We need to know what edc triggers are proven to be reliable. Your brand has the capital to carry out an extensive round test with factory glock pistol and magazine. Thanks for your content and passion.
More likely to install the Glock performance trigger than the Pyramid - but still no. Going to install the GPT in my home defense gun (19X) as soon as it arrives though.
Hi Lenny. I LOVE your “How To” videos. They are very helpful and easy to follow. Even for someone like me… an aircraft mechanic with 40 years of military and commercial airline experience. I have used a couple different videos so far. I’m going to install the “Pin & Extended Controls Kit along with the 3.5 Trigger Assembly next. Wish me luck!!
Thanks to your instructions it took less than 10 minutes, function checks were excellent. Will get to the range this week. The instructions were 100% spot on.
@@Soulsaber_7 The box mine came in said the trigger was not for LEO and not NIJ certified. I'm about to graduate from my academy and probably wouldn't carry on duty but honestly for off duty carry purposes I think this thing is phenomenal!
@@LegoLikeDaBlocks24how has it held up? Why wouldn’t you carry it for duty? Is it because you want a heavier pull weight for less chance of an ND or because it’s less reliable than the original?
Just got mine in the mail from your store 20 minutes ago. I didn't time it but after watching your video many times, I actually did it. I'm old old man known for breaking off the spark plugs when trying to change them so I do feel redeemed. Trigger feels awesome. Can't wait to get back out to the range this week. Thanks so much.
@@Joaquin546 I just shot it again a week ago. I have probably 400 rounds on the new trigger now. In my opinion the first 100 rounds didn't seem a lot better but now it's beautiful. The break and reset are just terrific. I don't have a trigger gauge but between 3 and 4 lbs. I'm guessing after 60 years of shooting.
Thanks for this video, Lenny! This was the first time I really modified my Glock, and your video step-by-step guide got me over the first time jitters. Now for the G48's gaw-dawful trigger.
Eagerly watching this video as educational and then I lost it at 6:08 LOL..... I bet your wife did too. Thanks Lenny for adding some humor into the mix.
I used a lone wolf skinny disconnecter with my performance trigger. Shorter reset and even lighter. Point being you can use aftermarket disconnectors with the performance trigger to make it even better. The ghost unit performance 3.0 is the best. I had to mess around and find out. Yeah it’s $40 but I think it’s best for stock trigger housings.
@@Sercer25 definitely a better trigger. Yes a connector would have been cheaper but, I value my warranty more than the few bucks I would have saved. Something most people don’t know is, putting aftermarket parts in your Glock voids the warranty.
@scotttwombly6528 that's why I bought one instead of the Apex. The night sights are OEM Glock. The trigger is a GPT gen2.5, the magazine is a spacer sleeved 19 mag. Try to stay as true to mfg as possible. I did go with a Sylvan Arms threaded barrel and 1oz three port compensator. But that and the sleeve are the only thing that's not Glock oem on my 26gen5
Well explained! I can’t stand seeing people say “I need a heavy trigger to be safe” then you see them pulling shots off paper. That’s someone else you didn’t intend to hit in a defensive situation. Just like you see police emptying mags and hitting bystanders with New York triggers.
This trigger upgrade will probably help your indoor range experience with paper targets. However, if you practice outdoors shooting and moving after drawing from a holster then it probably won’t make “that much” of a difference since your focus is on the drill. I still shoot gen 2’s and 3’s, I never wanted to mess with the factory triggers but knowing this kit is from Glock it’ll probably give you some peace of mind.
Thank you Lenny. Just installed the Enhanced Trigger, and Extended Slide Lock and Extended Slide Release. You are easy to follow and gave me a few laughs along the way.
Thanks for your tutorials and videos. Very valuable, useful. I and my friends who have GLOCKs watch your shows in Lithuania. It's a pity that buying from you in Lithuania is expensive due to customs and fees. Keep up your tutorials, respect to you. :)
I got mine in a couple of days ago direct from Glock. Got it installed and gonna shoot it tmrw for first time. From dry firing, it seems like an upgrade, as many other reviewers have reported. Thanks for this video Lenny. Not only do you explain the product, you teach a mini armorer’s course and teach a fundaments class. I’m glad I got a chance to meet you at your store in San Diego a couple of times when your guys installed some parts on my duty G17 & G26.
