I am in the middle of my first 30 piece thshirt and 5 hat job and I have to press a front chest and a back print. I was dying to k ow this Information Bro. Thank you because I knew you touched on it but I finally found it. Thanks to you and @Tshirtbuddy. Thanks for the knowledge O.G.
Always putting others on! dope video as always. my question would be when it comes to over size t-shirts those measurement for the artwork don't look the best on big homies. what size print or logo/image would you put on a let say a 2XL or 3XL T-shirt/hoodie?
i dont change design size based on shirt size. i use the same size print on Small or 3XL. a screen printer doesnt burn extra screens based on shirt sizes.
Appreciate the gems.. I wanted to ask how many fingers down from the back of the neck for back hits .. but your right gotta off visuals .. all designs are different I didn't want my design to high or to low 👍 thank
that all depends how high or how low you want the design to lay. i usually place my designs right below the front collar on the back. you'll be able to see and feel where the front of the collar sits on the back of the shirt.
same rules apply for t shirts, hoodies, crew necks. if you hit the youtube search bar with "big brandoh design size" all the vids about design size will pop up.
Hey Bro just wanted to get your suggestion on brand of shirt to use for street wear heat press tshirts? I dont want to get anything that after 2 cycles the neck sags lol. ProClub Heavy seem to be good but very expensive.
Evening from NC! Customer want a full design on a t-shirt with a pocket 😮 AND he wants his name on the pocket. The design to me looks off-center and weird. Any advice on placement? Design sizing? Using htv and subli pic.
Hi bro, thanks for the video. I have a question. Will each design eg. 11inch wide be used on all sizes of shirts - from small all the way to 3xl? Or do you change the logo sizes based on the t-shirt size?
you can make it whatever size you want. you dont need anybody to tell what size it should be. measure your sleeve and create your design to fit those dimensions. thats all it is
This one was perfect timing for me, appreciate it Brandoh. Been wondering Is there a finger length from collar you like to use when putting designs on the back? Also have you been using supagang for most your orders now or do you still use the other sizes too?
Hi Brando! Thank you for all of this amazing info!! I really like the size of the back print on the west side tshirt! What dimensions do you use for that?
One thing I used to do for my chest pieces was print my designs out on printer paper.. since they were smaller designs I wanted to make sure the text was legible, the design looked good, and I could lay it on the shirt for a visual.. doesn’t work for Art larger than 8.5 x 11
Hello! Always I watching you video, you have really nice design’s. You do digitise? Or you can recommend some good digitiser companies? I start to do embroidery and i need someone good for digitise. Thank you! Gabriel
Always a great video Brandoh. Do you make different size of the same design? Reason being, a 12 inch back design would look to big on a small shirt or would you only use the 12 inch design on all size shirts?
I gotta question brandoh. Just starting and I wanna do like my first like big sale of my shirts. How many shirts should I order and what sizes should I concentrate more to get?
Always appreciate the knowledge! Question, do you get any problems pressing front and back pieces on hoodies? I feel the front pocket to be a little bit of an issue for me.
Brandoh , love your channel been trying to get the complaint dot with the LA cap with grizzly on the side or go grizz please let me know! tying to support those that have helped me in this industry and your #1 i have been hooked since 2019 im just now in position to give back to one of the goats I look up to please hit me up Appreciate all the knowledge !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I'm with you brother! No set design size! I always tell people; "Don't limit yourself!" Great video!
😭😭 I swear on Jesus slippers I was just trying to figure this out then BOOM your video pop up ....appreciate you Frfr
I’m taking that😂😂😂
I am in the middle of my first 30 piece thshirt and 5 hat job and I have to press a front chest and a back print. I was dying to k ow this Information Bro. Thank you because I knew you touched on it but I finally found it. Thanks to you and @Tshirtbuddy. Thanks for the knowledge O.G.
"Do let somebody else tell you what your creative limitations are."
Thank you for the good information.
Super cool video as usual. Thanks and God bless your business.
Love this video thanks BIG BRANDO 🔥🔥🔥💥💥💥
Always putting others on! dope video as always. my question would be when it comes to over size t-shirts those measurement for the artwork don't look the best on big homies. what size print or logo/image would you put on a let say a 2XL or 3XL T-shirt/hoodie?
i dont change design size based on shirt size. i use the same size print on Small or 3XL. a screen printer doesnt burn extra screens based on shirt sizes.
Appreciate the gems.. I wanted to ask how many fingers down from the back of the neck for back hits .. but your right gotta off visuals .. all designs are different I didn't want my design to high or to low 👍 thank
How far down from the back collar do you place your image ?
Again thank you big Brando for blessing us with your logical wisdom. Much thanks
How far down from collar for back press?
that all depends how high or how low you want the design to lay. i usually place my designs right below the front collar on the back. you'll be able to see and feel where the front of the collar sits on the back of the shirt.
The intro is legendary!
