Man you are amazing. Some people do work outs some people go for a hike ride but oh no you tear your car down. This video is worthy of a Mopar factory training manual. I have a 2013 challenger and your welcome to come over and film a how to so I can get that one last bug out from behind my grill lol!!
Hahaha I love it! Thanks so much for the kind words I really appreciate that! Hahaha well we cant leave a dead bug behind the grill so I better get on my way over to help you out lol!!!
Thank you very much I really appreciate all the kind words! I am very happy that this video was very helpful for you! You're welcome and thank you for watching and commenting!
Super helpful and detailed! Like you said at the beginning of your video. I looked at another video but I couldn't see exactly what they were doing or tools they were using. I'm just about to do this task to replace a headlight assembly so thanks again for the video!
Glad it was helpful and you enjoyed the video! I hope it goes smoothly for you and it is not that bad or hard of a job. You are very welcome and thanks for watching and commenting I love it when my videos help people out! 🐝
Just wanted to say thank you. I was searching for a bumper removal for a 2016 Challenger so I could install my billet grill. You made your video so simple I am a woman and I did it myself.
Are you freaking kidding me man. I've been searching for weeks proper videos to show me how to remove the front fascia. And low and behold i put in some unrelated search term, and this video pops up. So weird. Thanks though man! Pulling this bad boy off this weekend with a couple buds. Again, you are amazing dude.
That is so weird! You wouldn't happen to know how you worded your search? I am happy this video popped up for you and hopefully it will help you out! Sounds like you have a good weekend coming up! Hahaha thanks for all the kind words an support!
Bro thanks a lot for doing this! This helps out the Mopar community a lot! The instructions were detailed and gives us total confidence to do this ourself!! Much appreciated this Video! 💪🏼👍😎
Thanks for all the kind words brother! I really hope that it helps anyone out needing to do this and saves them some money! It's ALL about our MOPAR community! Thanks for the support, watching and commenting brother! 🐝
You are awesome. Thank you so much. I have to replace my whole bottom grille and needed to know how to remove my bumper. Without breaking something, or scratching up my pride and joy. You was very calm, and showed everything you was doing. If i need to remove anything else, ill be sure to find you. And see if you have a video for it. Again thank you for the VERY DETAILED video. It's much appreciated
You're very welcome! Thanks for the kind words and I am glad to hear that you found this video very helpful! If you have any questions let me know and I will try to help. Thanks again!
best how to video ever. the bolt that you had to use extensions drove me crazy because i didnt have a deep socket, your vid gave me a huge sigh of relief
Thanks buddy and I am glad you enjoyed the video! That's awesome to hear that the video was able to help you out and its always a good feeling when my video is helpful for people. Thanks for watching and commenting bud!
Just got my new scat pack splitter so this will probably be the best way to take off old splitter and put on new one.You did it because you're a gentleman.
Very awesome man! Yes I think this would be your best bet for taking off the splitter and putting the new one on. Hahaha thank you very much and thanks for watching until the end and guessing!
I regret not filming this when I did my wrap ...until now, Thank you! This is a awesome! Clear and to the point video on how to remove the front Bumper, better than I would have done it ;) I was going to do one, but now I'm just going to point to yours.
Work Play Drive WOW thanks so much for all the kind words that means so much to me! Man I don't know if I would say that my video would be on the same level as yours but seeing you say that really means a lot to me and I will take your word for it 🙏 Thanks for your support!
Thanks a bunch. This video saved me. Went to a service station for gas, as all challenger owners do, a lot, and will top any fluids as needed. I was topping the engine coolant tank, placing the cap on the air box. HUGE mistake. While pouring the coolant, the sleeve on my jacket touched the cap, and it slid off and down into the abyss. It vanished. Searched with flash light on m,y key chain, couldn't find it. To make things worse, I could not reach in anywhere far enough to even feel for it. SHIT! Cant drive 12 miles home with the cap off. Had no tools with me. Your video showed me the pop out covers on top. I popped the driver side up n out, shined my light, and there it was, the cap. got it out and can now drive home. Thanks again.
That is so awesome to hear that this video was so helpful for you and got you out of a tight spot! I love it when my videos are helpful to people and especially in more ways than one like in your case! I am so glad that you were able to remove that panel to get your coolant tank cap so you could drive home because like you said there is no way you could of driven 12 miles with out it! I bet that was a moment of disbelief and upsetting when you heard it fall down in there! You're very welcome and once again glad the video helped you out! Thanks for watching and commenting buddy!
I do have an oil change video on the 392 and maybe that would be what you are looking for. If that video is not what you are looking for I can make one. Thanks for the recommendation on content you would like to see!
Man, I wish you made this video a few months ago. Would have saved me hundreds of dollars!! Don't feel bad about not having anything to do that you decided to take ur car apart. You now have the only FULL front bumper removal video on TH-cam or even the internet. You will get lot's of views off of it. As I was the only one with the Tail Light Insert install video and I have almost 1000 views on it with only 150 subscribers. It would definitely benefit everyone if you did videos on removing certain parts of the bumper as well. I will refer to this video one day. So +1 view from me already!!
eunit08 Thanks bro! Sorry I didn't have this wild idea a while back to be able to save you some cash! Yeah there is not to meany videos on the front bumper out there and I would like to see this one take off but only time will tell! Bro that's awesome on your video and that is the greatest feeling seeing one of your videos hitting 1K! Awesome I hope this video will help you out in the future!
MeanBee392 thanks and it will help me out for sure. I had a little hand on tue removal when i was at mod fx so I know a teeny bit about it before ur video
So the plastic rivets that you push in the center on the wheel wells, I’m guessing it’s just best to replace those? Any way to reuse those or are they pretty much trash after you remove them?
