This was huge, the biggest help for me was when you were setting up the freedom civic you covered how to setup the cam and crank sensors in the ft550, this info was INVALUABLE to me as it allowed me to get everything setup and get a base setup to get it ready for the dyno. ill never forget that info and the fact taht you put it out there to help the community is beyond rad. and now this one is just another gem in your channel for information.
How on earth this channel doesn’t have 2 million subs is beyond me, Brent is a genius, a gentleman and a father we all wish we had…… Thankyou for teaching is daddy Brent and Jamie sending thanks from the UK
Why was I not notified about this video. TH-cam get it together. Everyone make sure you are subd and notifications on. Mine was, but still didn't get this notification on this one. J Swap Jason.
Good to see you again guys! Thanks for sharing that it's doable to put a FuelTech onto a B series with having to do crazy modifications! So now I want a FuelTech LOL
Jamie they make a adapter for that 240 plug that just plugs on the end to change that to 120 simple get them from any camper or RV sales place I was thinking instead of changing the plug in completely cause if u go some were their is a 240 plugin in will help run your AC & microwave more efficient plus iy will keep the wiring for getting hot and melting if you no what I mean no fires....
That boomslang is awesome! Also that trailer is so sick! You guys should just make that a sleep area and remove the desk. Maybe two small beds for both of you guys?
Now the remaining thing for me to have is a FuelTech myself...and the O2 unit. Can you use weird crank patterns with it? I'm going to do an EFI conversion on my FZR400 using a modified 2006-onwards R6 throttle body assembly (YCC-T E throttle) and the pulley has this 3 point 1 bar pattern on it and a magnetic pickup, all Hitachi. Before I would put a fine toothed trigger wheel and Hall effect sensor in there, there's the cam sensor to try and find a spot on the cylinder head...oh man... Stepping up the trailer game! Staying on the track, sleeping in and waking up right on the spot? That would be sick. Just thinking about it...the full racetrack experience!
Does the factory dash still work because you used a boomslang harness, or could you use a FuelTech harness and STILL have your factory dash work? I want to fueltech my S2000 but don't want to give up the factory dash, hence the question.
First off I want to say hell yeah bro love your videos and keep up the good work man. Anyways, I have a serious question. I was wondering what Honda engine should I buy for a starter car? I wanna build it very slowly because of funds so what’s a good engine to start with
so the crank and cam triggers settings dont have to be changed? Im specifically struggling to find if those sensors are rising or falling edge and what type of sensor it is. First time working on something like this so want to verify everything is correct before attempting my first start,
Once a crank sensor is installed on the engine, that would be the signal needed for the ecu to calculate timing. Only then can the distributor be eliminated.
A day without PFI is a boring day, happy to see you guys. 😊
This was huge, the biggest help for me was when you were setting up the freedom civic you covered how to setup the cam and crank sensors in the ft550, this info was INVALUABLE to me as it allowed me to get everything setup and get a base setup to get it ready for the dyno. ill never forget that info and the fact taht you put it out there to help the community is beyond rad. and now this one is just another gem in your channel for information.
I don’t do much fueltech but This type of video is great. it’s awesome to help others like this!
Sharing skills is one of the most important things a person can do. For many reasons.
How on earth this channel doesn’t have 2 million subs is beyond me, Brent is a genius, a gentleman and a father we all wish we had…… Thankyou for teaching is daddy Brent and Jamie sending thanks from the UK
Why was I not notified about this video. TH-cam get it together. Everyone make sure you are subd and notifications on. Mine was, but still didn't get this notification on this one. J Swap Jason.
Welcome back Guys! I love Fueltech and Pfi!
imagine a HP ACADEMY/PFI collaboration...the happy/friendly/humble vibe would literally meelt utube!!
top helpful content lads CHEERS!!
Definitely saving this for when I get my fuel tech!!!! Awesome way to help the small guys!!! Keep up the great work!🙏👍💪
Very nice trailer, I hope it treats you good. All of you deserve major luck..