Thanks to Lenny's great Vids... I have cleaned & tweaked all my Glocks. Lenny makes it easy from that roll of blue masking tape to all the things he sells
Knowing Glock this "performance Trigger costs MORE then the other triggers, I tested it and it's exactly like the G30sf trigger!!! The shorter grip to trigger distance has been shortened and it's a very nice stock trigger for Glock, can't wait until I get my Glock 30sf ported and all custom work with the .460 Rowland conversion!!!! It's literally an auto .44 Magnum!!
I still carry a gen 4 cause I like the finger grooves so its unfortunate its only compatible with gen 5. I honestly don't mind Glock going back and fourth on finger grooves every other generation because it gives people options as far as what they want to carry and I've even seen people go so far as to remove finger grooves on a gen 4. Glad its an option far overdue from Glock but Apex Wilson Combat and Zev beat them to the punch a while ago on aftermarket triggers.
My Pyramid trigger finally arrived for my G45. It breaks at 3.5-4, has a wonderfully short reset, and looks great! I actually replaced a Timney trigger with the Pyramid trigger because I found the Timney to be finicky and too light for carry. Really like the Pyramid!
I have been using glock factory triggers for years. Have never installed an after market trigger , so I can not comment on all the after market trigger assemblies. But I just installed THE GLOCK performance trigger and headed to the range today :). It was eye opening !!!! Still normal take up but with hardly no pressure , then hitting a medium wall ..but noticable !!! Then just an amazing CRISP BREAK :) !!!!! Then relaxed to the very audible reset. It was close and crisp :) AND BANG !!!!!! That sexy sound of lead SPANKING STEEL !!!! There is a reason Mr. Magill ordered THOUSANDS of these ...they are far and away WICKED SHOOTERS :) There in stock at the real GLOCK STORE ..FACTORY DIRECT :) No bs you get Glock reliability with a sweet ass trigger ...I will do a 4000 round review in 3 weeks...let's hope I'm still this happy in 4000 pew pew's hahahahah😂😂😂
@Kosem72 Does it take any of the very long pretravel out, long reset and mushy, spongy break out? With the Timnely for sure does and for those that don't like pre travel it can be adjusted. Money wise I can see someone going with the Glock Performance trigger if it helps because all mine where beyond reason. The best out of all broke at over 6 lbs. most of them 6 1/2 to 7 with that very long pre travel, horrible spongy break and long reset. Glock has been a long time coming to do something.
@Average GIJoe Outdoors As Mr. Glock said, it takes a "little" of the pre travel out and as he said still a long reset. Yes it may be cheaper but you still will not get what the Timnely will do if as person is looking for a true Comp. style trigger. You can even adjust the pre travel on the Timnely if one wants to. I did one that way it's a little to touchy with no pre travel. Pay $100.00 dollars get a $ 100.00 dollar trigger, pay $ 130.00 - $ 160.00 and get even more if that's what a person is looking for. It's in what a person is looking to get out of what they are paying for all in all. I like little pre travel, clean crisp break with little reset, I get all that and more out of my Timnely triggers. Get them on sale at Midway sometimes $129.00.
Thank you for every safety reminder. Cannot be said enough times! As for the trigger replacement - I'm lucky I can still choose - so CZ P10-S,C,F,SC or whatever. No hassling with triggers.
@@leehitsslots9133 I'm going to see. I have a gen 3 and gen 4 G23. My cousin has a G23 gen 5. Last month we literally swapped everything including LWD conversion barrels. I'm gonna get a range session next week and this will be the 1st thing we try. By the way , they are now 89.99 on botach.
@@leehitsslots9133 i did have to swap the slide plates to fit. The 2 channels are more pronounced. I use the strike industries because the 3 pack was 12 bones. I did mount the g23 gen 5 onto the gen 4 and everything worked.
I picked up a couple right after they came out direct from Glock. I like them a lot, and they're much better than the Timney I tried. I wish I could get my money back for that POS.
Thank you for this. You made it easy to swap it. Super happy with the trigger. Simply awesome. Never really liked the Glock before, but now I might use it instead of the USP.