DITTY44 Once you push the center out they are trash. You can buy 1/4 inch plastic rivets to replace them or use 1/4 inch push pins which are a lot nicer because they are reusable. That's a great question and I should of went over that. Thanks for watching and commenting!
Great video as always my friend, it will be THE Video to watch. Thank you for your time to show us the right way to do the job. I think the car looks like a modern day Christine without the bumper, lol. Have a great week my friend.
Rick Archer Thanks so much buddy! Thank you for always supporting the channel! You are welcome and I just hope this video will get to people who it can help out! Hahaha now that you say that I think it does look like a modern day Christine! That has me a bit worried now hahaha! Thanks once again for watching and commenting! I will have a great week and you do the same buddy and take care!
Amazing video i love how u broke it down now ill be more confident on removing my bumper myself i tried before but failed thanks so much this breaks it down for alot of us!
Thank you very much! I am glad that this video will help you I really wanted to make this video and do a step by step to help people out and sounds like I did. Thank you for all the kind words and watching and commenting!
Thank you so much i just took my front clip off and took my headlights out and sending them to oracle to have the new RGB DRL boards installed. Your video was so much help. Thank you again
That is SO awesome to hear and I am so glad that my video was so helpful for you and you were able to remove you bumper and headlights your self! Thanks for watching and commenting! 🐝
Man great video, I was hesitant at first but after watching this I am going to give it a shot. I have a 2015 Cat that needs a Intercooler pump replaced. Its under the driver side air box, I already have the wheels off and the inner fender wells removed so it may be a little easier to reach the fender bolts. Thanks Again.
Very impressive video, I'm doing mine tomorrow. I'm installing a new grille to my 2017 Challenger GT, thank you for your concise and informative instructional video.
Shawn Williams That is awesome to hear brother! I am glad this video was helpful and informative for you! Sorry I didn't comment back for so long but for some reason it never popped up your comment until tonight for me.
Andrew Archuleta Thank you I really appreciate it! I am really glad this video was able to help you out! Hopefully your car is ok though since you had to replace the fender!
Thank you for this! I'm going to have to remove this from my 2016, and your video takes my worries away. I'll just schedule two or three hours on a Saturday to do it.
You are very welcome! Hopefully it all goes well and I am glad to hear that my video is helpful and informative for you! Thanks for your time watching and commenting!
Great video👍i have a 2012 im going to replace headlights with air intake headlights for my intake this video is perfect(plus u took out less bolts than other videos I've seen)👍
Thanks 👍! I am glad you enjoyed it and hopefully it will come in very helpful for you when you are removing yours. Haha that's a good thing and just trying to make it as easy as possible for everyone. if you have any questions let me know and I will try to help you out. Thanks for watching and commenting!
Very well done. Great patience taking the time to go thru the steps. Excellent video quality. Definitely a pucker factor without some kinda guidance from you. Now we can all do this without the oh sh-t factor! Thanx again. Subbed
Thank you very much for all the kind words! I am glad you enjoyed this video and found it helpful and thank you so much for subscribing! I try to do the best as possible how to videos to help people feel comfortable doing thing like this their self's. Thanks again for your support!
You are very welcome! I am glad this video is what you needed and was looking for! That's awesome that it helped you out and is always a great feeling when I can make content to help people out! Thanks for watching and commenting!
Nice! Thx for this video. I was looking at my new challenger and wondering why my 2014 model looked a lot nicer and it was the new grille. Can't wait to replace it.
You are welcome and I am glad to hear that you enjoyed the video and it is helpful to you! Let me know how replacing it goes if you don't mind. Thanks for watching and commenting buddy!
Great and detailed video. I have unfortunately bumped into someone ahead of me at 0.5 mph and the inner plastic has cracked by the left headlight, unglued from bumper and pushed out on the very left lateral side. Thus, I need to get the bumper off in order to push it all back together and try to glue it back with some sort of silicone glue that OEM uses. What do you replace the broken plastic rivets with when placing the bumper back?
Vytautas Vaicys Dang sorry to hear about your bad luck! I will be doing an bumper install video this weekend hopefully! But for the plastic rivets just replace them with 1/4 inch push rivets. You can get them at any auto parts store, you can get (Dorman, part number 961-075D) or (Help, part number 961-050) hopefully this will help you out! If you have any more questions let me know!
Wow I have to thank you 🙏 my hat is off to you for doing that to your car so we can learn. My buddies scat pack challenger chin splitter was almost yanked off by a parking slab so we will be removing the facia. Can’t wait to see you install it back on. I will subscribe. Thanks again.
Thanks and glad you enjoyed the video and it is helpful to you! That's a bummer to hear but can be easily fixed. The install video is in my videos also hopefully they will be very helpful for you guys. Thanks you for your kind words and subscribing to the channel, watching and commenting!
funally a good video in how to pull the bumper off! i broke a headlight after hitting a bird and i been wondering how to remouve the bumper to change my headlight housing! thank you! great video! 👍👍👍
Thanks! Glad this video is helpful and informative for you. Dang that sucks that you hit a bird and it broke your headlight. How big was the bird? Hopefully this video will make replacing your headlight much easier. Thanks for watching and commenting!
Thanks a Ton. I bought a totaled 2016 Shaker car that I am reconstructing. The front was smashed and most pieces missing. It's like a jigsaw puzzle with pieces missing. Now I see where all the parts go to put it back together.
You're welcome! Glad you found this video helpful and informative. Haha I bet it does feel like a jigsaw puzzle. Hopefully your project is going good and this video is helping out along the way. Thanks for your support!
