DON'T LOSE YOUR BITS! DIY Shop Wall Cabinet With Router and Drill Bit Storage.
ฝัง
- เผยแพร่เมื่อ 26 ก.ย. 2024
- I had my router bits laying all over the shop and I thought, enough is enough! So I came up with this Storage solution. Hope you guys enjoy!
Video Sponsor - bitsbits.com/ use the code "WALKER15" to get 15% off your order!!!
Plans for this build - gum.co/dbBREP
Check out my website for Woodworking plans, Tools I use, Merch and MORE! - www.walkersww....
Gearheart Industry Branding Iron - www.gearhearti...
Use the code walkerbrand10 for a discount!
Tools and materials used in this build (Affiliate links included)
Kreg Tool Company KHI-HINGE Concealed Hinge Jig - amzn.to/3alNe87
KREG KMA3220 5mm Shelf Pin Jig - amzn.to/30IyGMc
Delta 10" Sliding Miter saw - amzn.to/2QMq1nB
Sawstop Table saw - amzn.to/31bh8b6
JessEm Clear-Cut TS Stock Guides - amzn.to/2UkjOBO
Kreg Jig K4 Pocket Hole System - amzn.to/33MeZnG
Armor tool upgraded clamp for kreg jig - amzn.to/3b6M1SW
Milescraft push stick - amzn.to/38Lf3FE
Woodpeckers Precision Triangle Set - amzn.to/2QI0UCs
Arrow Fastener PT18G - amzn.to/2UFWDAR
Narex Chisel set - amzn.to/39g25j7
Mirka Deros Orbital sander and vac - amzn.to/2tiA7nW
Makita Drill and Driver - amzn.to/36JFV7k
Makita Cordless Tack Saw - amzn.to/37IYrOI
Makita A-99998 6-1/2" 60T Track Saw Blade - amzn.to/3bs8SHP
Makita 55-Inch Guide Rail - amzn.to/2QMuiHF
Milwaukee Tape Measure - amzn.to/33LdYfH
Pony Jorgensen Cabinet Master Clamps - amzn.to/2uSaB9d
Pony Jorgensen E-Z Hold Clamps - amzn.to/31kbfZD
Titebond III - amzn.to/2vwFQqM
Kreg Pocket screws for 3/4" material - amzn.to/2WHoMd8
Deft Interior Clear Wood Finish Gloss Lacquer - amzn.to/2QMv4EA
FILMING EQUIPMENT
Canon EOS Rebel SL2 DSLR Camera - amzn.to/2FOzlDV
TAKSTAR SGC-598 Shotgun mic - amzn.to/2WcKmnk
Rode VideoMic GO - amzn.to/33Kyz3C
External Lavalier Microphone - amzn.to/2Tb4HaG
GoPro Hero 7 Black Edition - amzn.to/2UiEeL9
Manfrotto PIXI Mini Tripod - amzn.to/2y1vCzV
GoPro Pro 3.5mm Mic Adapter - amzn.to/33JAZ2E
GoPro Dual Battery Charger + Battery - amzn.to/2JgnFt3
Rode VideoMicro Compact On-Camera Microphone - amzn.to/33JAV2U
SMALLRIG Cage for GoPro Hero 7 - amzn.to/2Ujo843
SanDisk 256GB Extreme MicroSDXC - amzn.to/39fiowl
60-Inch Lightweight Tripod - amzn.to/2RIwtP8
Softbox Lighting - amzn.to/2sLM0yw
Compact Tripod - amzn.to/2SaSc1L
Blue Snowball voiceover mic - amzn.to/2S3teB1
Canon EF 50mm f/1.8 STM Lens - amzn.to/2sICPPJ
Shop lighting - amzn.to/2Wg6D3p
Be sure to check out my website for other Projects, Blog posts, Plans and Tools I use! Walkersww.com
Organization makes me so happy. 😍
Meeee toooo
I watched your cutting board video. Had to watch this one. Wow what a difference. Keep up the good work.
Haha yea I've made alot of changes since then. I've thought about deleting the old ones and redoing them but it's good to look back at where you started lol.
