VFD and Blower

A 1/8HP VFD runs a 3 phase 230V 1/20HP motor. The VFD is powered by single phase, 120V input, and outputs 230V 3 phase. The wiring to the motor is temporary until I get proper cables.
More specs of VFD:
Name: GE Fuji Electric
Model: AF-300 mini series
Frequency range: 0-400Hz
Carrier frequency range: 750Hz to 15kHz
Rated current: 0.7A (output)
V/Hz mode only (scaler torque)
More specs of Blower:
Name: Dayton Blowers
Model: 3HMJ5
Voltage range: (208-230V)
current: 0.45/0.35A
RPM: 1410/1630
Airflow: 257.6cfm at 60Hz
Ignore the mess in the background.

[@JS106351]

Nothing else is really needed to connect to the vfd; the only thing else I had to do was program it (which for the most part it was already preset out of the box). I could connect an external potentiometer and switch but those were already included in the vfd.

[@kuzzinvinnie]

what signals other than 120v to the vfd and 230v from the vfd to the blower are needed?

[@lincolncontinental]

Where did you get that blower from, what's the model?

[@JS106351]

Lincoln Continental Hello, the blower that I used was a Dayton model # 3HMJ5. I bought the blower used on eBay for around $40.

[@obliviga]

yummy