I'm planning to do the same soon - same thing with most pieces missing on the one I want. This video is great help seeing all the inners behind the front bumper cover.
Thanks buddy that means a lot! I am really glad that this video is helpful to you! That's why I love making videos is to help other people out! Thanks for watching and commenting.
I love it, most practical easy to fallow video tutorial I have seen on that definitly in my favorites, I am constantly adding mods to my car and rwmoving the front bumper is essntial for mi thanks a lot for this video bro
Thank you I really appreciate all the kind words! I like to try to make the best video and an easy step by step to follow for everyone. I am glad this video will help you! You're welcome and thanks for watching and commenting!
great video, I have a question about the lower air dam.....is there a reinforcement in it? Is it secured with the same push pins as the ones you pulled above the headlight covers? Thanks in advance for the help.
Thank you! Are you talking about the lower lip/splitter? If so it is held on by push pins, plastic rivets, and plastic tabs that are pushed in. Hopefully this helps! Let me know if it does or if you have any more questions I would be glad to answer/ help you out!
Wow,great video very well done.......I do have a question for you.....I have a 2020 Challenger SXT that the factory fog lamps were not ordered at the time, I plan to go with a aftermarket fog lamp assembly that will have brackets that come with the kit.......My question here, is there a place in behind the bumper cover that the brackets can be mounted to hold the fog lamps in place ........The front cover has the precut outs for the fog lamps after the black caps are removed.......Also the kit is specifically made for 2015 to 2020 Dodge Challengers........Thanks.
Thanks and glad to hear that you enjoyed the video! There will be places to mount your fog lights to behind the cut outs but I would check the instructions because they might have better info on a solid mounting point for them. Hopefully that helps.
I got a question to ask, is it possible to remove just the silver grille that is attached to the front bumper and attach the 2007-2014 silver grille? Or is the only way to get that look is by replacing the entire front bumper? I love the look of the 2007-2014 front bumper silver grille, but everything else I prefer the 2015+
You can remove it from the bumper but the one that you like is going to have different size to it (height for sure and headlight openings) but I am sure you could get creative and make it work. If you do something like this keep me posted because I would love to see. Thanks for watching and commenting!
damn dude I just don't have it in me to do this - I would 100% lose or mess up screw etc. Nice job.... I'm sure this will come in handy for people looking to do some custom lights/intakes etc.
R/T Life Hahaha that's funny brother! I hope it does come in handy for someone! That is very true and even if someone is going to wrap the car or do any kind of grill or badge work it might be a good video.
I need to change my wife's front bumper due to damage. Do you have any tips or advice on how to remove and re-install the wiring harness and fog lights from the old bumper into the new one? The new front bumper will not come equipped with those. THX in advance for any info & for the awesome and very informative video?
I am glad you found this video helpful and informative and I hope it helps you out when you start replacing your wife's front bumper. The harness will be attached by clips that you can just swap right over. Hopefully that helps and if you have any questions let me know and I will try to help you out.
@@MeanBee392 After further investigation, it seems that my wife's Challenger only needs the grill reinforcement. I will still need to remove the bumper (obviously) but my question is, did you notice if this reinforcement is hard to remove? I realize this wasn't the point of your job , but am just curious. This video will still be very helpful! Thanks.
Thanks! It has clips and plastic rivets that you have to drill or cut off. Sound harder than it really is but it's not that bad of a job. Hopefully this helps and thanks for watching and commenting!
Ronald M You can get them at any auto parts store just make sure they are a 1/4 inch push pin. It’s easy to do but if it’s your first time it can be a bit intimidating but don’t let it scare you just take your time and it will go smoothly. I also have an install video and that might help you also. Thanks for watching and commenting and thanks for the compliment!
Sorry for the late reply but I do have a video on my channel doing halo rings on them and I show hoe to disassemble and reassemble the head lights. Hopefully that will help.
@MeanBee392 Just wondering, have you had to replace the radiator for the TSB these cars had for 2015 model with radiator seepage? It says it's necessary to remove the fascia like your video shows to replace the radiator.
I have not had to replace the radiator but removing the front bumper would be a must to change out the radiator. Do you have one that is leaking? If you do hopefully this video is helpful and informative for you. Thanks for watching and commenting!
Very good video ! Ich have an issue with a creaking noise, sometimes hearing it when i am driving in a parking lot. When i am pushing along the front bumper, there is also a craking. Don't know, if it comes from the bumper, what I am hearing inside. Maybe i will put the bumper off, put some anticreakingstuff underneath.... What do you mean ? 2015er R/T Greetings
I would pull it off and check it out personally. But if it is something that doesn't bother you I don't think I would worry about taking it off but on a plus side it is very easy to take off and put back on.
Okay, thanks for your suggestion. And yes, it's annoying for me....when therer are noises in a car :-) I found so many, that will causes creaking noises...the sleeves over the ST/KW-Suspension....the brakeline mounted in the front....an the insulution of the front hood. But this creaking at very low speed didn't go away :-)
You're welcome! Hahaha sounds like you are the same way that I am and small noises just drive me crazy! If you end up pulling the bumper and find something let me know I would be curious!
Okay, today I removed the front Fascia. I also disassembled the crash-plastic-stuff . But, everything in the friont area is creaking......most of the things is fastend with this cheap plastik-clips....... I fixed everything by using "Butyl"....put it betwen the gaps. Also the frontgrills, the only way to getting them quiet was using butyl. Hopefully, isue is fix :-)
Yeah they do have some cheap plastic clips! I know what butyl is and I think that should work great! Thanks for letting me know and hopefully it is no longer making any annoying noises!
