awesome video!!!best part is not a single word was said. remeber that all ya ego centered you tubers that feel like we all gotta see ya and we all have to hear what you wanna talk about. this gave me everything i wanted to know in less than 8 min! not a half hour or more of the monetized fools that think time = content. when its actually the short and sweet no commentary videos we all look for and watch....
This video has given me the confidence to engrave something on my glock. Although I'll have to practice on other materials first since it's been a while since I've used a dremel LOL
I'd need half a gallon of scotch in me to keep my hands that steady. Jesus. Been following you work for ages, keeps getting better and better man, keep it up! Great content too!
What rpm are you using with the carbide bit when you are cutting in the border? When i cut mine in it leaves a lot of slag behind still attached that blocks my view. I have to stop and scrap it away constantly so I can see my pencil line you don't seem to have that problem.
To avoid the slag you just need the cutting side of the ball on the outer side so "right" side of ball cuts better but adds the challenge to not slip. Practice a bunch on your glock box
What bit are you using in the rotary tool to get such smooth lines? I've watched a lot of videos and nobody has such smooths lines like you do and it has to do with that bit. So if you can please share the knowledge id really appreciate it
Beautiful job looks great! Would love to know what bits you're using for your border, if you don't mind. Would appreciate any help. Keep up the great work
Did you just use paint inside the borders? I have a black CZ p10 with a modified slide and gold barrel and hardware. I’m wanting to paint it black,gold and grey camo with black stippling. Since the frame is black, should I go about it like you just did? And when I stipple it, the stroking will be black? Or would it need painting?
To refine the edges/make that line look good. If you notice when he first makes the switch to the round bit the place he's gonna touch up looks bumpy or the line have inconsistent depths kinda looks ribbed and that bit is smoothing it out making it one flat/even line
aftermarket frames are available, you just need to transfer to an FFL dealer. Sig's are just hassle free when upgrading the grip module, you are just going to pay a much higher price for a quality and functional purpose module. Kind of like the Wilson Combat module, it looks good, but the texture is not great, not bad for $57 though
awesome video!!!best part is not a single word was said. remeber that all ya ego centered you tubers that feel like we all gotta see ya and we all have to hear what you wanna talk about. this gave me everything i wanted to know in less than 8 min! not a half hour or more of the monetized fools that think time = content. when its actually the short and sweet no commentary videos we all look for and watch....
Thanks man! I’m glad it helped, That’s what we are trying to do.
I wouldn't have been offenfed to hear someone say what the orane paint was, cerakote.or regular paint
I agree short and sweet str8 to the point I love it. 🔥
The texture looks perfect and borders are outstanding. Nice work.
This has to be one of the nicest jobs I have seen outstanding 🏆
Would have liked to see your method for colored border and how you went about engraving WT on the side, good job
One of the nicest custom jobs i have seen, well done.
Impressive! You sir are a skilled craftsman!
What drill bit do you use for the lines? And what stipple bit is that? This is so sick.
This video has given me the confidence to engrave something on my glock. Although I'll have to practice on other materials first since it's been a while since I've used a dremel LOL
Hell of a craftsmen very nice job!
I'd need half a gallon of scotch in me to keep my hands that steady. Jesus. Been following you work for ages, keeps getting better and better man, keep it up! Great content too!
Thank you very much!
You are a true artist, that is true skill & talent. Great work
Damn you do good work, looks really good. I could watch these videos all day long.
COLOR AND STIPPLING…is fantastic. “Orange” border…not-so-much. GREAT work!
Love the magwell
Please make a video how you polish the frame undercuts. I really like your videos.
Most badass glock ive seen! Congrats
Beautiful work by the way
looks dope, bud! mind me asking what carbide burr you're using to scribe your outline?
This is an amazing job
At first I said noooo, then I said yes 🙌🏼
Beautiful
Amazing work looks 🔥
Outstanding!
Nice work!!
True art work thanks for the ideas
Amazing
What rpm are you using with the carbide bit when you are cutting in the border? When i cut mine in it leaves a lot of slag behind still attached that blocks my view. I have to stop and scrap it away constantly so I can see my pencil line you don't seem to have that problem.