I got mine and been using it for 2 months now. I notice the reset was a bit rough at first but after a while, it got really smooth. Really liking the whole thing and glad glock finally released a trigger update. I never felt comfortable with after market triggers because I heard a lot of horror stories from NDs. But these are straight from the factory so you know it is safe.
I've developed nerve damage in my trigger finger and thumb so I am looking for a trigger that is lighter and less travel. Considering this one and wondering if this would be what I need.
I wonder how it compares to a stock trigger assembly using only the double-diamond 3.5-lb linkage. I have one on my 17 frame since I didn't want to jump up to the full DD trigger (well it wasn't in stock at the time). from the video, it sounds like it'll be a little shorter. might have to give it a try
Not everyone has accidentall discharges.😅 But asking your wife to jiggle things is asking for one.lmfao.thanks Lenny needed a good laugh. Love the video.
Mr Magill: Unrelated comment/question. Would you consider making a video about the do’s and don’t’s of relocating a successful business to another state? Challenges or surprises other entrepreneurs and family business owners should be aware of for a successful move? Thanks as always for decades of great content! 🤠🇺🇸
The description says "Gen4/5" but the housing is clearly a Gen 5, does this mean that Gen 5 triggers and parts will work in a Gen 4 so long as you're using all Gen 5 parts?
Love the content brother. I just cannot accept " you will have an ND at some point". One MUST understand The 5 weapon safety rules whole heartedly. never deviate from them. To all gun owners out there. Please be safe.
@@robertreynolds2726 Awesome I’m getting one pretty soon for my 17, do you have a round count estimate of how many has been put through it since the new trigger was installed?
Glock has a not so great grip angle and a trash trigger. Having said that, GS has enough parts (currently redoing my G22) that I'm actually coming around. Still not a fan of the 22 degree grip but with good sight options, better pins, much better trigger and springs, I can fix everything apart from the angle. Won't ever really be a glock fan, but I will say with the parts out there, it's very capable and you can make it accurate and consistent. So I appreciate the GlockStore for having good parts availability with product videos so I can fix all the complaints I have. I carry Glock on duty for work so sticking with the same platform off duty is generally preferred.
Would you install this trigger in your carry Glock?
I wouldn't, but that's just me. But I did install one in my G47 earlier this week.
We need to know what edc triggers are proven to be reliable. Your brand has the capital to carry out an extensive round test with factory glock pistol and magazine. Thanks for your content and passion.
More likely to install the Glock performance trigger than the Pyramid - but still no. Going to install the GPT in my home defense gun (19X) as soon as it arrives though.
Naw I'll stick with my stock
I wouldn't. Mostly out of liability. My father and I have bought many things from your store in the past. Unfortunately I no longer own a Glock.
6:02 Perfectly set-up the joke... then the classic camera close-up. Lovin' it. 🤣
Yup... "we all call our wife to giggle it a little bit every once in a while" 😉
I was just jiggling it, and it went off in my hand!
I was like, what? 🤣😂
Lenny is making sure we are paying attention 🤣
I don’t even own a Gen 5, but I’ll watch Lenny all day long!!
But you do own a glock right? If not that's scary.
Tends to cover basic facts and becomes verbose in his videos.
😂 tell us ur a noob, without telling us ur a noob
@@azcop2 he just regurgitates what his gunsmiths tell him...he clearly doesnt really know shit, himself
@@kawikadavid8958 yea, 3!
Took me less than 10mins. Went from 4lbs 6oz to 3lbs 2oz. GREAT upgrade! Great walkthrough! Thanks for the tips!
Pyramid trigger or glock performance ?
"Arc of movement" is the term for the wobble effect when exercising reasonable Sight Alignment & Sight Picture. Great class Lenny.
Wow. I thought I was simply going to learn about an aftermarket Glock trigger but came away with much more. That last segment was a bonus. Thank you.
Hi Lenny. I LOVE your “How To” videos. They are very helpful and easy to follow. Even for someone like me… an aircraft mechanic with 40 years of military and commercial airline experience. I have used a couple different videos so far. I’m going to install the “Pin & Extended Controls Kit along with the 3.5 Trigger Assembly next. Wish me luck!!
Thanks to your instructions it took less than 10 minutes, function checks were excellent. Will get to the range this week. The instructions were 100% spot on.
@6:14 Witnessing Lenny make a “that’s what she said” joke without actually saying it was the best part of this video 😂
Dudes funny as hell.