I do list them in the video when I am using them (I am just saying this because it has been a while since I did this) You will need a flat tip screwdriver, 3/8 ratchet, 3/8 extension, 3/8 universal joint, 10mm socket and possibly an 8mm socket. Hopefully this is helpful.
Nice bud 👍 thanks for the video I'm upgrading my Sxt Plus front airdam and still trying to figure out the best way to take on this challenge you took one for the team Mopar or no car!!🤘 Greatly appreciated 👊
Thanks and hopefully this video will offer some info and help for you to get your front airdam on. Thanks for watching and commenting I really appreciate it! MOPAR OR NO CAR!
I want to do a bumper conversion to get rid of the fog lights, I've removed my front bumper before for maintenance repair, is the front bumper hellcat/demon/widebody the same as the Scat Pack to remove/install? Couldn't I just buy a factory hellcat bumper and install it? (including all clips/splitter)
Yes they are the same as long as it is a 2015 or newer. Lots of people with Scat Packs will do a Hellcat bumper conversion and it is very simple. Hopefully that's helpful and thanks for watching and commenting! 🐝
Man, I just did this and I would not do it just for fun. Why would somebody need to do it? Change the grill? I don’t think one would need to for a hellcat lower air box. Well I found out putting back together was simpler. Your a wild man. 👍🏻
LOL well you never know what to expect on this channel bro! No I don't think I would need to do it for the lower air box but man it would make it easy as heck lol! Thanks for watching brother!
Sorry for the late reply but yes it would make it a lot easier to remove the bumper to change out the front spoiler. If this is a project that you end up doing hopefully this video will be helpful to you. Thanks for watching and commenting buddy and good luck. If you have any questions please feel free to ask.
MeanBee392 no worries! This video is very well done and detail to work is amazing! I also saw your video how to install the bumper back on. I have both saved and ready to watch again when the time is needed!
Jaime Olvera Thanks! That's awesome to hear and that's what I like, to have a video as informative as possible to help people out so they can feel confident in doing it themselves. Thanks for watching and commenting!
The first time I did it it took about 45 minutes to an hour but I can do it now in 15 to 20 minutes and it is very easy. Hopefully this is helpful and thanks for watching and commenting !
Do you know if can be installed fog lights on any challenger? ( cuz I have a SXT 2015, and it hasn't, instead it has the black stuff on it) please answer if you know it.
Yes you can add factory fog lights by getting rid of your blanks "the black plastic pieces" but it can be a bit pricey. I would look at Steve White Motors on line to find them. Hopefully that helps.
@@MeanBee392 Thanks for the reply. I ask because a shop wants to charge me for 5 hours of labor to replace a front bumper on a 2018. Really glad I watched your video beforehand. Subscribed 😁
You are welcome! Wow that's a lot of labor! Hopefully I was able to help you save some money! Thanks for subscribing and supporting the channel! Welcome to the MeanBee392 family! 🐝
That was tough to show but that is the plug in on the passenger side with the red safety clip. It is a bit of a reach but it is doable. Thanks and glad you enjoyed the video! Thanks for watching and commenting!
Thank you bro for the amazing video, my only question i can't find this deep flexible socket i tried every where can't find it if u just can help me with link or a shop would be great Thank u for the great efforts
You are very welcome! Thanks for the support on the channel! Here is a link for one like I am using in the video www.amazon.com/Craftsman-Universal-Joint-Drive/dp/B00GWBLLQ8/ref=sr_1_3?keywords=3%2F8+universal+joint&qid=1578363414&sr=8-3 Hopefully this is helpful and the video also! Thanks for watching and commenting!
That's going to look good! That's awesome to hear that my video was helpful to you it means a lot! Was your 14 much different than mine? Thanks for watching and commenting!
I bet it looks really sharp with the hood and wheels and now the new front splitter! Thanks for letting me know and hopefully it all went smooth for you!
So wait...I've seen some videos where some people have stated that you have to get underneath it and pull out 7 pins as well before you can remove the front bumper. Do you not have to do that? I have a 2016 Challenger.
Blacktop_Shady The only thing you have to pull out on the bottom is the screws that I showed in the video. Everything that I removed in this video is all that needs to be taken off in order to remove your front bumper. Hopefully this is helpful and thanks for watching and commenting!
Blacktop_Shady Absolutely brother! Hopefully this video will be very helpful to you! Like I said just follow it step by step and you won’t have any problems. If you have any questions let me know.
Ik its old video and I shouldn't be commenting cause you might not respond, but if you happen to see this, where did you get your tools, home depot or online? I'm wanting to remove the chrome rectangle trims off from the grill soon.
It is a older video but I always try my best to respond to all of my comments because I appreciate my viewers and especially when they take the time to watch and comment in my videos. I am a mechanic by trade and a lot of my tools come off of tool trucks Snap-On, Mac, Matco, and so on but you do not need expensive tools to do this job and you would be able to fine everything at a Home Depot or Lowes. Hopefully this is helpful and you will be able to use this video for a reference. Thanks for watching and commenting!
MeanBee392 Ah ok and thanks I appreciate your videos you explain very well on where and how to remove/reinsert certain things, very informational keep up the good work! 😃👍
You're very welcome buddy! I am glad to hear that you enjoy my videos and find them helpful and informative. Thanks for your support buddy and I will keep it up!
I got them from the auto parts store. You need a 1/4 plastic push rivet to replace them. Hopefully this is helpful and thanks for watching and commenting!
@@MeanBee392 you can get plastic rivets from parts stores (car quest / napa) and rivet them back like factory. I am tearing a front bumper that has both. the rivets and the push clips. Both work fine, but the rivets are factory style. You can use a regular rivet gun, but watch harbor freight for sales, they have an air rivet gun that works awesome For those.