Thank you for sharing
Yas king! Thank you! This is exactly what I was looking for. Very helpful!
bro i needed this so bad to kill the doubts, thanks
Truly grateful for the info
do you have a video for hoodies as far as sizes that should go . im having a hard time trying to size for hoodies
same rules apply for t shirts, hoodies, crew necks. if you hit the youtube search bar with "big brandoh design size" all the vids about design size will pop up.
Awesome video Brandoh! The way you explained it makes a lot of sense. There’s no one size fit all…
Hey Bro just wanted to get your suggestion on brand of shirt to use for street wear heat press tshirts? I dont want to get anything that after 2 cycles the neck sags lol. ProClub Heavy seem to be good but very expensive.
Very helpful and your designs are 🔥
thank you. i really appreciate that!!! 💯💪🏾💯💪🏾
This was sooo good. Can you tell me what you would suggest if I’m putting a person’s name in a left chest logo area?
Evening from NC! Customer want a full design on a t-shirt with a pocket 😮 AND he wants his name on the pocket. The design to me looks off-center and weird. Any advice on placement? Design sizing? Using htv and subli pic.
Thank you for the video. Do you also do 4 fingers down for the back also?
This is my question also.
Hi bro, thanks for the video. I have a question. Will each design eg. 11inch wide be used on all sizes of shirts - from small all the way to 3xl? Or do you change the logo sizes based on the t-shirt size?
But the transfer company’s have specific sizes.. also how do I select hot split on transfer express?
I did a 7 x 11 print for a back print. It’s a tall style print you think I’ll be ok?
Great video, hit “save” so I can come back later for reference.
Keep up the hard work!
Love this but I wish you did the sleeve. I really need sleeve dimensions but I cannot find any video with that info
you can make it whatever size you want. you dont need anybody to tell what size it should be. measure your sleeve and create your design to fit those dimensions. thats all it is
You’re right. I’m overthinking it. Launching soon and you’ve been a HUGE help. Thanks!
I’ve seen 2x11 as fairly common.
Totally agree
Always dropping gems !!!
This one was perfect timing for me, appreciate it Brandoh. Been wondering Is there a finger length from collar you like to use when putting designs on the back? Also have you been using supagang for most your orders now or do you still use the other sizes too?
Hi Brando! Thank you for all of this amazing info!! I really like the size of the back print on the west side tshirt! What dimensions do you use for that?
One thing I used to do for my chest pieces was print my designs out on printer paper.. since they were smaller designs I wanted to make sure the text was legible, the design looked good, and I could lay it on the shirt for a visual.. doesn’t work for Art larger than 8.5 x 11
Yes it does, just print half and half, then connect
Ok. Subbed. Great sharing of your process
Thank you for this video.
Appreciate this Bro! I was doing what you’re saying but you just CONFIRMED IT! Thanks as always!
Very helpful. Thanks
Thanks for the game big homie
Do you have to change the size of the design if the shirt is a different size?
thank you for this
Thank you brother
Big Brandoh, I know you do the 4 finger measurement for t-shirts. Do you do the same thing for shirts for females?
thanks for all the info you give💪🏿💪🏿💪🏿💪🏿 quick do you have any recommendable graphics designers you deal with
check the description box all the way at the bottom
thank you
Big bro if you only new how much your videos help me. They are really my classes.Keep the hood content coming 💯💪🏾💯💪🏾💯
Hello! Always I watching you video, you have really nice design’s. You do digitise? Or you can recommend some good digitiser companies? I start to do embroidery and i need someone good for digitise. Thank you! Gabriel
Always a great video Brandoh. Do you make different size of the same design? Reason being, a 12 inch back design would look to big on a small shirt or would you only use the 12 inch design on all size shirts?
Do you do same measurements for all shirt sizes? For example your 6x6 for small-xxl?
i dont change design size based on shirt size. i use the same size design on small shirts and 3X shirts
Great video and information. Love your channel. I'm your latest subscriber
What model/style Alstyle shirt is that if u don't mind?
I gotta question brandoh. Just starting and I wanna do like my first like big sale of my shirts. How many shirts should I order and what sizes should I concentrate more to get?
Awesome SupaTips! 🙌💎
Hey Brandon! Because you do Custom designs, do you copyright each design? I have so many phases in my head. What should I do?
Keep up the good work .
Always appreciate the knowledge! Question, do you get any problems pressing front and back pieces on hoodies? I feel the front pocket to be a little bit of an issue for me.
Love your Tshirts you wear always tight neck long sleeves... what brand are they?
alstyle
Thanks bro
Yes I needed this information.
Great video
thanks for watching
THANKS BRA ON POINT ALWAYS
The new intros lol 🔥❤️💯
I want one of those Printing Money tees in 3X unisex please! 😁
Brandoh , love your channel been trying to get the complaint dot with the LA cap with grizzly on the side or go grizz please let me know! tying to support those that have helped me in this industry and your #1 i have been hooked since 2019 im just now in position to give back to one of the goats I look up to please hit me up Appreciate all the knowledge !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Very valuable 🥰🙏
Beast!
This has me measuring shirts at my day job. 💀 💰
❤❤❤
DAM rip KING
Cooo
Thank you 🙏🏿 ❤️💯