The Best Way To Lay Your Transfers STRAIGHT

In this video I walk you thru step by step on how i lay my t shirts down straight on my heat press and how i lay my transfers down straight. This trick will work every single time. You will never press a crooked design ever again if you follow these steps.
Support the channel and learn more about starting a clothing brand from home. Early access to videos, Rewatch Live Streams and Content made just for Patreon! Check out / bigbrandoh
Check out my E Books and ALL Big Brandoh Shirts and Hats at BigBrandoh.com
Follow me on Instagram @BigBrandohTV
Use my affiliate links below if you are looking to buy supplies or equipment. No extra cost to you and it helps out the channel.
Ricoma Embroidery Machines
ricoma.com/US/referral/BigBra...
The Heat Press that I use
SigSeries.BigBrandoh.com
Ricoma Heat Press
shop.ricoma.com/?referral=Big...
Stahls Heat Press
shrsl.com/3i0k1
The Hat Heat Press that I use
shrsl.com/2gw8d
Heat Presses for all budgets
shrsl.com/2f0wd
Cameo Vinyl Cutter
shrsl.com/29zpz
EconoTransfer HTV
Econo.BigBrandoh.com
BFlex HTV
BFlex.BigBrandoh.com
ThermoFlex HTV
ThermoFlex.BigBrandoh.com
Siser Easyweed HTV
shrsl.com/1z0qf
Supacolor Transfers
Supacolor.BigBrandoh.com
Transfer Express Transfers
TE.BigBrandoh.com
Shipping Supplies and Heat Press Supplies
Poly Mailers, Scales, Laser Thermometers, Safety Rulers, T Shirt Folders, Clear Poly Bags, Cutting Mats etc.
www.amazon.com/shop/bigbrandoh
Sawgrass SG500 - Sublimation Printer
Sawgrass.bigbrandoh.com
Heat Press Base Cover
shrsl.com/1ud1q
Blank T Shirts
Blanks.BigBrandoh.com
T Shirt Mock Ups and Design Templates
sockitos.com/collections/down...
Custom Fonts
creativemarket.com/fonts?u=Bi...
If You Need a Graphic Designer. Look up these guys on Instagram:
@aka_jerry_m @Dizmajiz @Rawtoons @BrentTab

[@theprintgoddess]

You did an excellent job teaching this. You could actually be a school teacher.

[@Untitledxproject]

The old school technique is still tried and true. Thanks Kuya Brandoh ✊🏽

[@srt-papi8799]

Man, this was incredibly helpful. Thank you.

[@aladyandaboss]

Any tips on why my design is not sticking ?

[@jessicamarie8806]

BEEN AT THIS FOR OVER 2 YEARS AND THIS IS ONE OF MY BIGGEST HEADACHES!! VERY GOOD TIP. THANK YOU!

[@philipsullivan9284]

Excited to watch this one! Love the videos bro!

[@ashleystewart1929]

Best video on youtube. I been struggling with this to the point I'm spending like an hour trying to center the shirt and the design only to end up with a crooked design anyway. This is super helpful! Thank you so much

[@raymondmazza2338]

Your the best at giving the real deal info that we need to know ! All good will come back to you 10 fold Can’t thank you enough

[@sherylrivera4035]

Very helpful tips as always! Thank you

[@inaedemarughu8275]

I really need a slide out heat press. Thanks for putting this video out though bro. I got these rulers in here and like you said, they’re not really much help at all.

[@corykayser8570]

This is such simple and easy advice without a bunch of gadgets.

[@blainelaprairie8216]

Thank you so much for this video! 3 crooked transfers and I was getting so frustrated. This is a huge help thank you!

[@ZsoCreative1NJ]

Always informative👍🏽🙏🏾

[@artfulbarb5775]

Thank you for your great instructions. T shirt transfers are new to me and this video really help in creating a workflow. Using a line to follow worked great and all I have is one of those hand press machine! Thanks again!

[@lincoln3x7]

Really solid "how-to" video.... no wasted time or BS, just here it is. I use the same basic method for my shirt alignment (bigger shirts are more difficult to guess from the overhang for me), for my transfers... I do keep a ruler handy to check spacing from the sides (i'm going to try the pinch method, that looks like a time saver) Thanks!

[@uhhmya]

thank you for this, had a heat press at home that no one used. So decided to put it to use! This vid helped tons!

[@yourteesyourway]

Good info, knowledge is power, thanks for sharing with us

[@cherylwilson3701]

That is my flaw with my t-shirts - ALWAYS CROOKED!! Ugh!! 🤦🏾‍♀️ I am definitely trying this today! You had given me the tape trick before but this added info I am hoping is going to help as well. Thanks again for sharing. 😁

[@laurawilliams5667]

Thanks for the great tip. Instantly removed my placement anxiety!

[@henryrathjen9734]

Really like your videos. Straight to the point and easy to follow. Thank you. Newbie here

[@kellyclinton6451]

Thanks for all your help!!!

[@TimothyAllenMadison]

Another solid video. Also, got to say that you have one of the best logos I've ever seen.