No you would not need to remove the bumper if it is just the bulb and not the ballast. Just remove that top plastic cover that just snaps in and that will give you full access to it. Hopefully that is helpful and thanks for watching and commenting!
MeanBee392 i tried reaching for it but theres like no room for my hand so the bulb wont come out, is there like a clip that holds it in place or something?
I don't know 100% but I am sure that if it is not the same it will be very close. Hopefully this video will be helpful for you! Let me know how your install goes. Thanks for watching and commenting!
Man you are amazing. Some people do work outs some people go for a hike ride but oh no you tear your car down.
This video is worthy of a Mopar factory training manual.
I have a 2013 challenger and your welcome to come over and film a how to so I can get that one last bug out from behind my grill lol!!
Hahaha I love it! Thanks so much for the kind words I really appreciate that! Hahaha well we cant leave a dead bug behind the grill so I better get on my way over to help you out lol!!!
well done
Many instructional videos don't really show you how. They show you that they know how. You really nailed the problem. Thanks for the info!
Thank you! Glad to hear that you enjoyed the video and hopefully it was helpful and informative for you. Thanks for watching and commenting!
This is the best dodge challenger bumper removal video. Very helpful. Thank you.
Thank you very much I really appreciate all the kind words! I am very happy that this video was very helpful for you! You're welcome and thank you for watching and commenting!
Super helpful and detailed! Like you said at the beginning of your video. I looked at another video but I couldn't see exactly what they were doing or tools they were using. I'm just about to do this task to replace a headlight assembly so thanks again for the video!
Glad it was helpful and you enjoyed the video! I hope it goes smoothly for you and it is not that bad or hard of a job. You are very welcome and thanks for watching and commenting I love it when my videos help people out! 🐝
Just wanted to say thank you. I was searching for a bumper removal for a 2016 Challenger so I could install my billet grill. You made your video so simple I am a woman and I did it myself.
That is so awesome and rewarding to hear! I am so glad that this video helped you out! Thanks for letting me know! 🐝
Are you freaking kidding me man. I've been searching for weeks proper videos to show me how to remove the front fascia. And low and behold i put in some unrelated search term, and this video pops up. So weird. Thanks though man! Pulling this bad boy off this weekend with a couple buds. Again, you are amazing dude.
That is so weird! You wouldn't happen to know how you worded your search? I am happy this video popped up for you and hopefully it will help you out! Sounds like you have a good weekend coming up! Hahaha thanks for all the kind words an support!
No problem man. I literally put in "challenger grill replace" (without quotes) and your video came up in the list
@@Miguel_Molina Ok I was just wondering. Glad it popped up for you!
Bro thanks a lot for doing this! This helps out the Mopar community a lot! The instructions were detailed and gives us total confidence to do this ourself!! Much appreciated this Video! 💪🏼👍😎
Thanks for all the kind words brother! I really hope that it helps anyone out needing to do this and saves them some money! It's ALL about our MOPAR community! Thanks for the support, watching and commenting brother! 🐝
Thanks for the great and detailed removal of the front bumper. Easy to follow and very comprehensive! Excellent job!
You're very welcome and glad to hear that it was helpful and informative for you!
Great removal video, very helpful, just hit a deer and need to replace the front bumper and LS headlight assembly. Timing couldn’t be any better!
Thanks! Hopefully my video will be able to help you out getting your front end fixed up. Sorry to hear about your bad luck with a deer though.
So helpful. Step by step with clarity and common sense. You are wonderful Sir & thank you
Thank you! Glad you found the video helpful and informative. Thanks for watching and commenting.
You are awesome. Thank you so much. I have to replace my whole bottom grille and needed to know how to remove my bumper. Without breaking something, or scratching up my pride and joy.
You was very calm, and showed everything you was doing. If i need to remove anything else, ill be sure to find you. And see if you have a video for it. Again thank you for the VERY DETAILED video. It's much appreciated
You're very welcome! Thanks for the kind words and I am glad to hear that you found this video very helpful! If you have any questions let me know and I will try to help. Thanks again!
best how to video ever. the bolt that you had to use extensions drove me crazy because i didnt have a deep socket, your vid gave me a huge sigh of relief
Thanks buddy and I am glad you enjoyed the video! That's awesome to hear that the video was able to help you out and its always a good feeling when my video is helpful for people. Thanks for watching and commenting bud!
Just got my new scat pack splitter so this will probably be the best way to take off old splitter and put on new one.You did it because you're a gentleman.
Very awesome man! Yes I think this would be your best bet for taking off the splitter and putting the new one on. Hahaha thank you very much and thanks for watching until the end and guessing!
how did it go man? i am installing my splitter this weekend. Just stumbled across this video. lucky me.
Best front bumper removal video I have seen. Thank you.
Thanks! Glad you found the video informative. Thanks for watching and commenting!
I regret not filming this when I did my wrap ...until now, Thank you! This is a awesome! Clear and to the point video on how to remove the front Bumper, better than I would have done it ;) I was going to do one, but now I'm just going to point to yours.
Work Play Drive WOW thanks so much for all the kind words that means so much to me! Man I don't know if I would say that my video would be on the same level as yours but seeing you say that really means a lot to me and I will take your word for it 🙏 Thanks for your support!