Lmao
Just got mine installed yesterday. It's honestly phenomenal and one hell of an upgrade!
I really like it, because it's still approved for duty use, unlike most other aftermarket triggers.
@@Soulsaber_7 The box mine came in said the trigger was not for LEO and not NIJ certified. I'm about to graduate from my academy and probably wouldn't carry on duty but honestly for off duty carry purposes I think this thing is phenomenal!
@@LegoLikeDaBlocks24how has it held up? Why wouldn’t you carry it for duty? Is it because you want a heavier pull weight for less chance of an ND or because it’s less reliable than the original?
@@Soulsaber_7how has it held up? Any issues?
Just got mine in the mail from your store 20 minutes ago. I didn't time it but after watching your video many times, I actually did it. I'm old old man known for breaking off the spark plugs when trying to change them so I do feel redeemed. Trigger feels awesome. Can't wait to get back out to the range this week. Thanks so much.
What's your opinion on the trigger
@@Joaquin546 I just shot it again a week ago. I have probably 400 rounds on the new trigger now. In my opinion the first 100 rounds didn't seem a lot better but now it's beautiful. The break and reset are just terrific. I don't have a trigger gauge but between 3 and 4 lbs. I'm guessing after 60 years of shooting.
@@billhoppe2991no problems at all??
Thanks for this video, Lenny! This was the first time I really modified my Glock, and your video step-by-step guide got me over the first time jitters.
Now for the G48's gaw-dawful trigger.
Dropped mine in today...I dig it. I like how it was a wider trigger face to contact more of your finger
Eagerly watching this video as educational and then I lost it at 6:08 LOL..... I bet your wife did too. Thanks Lenny for adding some humor into the mix.
I used a lone wolf skinny disconnecter with my performance trigger. Shorter reset and even lighter. Point being you can use aftermarket disconnectors with the performance trigger to make it even better. The ghost unit performance 3.0 is the best. I had to mess around and find out. Yeah it’s $40 but I think it’s best for stock trigger housings.
I got mine from Glock in January or February and installed it in my Glock 19. Took me from a 5.5lb trigger to a 4lb trigger.
Worth it over the factory trigger? Seems a connector would be cheaper.
@@Sercer25 definitely a better trigger. Yes a connector would have been cheaper but, I value my warranty more than the few bucks I would have saved. Something most people don’t know is, putting aftermarket parts in your Glock voids the warranty.
Has it held
Up? Any problems? How many rounds have you put through it with the new trigger in there?
Last time I asked my wife to jiggle it a little bit, we were "surprised" with our third child - both of us almost 40. True story.
😂😂🎉🎉🎉🍻
Damn bro she got 😳 that jiggle 😢
Bro... it has three safeties and you sent a round down range? At least you love the target 😂
Just installed mine. Makes an absolute world of difference
How has it held up? Any problems?
I just received the Glock Performance Trigger for my G19X, thanks for the great installation video!
Love this trigger. If you like a Glock with Glock parts. Get one. This will put a dent in aftermarket products. Good job Glock.
@scotttwombly6528 that's why I bought one instead of the Apex. The night sights are OEM Glock. The trigger is a GPT gen2.5, the magazine is a spacer sleeved 19 mag. Try to stay as true to mfg as possible. I did go with a Sylvan Arms threaded barrel and 1oz three port compensator. But that and the sleeve are the only thing that's not Glock oem on my 26gen5
Well explained! I can’t stand seeing people say “I need a heavy trigger to be safe” then you see them pulling shots off paper. That’s someone else you didn’t intend to hit in a defensive situation. Just like you see police emptying mags and hitting bystanders with New York triggers.
This trigger upgrade will probably help your indoor range experience with paper targets.
However, if you practice outdoors shooting and moving after drawing from a holster then it probably won’t make “that much” of a difference since your focus is on the drill. I still shoot gen 2’s and 3’s, I never wanted to mess with the factory triggers but knowing this kit is from Glock it’ll probably give you some peace of mind.
This right here
@Average GIJoe Outdoors I wouldn’t know, I have never competed. I just practice for self defense.
@@EchoSigma6 you have to complete to practice for self defense. Otherwise you are not testing yourself under pressure.