[@MrHluv]

I'm just starting my business bro and I really appreciate the knowledge you just dropped on me 💯

[@Kryptokills]

This is a very good walk through of the process. Really appreciate it.

[@christaylor7436]

Brandoh...mucho thanks for these info vids. Really helps the little guys!!

[@rubygiirll]

Best video on this. Thank you so much!

[@LosAngelesMercantile]

Thank you so much for the detailed technique

[@moraleswarnold]

Knowledge taken and respected. Thank you.

[@kellejones930]

Thank you! This was so helpful!

[@ettenaejodeveca6707]

You're the best teacher. Thank you so much. Love & Respect to you.

[@BigBrandoh]

thank you for watchin and for the continued support. im glad these vids can help you out

[@Teampolyclothing]

Man, good-looking out....appreciate all your time!!

[@AC-wo7nk]

I like the idea of marking your center. I’ve always just folded my shirts and pressed to find my center but it does take way more time. I’m going to try this method. I was looking at lasers but I can’t figure out how to use those lol. Thank you

[@Justice1o1]

This is so helpful. Thank you

[@panozzftw4034]

wow thank you very much for the video friend, i messed up some tees for a client yesterday and thats what got me into your video. I hope i wont be getting these problems in the future with these steps

[@itsjustavibeapparel]

love your videos. i know everytime i'm questioning something, i can just go to your channel and find the answer i need. very thorough and straight up. !

[@jaylenerussell6133]

Is the 4 finger method used on all sizes?

[@carliebankston5071]

This was so helpful since this is my biggest struggle and is what takes me too much time! 🤪 thanks a bunch!

[@srdani33]

Hey thanks! Love your content. No BS just great info.

[@BigBrandoh]

thanks for watchin 💪🏾💪🏾💪🏾

[@1grandioso113]

So helpful! Thank you!

[@peoplemakingprogress1196]

Dope video!🫡

[@lynnewade2869]

Love your video! Just happen to come across it. Great info…..going to use your info! 😊

[@lexxusgee8922]

LIKE ALWAYS, GREAT INFORMATIVE VIDEO! WILL ALWAYS APPRECIATE WHAT YOU DO, MUCH RESPECT FOR YOU ALWAYS!! 🤜🏾

[@BigBrandoh]

yooooooooo i appreciate that!! 💯👊🏾💯👊🏾

[@cindykennedy1940]

Great job!!!

[@patrickrobinson6154]

Good job bro..👍🏾 excellent advice 👏🏾👏🏾👏🏾

[@JCGLASSHOUSE75]

Thank you for all the info brother

[@TheTheGreychild]

Thank you. I am a beginner and got all the fancy rulers none of which work... I thought it was me being bad at it but this really helps❤😊

[@StevenVincentSings]

Love your videos thank you so much

[@blaccazzvicc]

Dude.. great illustration, I’m new to this and you made it so simple and clear💯👍🏿 thanks so much

[@BigBrandoh]

thanks for watchin 💪🏾💪🏾💪🏾

[@thecomiccircuit]

Thats great information...ive used the tape on the press way from another video i believe....but still the information is a great value to anyone....thank you again for sharing...

[@BigBrandoh]

🔥💪🏾🔥💪🏾 thanks for watchin and thanks for the continued support

[@BigTimeHoops.]

Great stuff!

[@covetedstyle1728]

I didn’t know if you had seen my comment on IG. Apparently you did! Haha Thanks for your insight and information as always.

[@Bdj_jdk]

Brandoh always dropping good info

[@BigBrandoh]

🚶🏾💎💎💎💎 just doin my part tryna help anybody else on the come up

[@SM-cw9jk]

Thank you so much for this. I can do everything right but placement ends up screwing me. You're the best!

[@ednasessence]

Thanks for the tips.

[@BigBrandoh]

thanks for watchin

[@garyjames3842]

Thanks Brandoh Love your Work Gary Hobart Tasmania Cheers

[@edped79]

Thanks Brandoh 🤙

[@tonytone466]

Salute big G; thank you for your time

[@BigBrandoh]

💯👊🏾💯👊🏾 thanks for watchin

[@jeanniemendoza5481]

thank you so much for the video it's very helpful these are errors that is important to correct thank you I appreciate it so much

[@BigBrandoh]

thank you so much for watchin. i really appreciate it and im glad the info shared is coming across clear. 💯

[@bosspuzzle98]

U are good teacher 👍🏻

[@jailove71jailove]

Great video! Thank you.

[@BigBrandoh]

thanks for watchin

[@blramirez71]

Thank you!

[@true_knowledge_clothing]

Thanks bro, needed that help. 👍🏾

[@BigBrandoh]

thanks for watchin. let me know how it goes

[@davidbolam7962]

Great Video

[@raybossworld4541]

Gems 💎 bro, wealth of information

[@BigBrandoh]

i appreciate that! thanks for watchin 💯👊🏾💯👊🏾

[@kathy_b]

Thank you!!!

[@asoniafchisholm]

Free game. Thank you

[@MarinaGarcia-bp5rp]

Thank you so much!!

[@Matt24.]