Thanks a bunch. This video saved me. Went to a service station for gas, as all challenger owners do, a lot, and will top any fluids as needed. I was topping the engine coolant tank, placing the cap on the air box. HUGE mistake. While pouring the coolant, the sleeve on my jacket touched the cap, and it slid off and down into the abyss. It vanished. Searched with flash light on m,y key chain, couldn't find it. To make things worse, I could not reach in anywhere far enough to even feel for it. SHIT! Cant drive 12 miles home with the cap off. Had no tools with me.
Your video showed me the pop out covers on top. I popped the driver side up n out, shined my light, and there it was, the cap. got it out and can now drive home. Thanks again.
That is so awesome to hear that this video was so helpful for you and got you out of a tight spot! I love it when my videos are helpful to people and especially in more ways than one like in your case! I am so glad that you were able to remove that panel to get your coolant tank cap so you could drive home because like you said there is no way you could of driven 12 miles with out it! I bet that was a moment of disbelief and upsetting when you heard it fall down in there! You're very welcome and once again glad the video helped you out! Thanks for watching and commenting buddy!
@@MeanBee392 Can you do a video on oil checking, safe levels, safe top off, ???
I do have an oil change video on the 392 and maybe that would be what you are looking for. If that video is not what you are looking for I can make one. Thanks for the recommendation on content you would like to see!
Man, I wish you made this video a few months ago. Would have saved me hundreds of dollars!! Don't feel bad about not having anything to do that you decided to take ur car apart. You now have the only FULL front bumper removal video on TH-cam or even the internet. You will get lot's of views off of it. As I was the only one with the Tail Light Insert install video and I have almost 1000 views on it with only 150 subscribers. It would definitely benefit everyone if you did videos on removing certain parts of the bumper as well. I will refer to this video one day. So +1 view from me already!!
eunit08 Thanks bro! Sorry I didn't have this wild idea a while back to be able to save you some cash! Yeah there is not to meany videos on the front bumper out there and I would like to see this one take off but only time will tell! Bro that's awesome on your video and that is the greatest feeling seeing one of your videos hitting 1K! Awesome I hope this video will help you out in the future!
MeanBee392 thanks and it will help me out for sure. I had a little hand on tue removal when i was at mod fx so I know a teeny bit about it before ur video
You are welcome bro! Awesome they are great people and that's good that you knew a bit about it before!
So the plastic rivets that you push in the center on the wheel wells, I’m guessing it’s just best to replace those? Any way to reuse those or are they pretty much trash after you remove them?
DITTY44 Once you push the center out they are trash. You can buy 1/4 inch plastic rivets to replace them or use 1/4 inch push pins which are a lot nicer because they are reusable. That's a great question and I should of went over that. Thanks for watching and commenting!
I really appreciate you for taking time to film this mopar fam
You’re very welcome and hopefully you found it helpful fam.
this video is incredibly helpful. especially the shot behind the fender well where those posts were.
That’s awesome to hear and I am glad that this video was very helpful for you! Thanks for watching and commenting!
Great video as always my friend, it will be THE Video to watch. Thank you for your time to show us the right way to do the job. I think the car looks like a modern day Christine without the bumper, lol. Have a great week my friend.
Rick Archer Thanks so much buddy! Thank you for always supporting the channel! You are welcome and I just hope this video will get to people who it can help out! Hahaha now that you say that I think it does look like a modern day Christine! That has me a bit worried now hahaha! Thanks once again for watching and commenting! I will have a great week and you do the same buddy and take care!
You take care also, and don’t you worry about a thing, if she gets hurt, she can always repair herself, lol.
Amazing video i love how u broke it down now ill be more confident on removing my bumper myself i tried before but failed thanks so much this breaks it down for alot of us!
Thank you very much! I am glad that this video will help you I really wanted to make this video and do a step by step to help people out and sounds like I did. Thank you for all the kind words and watching and commenting!
@@MeanBee392 you welcome your the best!!!
Thank you so much!!!
I have been searching for a video like this for quite a while now! This is awesome!
I am glad that you found it and hopefully find it informative! Thanks for your support!
Thank you so much i just took my front clip off and took my headlights out and sending them to oracle to have the new RGB DRL boards installed. Your video was so much help. Thank you again
That is SO awesome to hear and I am so glad that my video was so helpful for you and you were able to remove you bumper and headlights your self! Thanks for watching and commenting! 🐝
Man great video, I was hesitant at first but after watching this I am going to give it a shot. I have a 2015 Cat that needs a Intercooler pump replaced. Its under the driver side air box, I already have the wheels off and the inner fender wells removed so it may be a little easier to reach the fender bolts. Thanks Again.
Thanks! Glad you found this video helpful and informative. Hopefully my video was able to help you out on your project!
Very impressive video, I'm doing mine tomorrow. I'm installing a new grille to my 2017 Challenger GT, thank you for your concise and informative instructional video.
Shawn Williams Thank you for all the kind words! How did removing your bumper and replacing your grill go?
I actually done it and it came out flawless thanks to you brother.
Shawn Williams That is awesome to hear brother! I am glad this video was helpful and informative for you! Sorry I didn't comment back for so long but for some reason it never popped up your comment until tonight for me.
Awesome video!! Had to replace my fender and this was gold. Thanks man.
Andrew Archuleta Thank you I really appreciate it! I am really glad this video was able to help you out! Hopefully your car is ok though since you had to replace the fender!
Thanks for this video, I've gotta change my radiator and you helped me a lot! 🤝
Thank you for this! I'm going to have to remove this from my 2016, and your video takes my worries away. I'll just schedule two or three hours on a Saturday to do it.
You are very welcome! Hopefully it all goes well and I am glad to hear that my video is helpful and informative for you! Thanks for your time watching and commenting!