Very good for keeping things organised and knowing were to find them.
I'm excited for sure!
Definitely going to be making this for my shop. I really dislike getting dust all over everything. Thanks
Right on! I also hate dust everywhere haha. That reminds me. I need to clean the shop.
That is a nice looking miter saw you have there.
Thanks! I love that thing.
Nice design!
Awesome build. I purchased your plan and I am excited about building the project. Thank you for taking the time to do the video and share your knowledge. The video was well laid out and was a confidence builder for me. Well done Sir.
Thanks so much for the support and kind words! Means alot. That's my goal. Good luck on the build!
Pretty awesome build there sir. Thanks for posting.
Thanks for watching!
Great cabinet and great video, Brando!
Thanks Jesse! It's been needed for awhile lol.
Nice cabinet
Thank you!
I need one of these. My bits are everywhere!
I will have plans soon! :)
very cool! thank you for sharing
Thank you for watching!
Awesome build...
Thank you!
Looks great!
Thanks!!
Nice looking shop cabinet Brandon! Thanks for sharing the video with us!💖👍👌😎JP
Thank you!
Your very welcome Brandon! Have a wonderful week!😎
Nice work!
Thank you!
Awesome project 💥👍🏼
Thank you!
How has the European hinges worked for you? My fear would be the hinge parts separating under the weight of the bits and the subsequent mess of bits on the ground.
so nice!
"WOW effect". I follow you, keep it up. SL
Thank you!
It's satisfying to have an organized shop.
Well done.
Side note: You don't have to drill pin holes so close to the top and bottom inside the cabinet. You sure aren't going to place shelves that low or that high.
Yea I got a little carried away haha. Maybe I want to store change up there OK! 😂😂 jk.
I like this idea bro..👍🏻😁
Thank you!!
Urwelcome bro..i already subscribe your channel..
Thanks!
Noticed you swapped to the Delta Cruze miter saw! Do you like it better than the Makita? Pros and Cons of either? Maybe a review vid. Also enjoy your videos. A lot of good ideas
I like it alot. It is a small footprint, cuts great, stays square. 👍
Plans available for this build here! -> gum.co/dbBREP
What is that attachment you have on your table saw, those tiny wheels pushing down on your work piece.
It's the JessEm ts stock guides. There is a link to them in the description 👍
Hello, I was wondering if you don't mind recommending me the specific Rampa insert & screws to use for a project.
I have a walnut butcher block (1 1/2 inch thick , 72 x 30 inches) that I am planning to install on top of a UPLIFT V2-Commercial frame but, i am not sure about the size | type I should use, Thank you.
I believe the frame has just 8 available holes to attach the top. Additional, on the far end of the table top I'll install 4 monitors that should weigh about 70 to 100 lbs max.
I'm honestly not sure. You would just need to get on the site and see what ones would work. I use the skd330 inserts and type KF bolts.
Hi, Brandon I was looking for help on building a cabinet with doors, 1/2 doors on a 3/4 cabinet. I'd like to know what kind of inexpensive hinges I can use? Thank you, Cheryl
Rockler has some pretty good deals on hinges. 👍
The reason I asked bc I'm not sure which to buy? I've seen every kind they and wood craft sell just not sure, which to buy. Thank you Brandon
Thinking about getting a new miter saw. How do you like that Delta?
I like it alot! Smooth and accurate. There is a link for it in the description 😉
What brand of hinges did you use and where did you get them?
Just the home depot ones.
Me suscribo.. y su like
OMG. I think I have twice as many bits even though I seldom use the 1/4 inch ones. I no longer have y 5hp Powermatic shaper so sometimes it's a Porter Cable 3-1/4 horse router on it's table
Thanks for the share and a ton of reference links. I know that I'm late to the post and this is an old video...but are you actually using foam as a sacrificial spoil board??...th-cam.com/video/9F-sS1qmCts/w-d-xo.html
What size screws do you usually use on a project like this?
1-1/4"
Thank you!
Good little build, it's probably been said already I think the only thing I would do for speed of finding them is number the drill bit by size (I've got metric and imperial sets).
Yea that's a good idea!