Great video, amazing that you're offering free cable exchanges. One clarification is in the gSender Firmware tool the "SLB" profile isn't used anymore since once you're connected with "grblHAL" as the firmware on the connection dropdown, you can just have any "LongMill" or "AltMill" Profile selected in the Firmware tool profile dropdown and it'll show you all the right settings. Also when you set the remaining settings remember to turn the SLB off and back on again to make sure they take effect. Pro tip: in gSender's console, if you press the 'Up' arrow on your keyboard, it'll bring up past commands that you've sent so you don't need to retype them :D
Thank you for the additional details. I've pinned your comment to the top so others will find it and I've updated the description to make note of these differences since it's impossible for me to re-edit/replace this video.
Thank you so much! Video was dead on got my cable already swapped out and followed the process and it is working perfectly. Cable is on the way back to you! Amazing service, support, and innovative products for sure.
This is great, Daniel, I definitely want this cable!! 😃 I absolutely love how you're always working to improve things and make owning your spindle better for us users. Keep up the great work. 👍👍
Got my cable in and replaced this weekend. Works great! Previously my RPM was 10%+/- what gSender showed and now it's at most 10RPM +/- Nice job getting it worked out. I'm fine connecting inside the controller with the phoenix connector but if you wanted to go with the crimped on rj11?
Great video. Will be purchasing the spindle kit shortly. Have a question... You mention in the video that SLB Firmware $16=Enabled, however, your CNC Controller Guide for SLB dated 11/4/2024 has $16=All Off. Can you please clarify if the Controller Guide Settings should be followed over the video? Thanks again!
Hello Cablsurfin, you are correct... the video does mention $16 enabled, we have since learned $16=all-off is the better choice. Our ability to edit the videos is extremely limited once it's published. I will update the description so it's more clear to follow our KB: support.pwncnc.com/kb/article/468-super-long-board/ Thank you for bringing up this mistake so we can get it corrected.
Great video, amazing that you're offering free cable exchanges. One clarification is in the gSender Firmware tool the "SLB" profile isn't used anymore since once you're connected with "grblHAL" as the firmware on the connection dropdown, you can just have any "LongMill" or "AltMill" Profile selected in the Firmware tool profile dropdown and it'll show you all the right settings. Also when you set the remaining settings remember to turn the SLB off and back on again to make sure they take effect.
Pro tip: in gSender's console, if you press the 'Up' arrow on your keyboard, it'll bring up past commands that you've sent so you don't need to retype them :D
Thank you for the additional details. I've pinned your comment to the top so others will find it and I've updated the description to make note of these differences since it's impossible for me to re-edit/replace this video.
Thank you so much! Video was dead on got my cable already swapped out and followed the process and it is working perfectly. Cable is on the way back to you! Amazing service, support, and innovative products for sure.
Right on! Can’t wait for a new cable.
This is great, Daniel, I definitely want this cable!! 😃
I absolutely love how you're always working to improve things and make owning your spindle better for us users.
Keep up the great work. 👍👍
Got my cable in and replaced this weekend. Works great! Previously my RPM was 10%+/- what gSender showed and now it's at most 10RPM +/- Nice job getting it worked out. I'm fine connecting inside the controller with the phoenix connector but if you wanted to go with the crimped on rj11?
The support KB mentions $340 (should be 0 or 5 depending on the version of the SLB), $374 = 192000, $375 = 50, $392 = 6, and $476 = 1
Great video. Will be purchasing the spindle kit shortly. Have a question... You mention in the video that SLB Firmware $16=Enabled, however, your CNC Controller Guide for SLB dated 11/4/2024 has $16=All Off. Can you please clarify if the Controller Guide Settings should be followed over the video? Thanks again!
Hello Cablsurfin, you are correct... the video does mention $16 enabled, we have since learned $16=all-off is the better choice. Our ability to edit the videos is extremely limited once it's published. I will update the description so it's more clear to follow our KB: support.pwncnc.com/kb/article/468-super-long-board/
Thank you for bringing up this mistake so we can get it corrected.
I have a long Mill and now a SLB, I also have one of your 2.2k water-cooled kits. How do I get a cable?
@@jastoddart reach out to support@pwncnc.com