Great video👍i have a 2012 im going to replace headlights with air intake headlights for my intake this video is perfect(plus u took out less bolts than other videos I've seen)👍
Thanks 👍! I am glad you enjoyed it and hopefully it will come in very helpful for you when you are removing yours. Haha that's a good thing and just trying to make it as easy as possible for everyone. if you have any questions let me know and I will try to help you out. Thanks for watching and commenting!
Very well done. Great patience taking the time to go thru the steps. Excellent video quality. Definitely a pucker factor without some kinda guidance from you. Now we can all do this without the oh sh-t factor! Thanx again. Subbed
Thank you very much for all the kind words! I am glad you enjoyed this video and found it helpful and thank you so much for subscribing! I try to do the best as possible how to videos to help people feel comfortable doing thing like this their self's. Thanks again for your support!
Well I thank you! Trolling TH-cam for a detailed 2015 challenger front bumper removal, and wow! Just what I needed. Thanks again!
You are very welcome! I am glad this video is what you needed and was looking for! That's awesome that it helped you out and is always a great feeling when I can make content to help people out! Thanks for watching and commenting!
Awesome step by step. Made it so much easier. You're the man !!
That's awesome to hear that you found the video helpful and informative! Thanks for watching and commenting!
Very good video. Instructions are clear and concise.
Thank you!
Nice! Thx for this video. I was looking at my new challenger and wondering why my 2014 model looked a lot nicer and it was the new grille. Can't wait to replace it.
You are welcome and I am glad to hear that you enjoyed the video and it is helpful to you! Let me know how replacing it goes if you don't mind. Thanks for watching and commenting buddy!
Great and detailed video. I have unfortunately bumped into someone ahead of me at 0.5 mph and the inner plastic has cracked by the left headlight, unglued from bumper and pushed out on the very left lateral side. Thus, I need to get the bumper off in order to push it all back together and try to glue it back with some sort of silicone glue that OEM uses.
What do you replace the broken plastic rivets with when placing the bumper back?
Vytautas Vaicys Dang sorry to hear about your bad luck! I will be doing an bumper install video this weekend hopefully! But for the plastic rivets just replace them with 1/4 inch push rivets. You can get them at any auto parts store, you can get (Dorman, part number 961-075D) or (Help, part number 961-050) hopefully this will help you out! If you have any more questions let me know!
Wow I have to thank you 🙏 my hat is off to you for doing that to your car so we can learn. My buddies scat pack challenger chin splitter was almost yanked off by a parking slab so we will be removing the facia. Can’t wait to see you install it back on. I will subscribe. Thanks again.
Thanks and glad you enjoyed the video and it is helpful to you! That's a bummer to hear but can be easily fixed. The install video is in my videos also hopefully they will be very helpful for you guys. Thanks you for your kind words and subscribing to the channel, watching and commenting!
funally a good video in how to pull the bumper off!
i broke a headlight after hitting a bird and i been wondering how to remouve the bumper to change my headlight housing!
thank you!
great video! 👍👍👍
Thanks! Glad this video is helpful and informative for you. Dang that sucks that you hit a bird and it broke your headlight. How big was the bird? Hopefully this video will make replacing your headlight much easier. Thanks for watching and commenting!
To take the fender of the same car do you need to remove the front bumper first ?
Thanks a Ton. I bought a totaled 2016 Shaker car that I am reconstructing. The front was smashed and most pieces missing. It's like a jigsaw puzzle with pieces missing. Now I see where all the parts go to put it back together.
You're welcome! Glad you found this video helpful and informative. Haha I bet it does feel like a jigsaw puzzle. Hopefully your project is going good and this video is helping out along the way. Thanks for your support!
I'm planning to do the same soon - same thing with most pieces missing on the one I want. This video is great help seeing all the inners behind the front bumper cover.
It is the best and easiest way bumper removal video for my 2016 dodge challenger sxt plus. Than you.
That's awesome to hear and I am happy to hear that the video was so helpful for you!
“Not all heroes wear capes” 💪🏾 thanks man that helped out a lot
Thanks buddy that means a lot! I am really glad that this video is helpful to you! That's why I love making videos is to help other people out! Thanks for watching and commenting.
I love it, most practical easy to fallow video tutorial I have seen on that definitly in my favorites, I am constantly adding mods to my car and rwmoving the front bumper is essntial for mi thanks a lot for this video bro
Thank you I really appreciate all the kind words! I like to try to make the best video and an easy step by step to follow for everyone. I am glad this video will help you! You're welcome and thanks for watching and commenting!
Excellent video, well done with great talk thru directions! Thank you bro. Keep up the greatvideos
Thank you! I am glad you enjoyed the video. You're welcome and hopefully it was helpful. Thanks for watching and commenting and will do!
great video, I have a question about the lower air dam.....is there a reinforcement in it? Is it secured with the same push pins as the ones you pulled above the headlight covers? Thanks in advance for the help.
Thank you! Are you talking about the lower lip/splitter? If so it is held on by push pins, plastic rivets, and plastic tabs that are pushed in. Hopefully this helps! Let me know if it does or if you have any more questions I would be glad to answer/ help you out!
Wow,great video very well done.......I do have a question for you.....I have a 2020 Challenger SXT that the factory fog lamps were not ordered at the time, I plan to go with a aftermarket fog lamp assembly that will have brackets that come with the kit.......My question here, is there a place in behind the bumper cover that the brackets can be mounted to hold the fog lamps in place ........The front cover has the precut outs for the fog lamps after the black caps are removed.......Also the kit is specifically made for 2015 to 2020 Dodge Challengers........Thanks.
Thanks and glad to hear that you enjoyed the video! There will be places to mount your fog lights to behind the cut outs but I would check the instructions because they might have better info on a solid mounting point for them. Hopefully that helps.