@@bloodycrepe
Point taken.
Any problems? Has it
Held
Up
Thank you Lenny. Just installed the Enhanced Trigger, and Extended Slide Lock and Extended Slide Release. You are easy to follow and gave me a few laughs along the way.
Thanks. I just did my first trigger change with your help!!
Lenny is a good teacher. Everything was really clear.
Thanks for your tutorials and videos. Very valuable, useful. I and my friends who have GLOCKs watch your shows in Lithuania. It's a pity that buying from you in Lithuania is expensive due to customs and fees. Keep up your tutorials, respect to you. :)
As always, very detailed and very educational. Great installation tips. Thanks!
I got mine in a couple of days ago direct from Glock. Got it installed and gonna shoot it tmrw for first time. From dry firing, it seems like an upgrade, as many other reviewers have reported. Thanks for this video Lenny. Not only do you explain the product, you teach a mini armorer’s course and teach a fundaments class. I’m glad I got a chance to meet you at your store in San Diego a couple of times when your guys installed some parts on my duty G17 & G26.
Is it really worth it or better to put in an apex
I stopped watching when he said you need a third hand to jiggle it a little bit. Had to get my wife to follow Lenny's directions.
😂
😂😂😂😂
Can't get enough of this Lenny kid....
These vids saved my butt a few times 😂
Pro tip push on top of the slide stop just above the spring when pushing the pin out
Got mine the day they came out!! Love it!
Thanks to Lenny's great Vids... I have cleaned & tweaked all my Glocks. Lenny makes it easy from that roll of blue masking tape to all the things he sells
Yes you can change the shoe and the connector to improve the trigger performance.
Knowing Glock this "performance Trigger costs MORE then the other triggers, I tested it and it's exactly like the G30sf trigger!!! The shorter grip to trigger distance has been shortened and it's a very nice stock trigger for Glock, can't wait until I get my Glock 30sf ported and all custom work with the .460 Rowland conversion!!!! It's literally an auto .44 Magnum!!
I still carry a gen 4 cause I like the finger grooves so its unfortunate its only compatible with gen 5. I honestly don't mind Glock going back and fourth on finger grooves every other generation because it gives people options as far as what they want to carry and I've even seen people go so far as to remove finger grooves on a gen 4. Glad its an option far overdue from Glock but Apex Wilson Combat and Zev beat them to the punch a while ago on aftermarket triggers.
i love my 23g4's
Replacement end cap now ships for Gen4
I handled it at the german gun show last month. I couldnt feel a huge difference. Also my gen5 is well broken in so i dont think im going to upgrade
Well imagine a broken in performance trigger
My wife and me were there last week end 👍👍
Thank you so much, Lenny!
My Pyramid trigger finally arrived for my G45. It breaks at 3.5-4, has a wonderfully short reset, and looks great! I actually replaced a Timney trigger with the Pyramid trigger because I found the Timney to be finicky and too light for carry. Really like the Pyramid!
You should try a Johnny Glocks trigger. Jesus the dude has them dialed. I went with the “defensive” one. Awesome.
I have been using glock factory triggers for years. Have never installed an after market trigger , so I can not comment on all the after market trigger assemblies. But I just installed THE GLOCK performance trigger and headed to the range today :). It was eye opening !!!! Still normal take up but with hardly no pressure , then hitting a medium wall ..but noticable !!! Then just an amazing CRISP BREAK :) !!!!! Then relaxed to the very audible reset. It was close and crisp :) AND BANG !!!!!! That sexy sound of lead SPANKING STEEL !!!! There is a reason Mr. Magill ordered THOUSANDS of these ...they are far and away WICKED SHOOTERS :) There in stock at the real GLOCK STORE ..FACTORY DIRECT :) No bs you get Glock reliability with a sweet ass trigger ...I will do a 4000 round review in 3 weeks...let's hope I'm still this happy in 4000 pew pew's hahahahah😂😂😂
It will not come close to the Timnely Alpha Comp. trigger that's been out for sometime now.
@Kosem72 Does it take any of the very long pretravel out, long reset and mushy, spongy break out? With the Timnely for sure does and for those that don't like pre travel it can be adjusted. Money wise I can see someone going with the Glock Performance trigger if it helps because all mine where beyond reason. The best out of all broke at over 6 lbs. most of them 6 1/2 to 7 with that very long pre travel, horrible spongy break and long reset. Glock has been a long time coming to do something.