That's why I came to pfi many years ago because the love and community!! Anddddd as a 98 crv awd Manuel this made me happy to see 😊
Cool video! Great details and tips, thanks Brent!
At first,I thought this was Rudnicks CR-V he just got from Trevor at Motion Auto lol. That would be a awesome Collab.
Same thoughts, its gotta be!
Thought the same as soon as brent said crv
Can you imagine brent and ruddy 😂 this should happen would be hilarious
I've been missing yall. Thanks for sharing your wisdom.
Well thats real Cool Brent your 1 A class dude sharing your knowledge for the guys and gals that dont have the $$$for a tuner 🤟🤟🤟🤟
This is awesome Brent thank you man you're a helluva dude
Good to see you again guys!
Thanks for sharing that it's doable to put a FuelTech onto a B series with having to do crazy modifications! So now I want a FuelTech LOL
So many screenshots thanks Brent and Jamie for the future help!!!
Jamie they make a adapter for that 240 plug that just plugs on the end to change that to 120 simple get them from any camper or RV sales place I was thinking instead of changing the plug in completely cause if u go some were their is a 240 plugin in will help run your AC & microwave more efficient plus iy will keep the wiring for getting hot and melting if you no what I mean no fires....
I didn't get my notification for yalls new videos either but Jamie's trailer is a unit. Big pfi tings coming at ya.
I'd love to see a video of setting up a K20 on Fuel Tech if possible. Thanks for the awesome content as always!!!
This can definitely help me with my project.
i'm waiting on a ecu for my fiat 1.1 turbo.
I want to learn my self how to setup everything and adjust.
Congrats on the trailer Jamie. It's sick.
This is a good one now need the same for a Rotary 13b
Pfi Speed forever!!! I hope all is well. Keep up the awesome work Brent, you are truly a legend!
Always appreciate the tuning walkthroughs! Also love seeing that flag on the wall! ;)
Thank you guys for videos like this ! Awesome trailer too !
Let's go pfi respect to you and the gang Brent 💯😎👍👌💪
Just another day with Brent being the man.Thanks again!
That boomslang is awesome! Also that trailer is so sick! You guys should just make that a sleep area and remove the desk. Maybe two small beds for both of you guys?
I'm planning on getting a RD1 crv and boost that awd little suv!
Love the trailer with the office! congrats!
I gotta make it to the track!! Gotta see you all again
Hell yeah guys and that trailer is rad af like perfect Batchelor pad/shop/carry-on 😅 ... peace n love fam keep it rad stay safe and build on l8z
I'd love to have a video like this for the k-series engine, mine looses sync on start up its very frustrating, its fine once it starts
I would love to do this to my crv. Kinda funny mine is the same color
Jamie's trailer is pretty sick!
Thank you for sharing this knowledge
With us bro. You are the best.
Boys! Fantastic info there. Thanks a ton!
I’ve seen this car on I25 a few times. I tried to get him to run but it was pretty traffic heavy. Neat car though
YESSIR! I LOVE IT WHEN YOU SPREAD THE KNOWLEDGE BROTHER! KEEP IT UP!! YOU AND THE GUYS ARE AWESOME AND YOU/WE ALL KNOW YOU ARE!
great job on this B20B , the crackssleeves scare me personally on its engines.
dude, you have a drain plug on the fuel tank :)
You should build 2 fold up cots on the front part of the trailer
PFI Knowledge dumping again. So awesome!
Now the remaining thing for me to have is a FuelTech myself...and the O2 unit. Can you use weird crank patterns with it? I'm going to do an EFI conversion on my FZR400 using a modified 2006-onwards R6 throttle body assembly (YCC-T E throttle) and the pulley has this 3 point 1 bar pattern on it and a magnetic pickup, all Hitachi. Before I would put a fine toothed trigger wheel and Hall effect sensor in there, there's the cam sensor to try and find a spot on the cylinder head...oh man...
Stepping up the trailer game! Staying on the track, sleeping in and waking up right on the spot? That would be sick. Just thinking about it...the full racetrack experience!
you can do any pattern 💪🏽
@@PFIBrent hell yeah!