Thankx

[@StreetDreamsCanada]

Good stuff bro 🖖🏾

[@ragenastyboy8788]

Thanks for that game

[@FrankenPrime]

Bro Great Video, thank you. Peace 🖐🏻

[@kimberlyarmstrong2929]

I sure wish I saw this before I bought those worthless rulers. This helps a lot. Thank you!

[@robbie1266]

Fire bro. Goat!

[@BigBrandoh]

appreciate that! 💪🏾💪🏾💪🏾 thanks for the continued support

[@laeniz]

Top Man B! Exsale with common sense!!! Dope

[@makakilokid4793]

Another great video my brotha 🤙🏾

[@BigBrandoh]

yessssah!!! thanks for the continued support! 🤙🏾🤙🏾🤙🏾

[@GeoffreyUrch]

Thanks, Pre Press the Shirt to get the moisture out Is a good Idea

[@josemiguelmartinezmaldonad7171]

Bros a genius

[@calw8085]

My Auto Heat press has a triangle heat stamped as a warning plat is hot symbol, but that triangle is the center of the press, so they probably thought of this when manufacturing the press. Kinda awesome. I went to mark the center line with a marker only to notice the triangle in the same spot.

[@user-nb8tt1ee4v]

Thank you

[@AyeItsMikeT]

Bout to get my tape on! Fire tip once again!

[@BigBrandoh]

yeeeeeee tape, sticker, marker, white out... whatever you got laying around hahahaa. whatever it takes to speed up the process and get them orders out bruh

[@diywithkenny8399]

Back to basics 😎

[@danielpapp4080]

Thanks brother, going to lay first DTF

[@nahnisjourney1406]

Thanks for doing this video tip. I’ve been trying to get away from folding my garments to find the center. My 15” x 15” heat press doesn’t have a slide out platten.
I’ll give this a try again. Pockets tend to give me problems with lining the design up. I’m going to mark the back of my press. I had even considered using a laser beam to line up the garments. 10:41

[@randy1896]

I agree with everything here. But one thing for sure , it’s eyeballing it,& by hand placement that could be the best way, with clothing it’s amazing how it’s not s sewn together square & it still looks good lol
Ty

[@psybertron]

thank you

[@YungCali]

I swear….three years in and I’m STILL double checking for my crooked work. 🤦🏾‍♂️ THANK YOUUUUUU x 💯,000,000‼️
*Edit: I’ve DEFINITELY been goin’ off the tag for the center. 🤦🏾‍♂️ these are 🔥 tips. 🙌🏽 🏆 #BigBrandoh4President 🇺🇸

[@tsamp14]

Big Brandon, thank you for the tips and your channel is niii-ce!
How do you get transfers that are cut individually to line up straight horizontally across the t-shirt?
Wife uses Cricut sometimes to do vinyl heat transfers but they are layered and have to be cut and pressed one at a time.
It’s a struggle sometimes getting a layer to line up horizontally and not look crooked getting up or down. Do you have sire fire technique like the one in this video?

[@creekfreakmasterbaits]

I can't wait to try this. I keep messing up shirts even when using the fancy rulers.

[@marcusbburleson]

Thanks

[@Coral256]

Thank you for this. I always have problems with this. Starting to believe that my body is lopsided 😄😄😄

[@blackdiamonzclothing4544]

Appreciate that!

[@BigBrandoh]

thanks for watchin 💪🏾

[@ettenaejodeveca6707]

I forgot to ask you, in creating/designing for tee shirts how are you doing this? I tried Canva because it's free but I have to improve in this area. I'm actually printing my own art on tee shirts. That's the niche that I'm building. I haven't sold one shirt yet but that's okay since I haven't perfected my process. Your lessons are very valuable to me and I appreciate you greatly. I'm happy to send you a shirt once I'm better.

[@BigBrandoh]

i use photoshop and illustrator

[@journeymantrucking4654]

My man thanks!

[@BigBrandoh]

💯👊🏾💯👊🏾 thanks for watchin

[@conniemann4944]

This is SO great!! Any tips how to make the design level? Mine ends up tilted sometimes. Also, I lined up a collar perfectly but there was way more tshirt on one side of the press than the other. I think the collar was on crooked lol What then? Thanks again!!

[@chriskingking2061]

Boss Bro!

[@BigBrandoh]

i appreciate that! thanks for watchin

[@DialToneTP]

This is by far the biggest struggle I have printing my Tshirts. I'm going to try it.
Quick Question
My heat press Has these foam square pads that came with it. Do I need to keep them on my heat press when I'm pressing a tshirt?

[@sluggzsemperbk]

Great f’n instructions

[@BigBrandoh]

yooo thanks for watchin. glad this info comes across clear and direct. 💯👊🏾💯👊🏾

[@katrinaransom2143]

Can you suggest the best dtf printer to purchase ?

[@asa_6717]

Great info! I really needed this. Will this technique work the same with a hoodie?

[@BigBrandoh]

yes! i do the same thing with hoodies and crewnecks

[@t.mcgilberry193]

clutch!

[@Houseofworshipmi]

Boss 😮

[@brandonsloan155]

My problem is the rotation of the design itself. It’s always slightly crooked. Aligned perfect on the shirt, but rotated crooked.