@Average GIJoe Outdoors As Mr. Glock said, it takes a "little" of the pre travel out and as he said still a long reset. Yes it may be cheaper but you still will not get what the Timnely will do if as person is looking for a true Comp. style trigger. You can even adjust the pre travel on the Timnely if one wants to. I did one that way it's a little to touchy with no pre travel. Pay $100.00 dollars get a $ 100.00 dollar trigger, pay $ 130.00 - $ 160.00 and get even more if that's what a person is looking for. It's in what a person is looking to get out of what they are paying for all in all. I like little pre travel, clean crisp break with little reset, I get all that and more out of my Timnely triggers. Get them on sale at Midway sometimes $129.00.
How did it hold up? Any problems?
@AverageGIJoeOutdoorsany problems with yours? how many rounds have you put through it with the new trigger?
Thank you for every safety reminder. Cannot be said enough times!
As for the trigger replacement - I'm lucky I can still choose - so CZ P10-S,C,F,SC or whatever. No hassling with triggers.
Went to the Glock store in Nashville and got me a G47 and one of these installed. Haven't shot it but it feels really good dry firing
Well damn I’m still in love with gen 3 I don’t have any gen 5
i raced gen3 glocks for years with lots of wins - Ghost trigger setup - the thing rocked :D stick with it
6:09 “ask your wife to jiggle this a little bit, who knows where that’s going to lead to” and camera pans in on Lenny 😅
Bought 2 and they fit in my G23gen4. It feels funky but good. The other is in my g47 and feels awesome.
thanks wanted to know if it would fit in glock 23 gen 5
@@leehitsslots9133 I'm going to see. I have a gen 3 and gen 4 G23. My cousin has a G23 gen 5. Last month we literally swapped everything including LWD conversion barrels. I'm gonna get a range session next week and this will be the 1st thing we try. By the way , they are now 89.99 on botach.
@@tanhelmet thanks for the info bro i think you just change the ejector then you’re good
@@leehitsslots9133 i did have to swap the slide plates to fit. The 2 channels are more pronounced. I use the strike industries because the 3 pack was 12 bones. I did mount the g23 gen 5 onto the gen 4 and everything worked.
sorry for bothering you one more thing could you check the barrel compatibility with gen 4 to gen 5 barrel thanks
Picked up one today. Will be installing on my G19 soon and yes it’s my carry.
Fantastic video Lenny! I look forward to visiting your store in November 2023. Thank you
I picked up a couple right after they came out direct from Glock. I like them a lot, and they're much better than the Timney I tried. I wish I could get my money back for that POS.
Those pyramid triggers r badass
Thank you for this. You made it easy to swap it. Super happy with the trigger. Simply awesome. Never really liked the Glock before, but now I might use it instead of the USP.
Sad the stock triggers are so despised by many
They are not that bad at all glock 19 gen 4
Rightfully so.
Progress and innovation doesn't wait for slackers that have been resting on their laurels for over three decades.
Feel like the blade shape of the shoe contributes to me pulling the gun in an unintended direction
More sad that they’re right.
I only carry stock. I don’t need a lighter trigger.
Lenny you do an excellent job on these how to videos!!
Would i be able to use it for my duty glock?
Want one of these in my 48. Hope Glock announces the slimline GPT ShotShow ‘25
Shoe geometry does line up. I have the GLOCK performance trigger in my G34 gen_5 with a gen_1 pyramid trigger shoe installed.
The biggest Glock fanboy on TH-cam, is always changing stuff on the Glock.😂
I got mine and been using it for 2 months now. I notice the reset was a bit rough at first but after a while, it got really smooth. Really liking the whole thing and glad glock finally released a trigger update. I never felt comfortable with after market triggers because I heard a lot of horror stories from NDs. But these are straight from the factory so you know it is safe.
Top quality wisdom and content for breaking down a Glock with detail; thanks!!!
Thanx for the video, simple and feels great, can't wait to go to the range and try it
Ladies and gentlemen, I present to you Lenny, the only man I know that explains what a roll of tape is. Must be a Californian thing.