That trailer is badass
Nice trailer!!!
Forget wood use a sheet of pvc for the generator door.
If you take the cover off a relay you can just put it in place of the fuel relay and squeeze it to activate the pump underhood, junkyard trick
Good one
Does the factory dash still work because you used a boomslang harness, or could you use a FuelTech harness and STILL have your factory dash work? I want to fueltech my S2000 but don't want to give up the factory dash, hence the question.
it can all work no problem 🤩
Why would you want to choose semi sequential? Wouldn't that cause the injector to fire on the exhaust stroke as well as the intake stroke?
Is it still a B20? Or B18? Why do rods and pistons if the cylinder walls are the main weakness?
Wish you guys would come to HDay😢
Great incredibly useful information! I could see that being insanely complicated if you aren't familiar with tuning software! 😵
Like to see this same video of FuelTech setup for K series.
i showed the good in the freedom civic series 🤩
You're goated for this brent!
man i wish you guys can tune my eg ihave a full ft450 with custom harnnes ..... i got it runing but i need a tune
Frigging Awesome ❤
Thanks you for that knowledge
They’re back 💪🏽💪🏽💪🏽🔥🔥🔥🐐🐐
Any update on the bully getting its new front end?
I want 2 see it at the track
Any tips on how to preserve a boosted B20?
Hey Brett are you guys doing Sick Summer. Cause I’m from IL and would love to see the cars run
Do you have to do the bk9 plugs on OEM dizzy? Or just the cop stuff. This video is so awesome 🙌🏻
Awesome keep pushing forward 💪
Hey guys love the channel.
Have you setup a ft600 with a htg gcu transmission comp?
Nice trailer Jamie!
What about ShoNuff?
Coming soon!
Do you still go to Pueblo Motorsport park?
he said new little Trailer haha thats kinda big bro..... PFI!!!!!!!
My girlfriend has a CR-V. I'm going to show her this and ask her she wants to make it a hot rod.👍
Some day i hope to get you to come to my house and help me work on my truck
Do you have a k24 start up for the ft550 video ??
I was having withdrawals miss the crew
Level up Jaime!
Hell Yeah Brother 🇺🇸🦅
First off I want to say hell yeah bro love your videos and keep up the good work man. Anyways, I have a serious question. I was wondering what Honda engine should I buy for a starter car? I wanna build it very slowly because of funds so what’s a good engine to start with
d16z6 can be a ton of fun! look into the Vitara builds. 🤩
Nice n healthy pump gas driver😊
😅picked up 70 ponies on e85, 😂my bug don't even make 70 hp, yet😊 my heads arrived today🎉
Wish like hell i was close to you guys just for the knowledge.. lol
Is that Rudnik’s ?
Its gotta be
do they make them for k swap as well
Let's go pfi crew 👍
Any tips on setting up fueltech settings for ls? Dont know how to configure some of the sensors, running a ft600 with a ls550 harness
they have all the setting for both style crank triggers . they’re pretty simple that way and the injector set up the same
so the crank and cam triggers settings dont have to be changed? Im specifically struggling to find if those sensors are rising or falling edge and what type of sensor it is. First time working on something like this so want to verify everything is correct before attempting my first start,
My question is what is needed with fuel tech to get rid of the distributor?
Once a crank sensor is installed on the engine, that would be the signal needed for the ecu to calculate timing. Only then can the distributor be eliminated.
Let's goooooo! 💥💥💥💥💥
missing that half hour of power weekly bro 😉shonuff season soon I guess
Can this be done on a autobox V?
how much on average does your awd dyno tune cost @pfispeed
Wooow very nice
crv w the sun roof is rare
More vids like this please🎉🎉🎉
Isn't that rudniks? 😮
This way beyond what my brain can comprehend. Lol 😊
been missed
If you dont have a timing light is it possible to tune still?
not really, tuning is timing everything at the right time . you have to know when your making it pop .
FT 4tW
Been a minute lads miss the content
Let’s go bro 😎
😂😂 y’all said doody.
Knock detection??? You guys never have cans on