Be sure to check out the Down & Dirty series. That is my training series that walks you through a lot of different machines.
In the 2009 420CT, would you have deluxe control panel with keypad starting, and an actual key?
I couldn't tell you
Could you give a tour on the motor side?. Like where to install the hydraulic Where to check the hydraulic, where and what are the filters for. How to remove and clean air filter, etc I have a 2004 tr270
Let me see what I can do. I'll have to swing into the dealership to get my hands on one of these units. You might dig into your owners manual as well. There will be a lot of good information in there you'll need to know like oil weights, service intervals etc.
Does anyone out there know how to setup the keypad lock on the case b series skid steers ? I haven’t been able to figure mine out.
I haven't tried it in the b series but I would think with the new menu system it would be somewhat straightforward
@@DieselandIron you would think so , it’s easy to navigate through the menu and the passcode is four digits and whatever you enter it says invalid.
Can you demonstrate the ride control in action?
Let me see if I can throw a video together at some point here when the weather breaks.
How do you change to ISO controls??
You'll need to have the hydraulics locked out (you can't switch the pattern while the hydraulics are live). There is a button below that says "iso" and "H" on it. Hold the iso side down until the machine beeps. Reactivate your hydraulics and you'll be in the ISO pattern.
You missed explaining the aux continuious flow button on the left of the unlock button
That's almost a video of it's own discussing aux hydraulic options
Please do a demo of the aux overide, i have no idea, and dont have an operating manual
@@carlsnieders7237 since it will probably be a while before I can get the video out I will just let you know. The auxiliary override allows the auxiliary hydraulics to remain on even though the lap bar is up and the door is open. The only time you would ever need to use this is if you had an attachment such as a log splitter that you would operate from outside the cab
@@DieselandIron thanks, I am trying to find out how to keep the aux hydraulics locked on, I have a slasher and rotary hoe attachment and it’s painfull in my thumb to keep button forward or back for hours on end.
@@carlsnieders7237 if you are using an alpha series machine the rocker switch should have a detent to lock the auxiliaries on.
I was stuck in park for 20 minutes lol
Haha it happens!