To avoid the slag you just need the cutting side of the ball on the outer side so "right" side of ball cuts better but adds the challenge to not slip. Practice a bunch on your glock box
Blaze orange and camo, to make sure people can see that it's invisible.
so cool to watch
What bit are you using in the rotary tool to get such smooth lines? I've watched a lot of videos and nobody has such smooths lines like you do and it has to do with that bit. So if you can please share the knowledge id really appreciate it
Best work I’ve seen yet!! Fkn A man good shit
This is a blazing hot mod.
Superb!
Beautiful job looks great! Would love to know what bits you're using for your border, if you don't mind. Would appreciate any help. Keep up the great work
Awesome!
Art!
What is that tool you're using to highlight the lines?? "A true work of art!"
Great video. Which stippling tip is that?
Amazing work. By any chance, do you know the name of the talon extension on it? Sorry, ask
Amazing 😮
Would like to know what dremel heads you used for the boarder and what was the stippling tip that you used.
Ever have flashing on the outside borders or have to clean them up? Or does the 9903/4 at an angel prevent that?
The orange color is applied with a fill pen so it pretty precise.
What is the first burr you are using here to get your lines in?
Need this done to my g48
Hit us up we can get you taken care of.
@@whitetailtactical1475 I definitely am going to hit you guys up today when thanks sick build
What tip did you use to get that texture?
Did you use the same bit as in your other videos? 9904 & 7103?
I did.
How much is this
Amazing!!
How did you get the cerakote around the borders without it running all over the place??? Must've been very time-consuming...
Paint color fill pen. It’s very precise.
Talk about a " lead time " from hell... Nice
How do people keep the black so shiny??
Cleaning it whenever you see hand or finger prints!
@TH-camr90-l5f no lol
This shit looks dope
Did you just use paint inside the borders? I have a black CZ p10 with a modified slide and gold barrel and hardware. I’m wanting to paint it black,gold and grey camo with black stippling. Since the frame is black, should I go about it like you just did? And when I stipple it, the stroking will be black? Or would it need painting?
Yes, stippling will be black. Paint first then stipple. Remove all the cerakote from you stippling areas first
What’s the reason for running the round attachment after making the line?
To refine the edges/make that line look good. If you notice when he first makes the switch to the round bit the place he's gonna touch up looks bumpy or the line have inconsistent depths kinda looks ribbed and that bit is smoothing it out making it one flat/even line
is that a custom solder bit?
DO YOU ACCEPT DELIVERIES TO CUSTOM FRAMES??
Cool looking thumbnail, but I still hate the front strap finger grooves.
Caption 4:40-5:40
How was the stippling holding up?
WHERE CAN I PURCHASE THOSE BORDER TIPS
Beautiful! What tips is used here?
Lools like its a micro x tip
What kind of “dremel” are you using?
Do you use 15W or 30W for that texture? How do you make your own burning tips?
What tip is this? Looks almost like an X
That came out really nice. What too are you using to burn in that texture?
Wood burner from Amazon with a custom made tip
Is the orange cerakote also or is it a different type or paint?
It’s cerakote. Applied with a color fill pen
How many rpm's do you use on the border tips?
probably 45,000, cutting with the ball tip at very high RPM takes less material off in a pass therefore makes it a little smoother
Where do i find a place tomsee options/prices, etc?
What kind of oaint did you yse for irange liner, and how did u paint?
It is cerakote applied with a color fill pen.
❤
Smh smh,🤦🏾♂️So f'ing good.
Badass
I’d be mad if someone put they’re logo on my frame when being stippled 😂
probably his personal piece, unless the customer requested it
How to gypsyfy your G19 :D
Класс
😮😍🫡
music and errythang. Gun porn fo sho lmao
Something about this just makes me uneasy
With the Glock, you are stuck with that frame since the serial number is there. Sig baby FTW!
aftermarket frames are available, you just need to transfer to an FFL dealer. Sig's are just hassle free when upgrading the grip module, you are just going to pay a much higher price for a quality and functional purpose module. Kind of like the Wilson Combat module, it looks good, but the texture is not great, not bad for $57 though
Just buy a canik It'll be better than that Glock even after you spent all that money on it right out the box
Nope
Not impressed
Why would you even comment this?
@@I.G_NLbecause he cant do it himself or tried and ruined his glock😢
Lol sure buddy
Amazing!! 👍
Thank you!