I've developed nerve damage in my trigger finger and thumb so I am looking for a trigger that is lighter and less travel. Considering this one and wondering if this would be what I need.
Got mine today, thanks GlockStore
Just bought one today for my glock 45 mos with the Johnny Glocks upgrade.
Has it held up? Any problems? How many rounds have you put through it with the new trigger in there??
Great instructions. Easy install. Now I’ll order one for my g45. Thanks
hello from PUERTO RICO!!!
Good video. I stopped by the Nashville GS, very nice!
I respect the hell out of Glock but so thankful I use sig and not as many pins to hammer out and sig using the swing lever. But very cool video thanks
6:10
that camera zoom. 😏
If the whole slogan is glock perfection why is it as soon as you buy one you replace everything 🤣😂🤣👌 Perfection
The perfection is in the marketing strategy. Duh
I wonder how it compares to a stock trigger assembly using only the double-diamond 3.5-lb linkage. I have one on my 17 frame since I didn't want to jump up to the full DD trigger (well it wasn't in stock at the time). from the video, it sounds like it'll be a little shorter. might have to give it a try
Thank you for a well-prepared tutorial.
Excellent instructional video, thank you, installed in less than 10 minutes
How has it held up? Any issues?
Not everyone has accidentall discharges.😅
But asking your wife to jiggle things is asking for one.lmfao.thanks Lenny needed a good laugh. Love the video.
Lol true. But think about it…you may have had one at the range. Of course, that’s the place to have it LOL. But can still be considered an AD.
You can use it in a .40 S&W too, just swap the ejector and you should be good to go.
Great content and hope to make it to your store some day. Thanks for sharing.
Mr Magill: Unrelated comment/question. Would you consider making a video about the do’s and don’t’s of relocating a successful business to another state? Challenges or surprises other entrepreneurs and family business owners should be aware of for a successful move? Thanks as always for decades of great content! 🤠🇺🇸
The description says "Gen4/5" but the housing is clearly a Gen 5, does this mean that Gen 5 triggers and parts will work in a Gen 4 so long as you're using all Gen 5 parts?
6:08 my wife would punch me… then I would still have to punch the pin out 😂
Love the content brother. I just cannot accept " you will have an ND at some point". One MUST understand The 5 weapon safety rules whole heartedly. never deviate from them. To all gun owners out there. Please be safe.
Is the Glock performance trigger the wide trigger
Great video - very thorough as always
When will these be available for the 48 ? thanks John
In my part of country, we call the middle finger " The California Howdy"!!, or "VATEK HOWDY"!
Looks like the Timney Trigger.
I have to say, I am warming up to ya lenny! But it sucks, I live in califrornia. So 19 17 is all I got.
Your website shows it's for Gen 4/5, I ordered one for my Gen 4 34 and Gen 5 45. We shall see if it works in the Gen 4 34.
I ordered this back in February and just got a shipping notice today. Looking forward to it
How has it held up? Any issues?
@Rolluphim it's been great. No issues. All glock trigger should be this
@@robertreynolds2726 Awesome I’m getting one pretty soon for my 17, do you have a round count estimate of how many has been put through it since the new trigger was installed?
What is the best Traeger for the Glock 21 and mag release button
the Glock Performance Trigger doesn't reset to the rear for dry firing.
16:23 hello, where can we find the guide "cleaning and oiling your glock performance trigger" ?
In the package 😂
@@BWHeitmann not in mine
Will glockstore be getting the g flex trigger?
Will they make one for the slimframes? It would be nice since so many people carry them.
Dose it fit or would it work on a 43x mos or is there something coming for the 43x ???
I run the Glock store pyramid trigger. It’s good to go.
Glock has a not so great grip angle and a trash trigger. Having said that, GS has enough parts (currently redoing my G22) that I'm actually coming around. Still not a fan of the 22 degree grip but with good sight options, better pins, much better trigger and springs, I can fix everything apart from the angle. Won't ever really be a glock fan, but I will say with the parts out there, it's very capable and you can make it accurate and consistent. So I appreciate the GlockStore for having good parts availability with product videos so I can fix all the complaints I have. I carry Glock on duty for work so sticking with the same platform off duty is generally preferred.
Glock Perfection TM. Decent trigger sold separately.
Awesome Lenny Period!!!
Where do I find the “plus” connector?