@@MeanBee392 Thanks MeanBee392.....And keep those awesome videos coming 👍
You're welcome! Will do and thanks for your support buddy!
I got a question to ask, is it possible to remove just the silver grille that is attached to the front bumper and attach the 2007-2014 silver grille? Or is the only way to get that look is by replacing the entire front bumper? I love the look of the 2007-2014 front bumper silver grille, but everything else I prefer the 2015+
You can remove it from the bumper but the one that you like is going to have different size to it (height for sure and headlight openings) but I am sure you could get creative and make it work. If you do something like this keep me posted because I would love to see. Thanks for watching and commenting!
Oh I've been looking for this video for a while. So happy I found it thanks this will help so much!!
That's awesome to hear and glad it will be helpful to you! You're welcome and thank you for watching and commenting!
damn dude I just don't have it in me to do this - I would 100% lose or mess up screw etc. Nice job.... I'm sure this will come in handy for people looking to do some custom lights/intakes etc.
R/T Life Hahaha that's funny brother! I hope it does come in handy for someone! That is very true and even if someone is going to wrap the car or do any kind of grill or badge work it might be a good video.
That video was great. Pulling my front bumper off to change the splitter to an SRT style. My car is B5 blue too.
I know this is an older video, but thanks for showing this. May need to do it myself here soon.
You're welcome! If you have to do it soon hopefully my video will help out. Thanks for watching and commenting!
I need to change my wife's front bumper due to damage. Do you have any tips or advice on how to remove and re-install the wiring harness and fog lights from the old bumper into the new one? The new front bumper will not come equipped with those. THX in advance for any info & for the awesome and very informative video?
I am glad you found this video helpful and informative and I hope it helps you out when you start replacing your wife's front bumper. The harness will be attached by clips that you can just swap right over. Hopefully that helps and if you have any questions let me know and I will try to help you out.
@@MeanBee392 After further investigation, it seems that my wife's Challenger only needs the grill reinforcement. I will still need to remove the bumper (obviously) but my question is, did you notice if this reinforcement is hard to remove? I realize this wasn't the point of your job , but am just curious. This video will still be very helpful! Thanks.
Nice video, how do you detach the grille from the bumper,do you know?
Thanks! It has clips and plastic rivets that you have to drill or cut off. Sound harder than it really is but it's not that bad of a job. Hopefully this helps and thanks for watching and commenting!
Where can I buy some plastic rivets or push pins from plan on doing this mod next week and Great video
Ronald M You can get them at any auto parts store just make sure they are a 1/4 inch push pin. It’s easy to do but if it’s your first time it can be a bit intimidating but don’t let it scare you just take your time and it will go smoothly. I also have an install video and that might help you also. Thanks for watching and commenting and thanks for the compliment!
MeanBee392 ok thanks
Ronald M Absolutely you are very welcome!
Saved me a huge headache. Thank you!
That awesome to hear and I am really glad the video was helpful to you! You're welcome and thank you for watching and commenting!
You are the best !! Thank you for the video by any change do you think that front sp lip will fit an sxt 18 bumper?
Thanks bud! You are very welcome! Yes the front lip will fit your 2018 SXT front bumper. Thanks for watching and commenting!
Do you have a video on how to replace the Headlight bezel/cover? Mine are cracked and can’t find a video anywhere
Sorry for the late reply but I do have a video on my channel doing halo rings on them and I show hoe to disassemble and reassemble the head lights. Hopefully that will help.
Cool video very informative bro and you didn't have too true car guy that's why you did much love.
Thanks brother I am glad you enjoyed the video and hopefully it was helpful. Thanks for stopping in and watching and commenting!
What about the plastic rivets you popped out? Did you replace them?
Yes I did replace them with 1/4 plastic push rivets. Thanks for stopping in and watching and commenting!
does the harness have enough play to plug it back in while the bumper is off?
Unfortunately it does not. Hopefully the video was helpful and thanks for watching and commenting!
@MeanBee392 Just wondering, have you had to replace the radiator for the TSB these cars had for 2015 model with radiator seepage? It says it's necessary to remove the fascia like your video shows to replace the radiator.
I have not had to replace the radiator but removing the front bumper would be a must to change out the radiator. Do you have one that is leaking? If you do hopefully this video is helpful and informative for you. Thanks for watching and commenting!
Thanks so much. A better way to access the chin lip to replace. No jacks...awesome.
That is very true! I hope this video was helpful to you! Thanks for watching and commenting!
Very good video !
Ich have an issue with a creaking noise, sometimes hearing it when i am driving in a parking lot.
When i am pushing along the front bumper, there is also a craking.
Don't know, if it comes from the bumper, what I am hearing inside.
Maybe i will put the bumper off, put some anticreakingstuff underneath....
What do you mean ?
2015er R/T
Greetings
I would pull it off and check it out personally. But if it is something that doesn't bother you I don't think I would worry about taking it off but on a plus side it is very easy to take off and put back on.
Okay, thanks for your suggestion.
And yes, it's annoying for me....when therer are noises in a car :-)
I found so many, that will causes creaking noises...the sleeves over the ST/KW-Suspension....the brakeline mounted in the front....an the insulution of the front hood.
But this creaking at very low speed didn't go away :-)
You're welcome! Hahaha sounds like you are the same way that I am and small noises just drive me crazy! If you end up pulling the bumper and find something let me know I would be curious!
Okay,
today I removed the front Fascia.
I also disassembled the crash-plastic-stuff .
But, everything in the friont area is creaking......most of the things is fastend with this cheap plastik-clips.......
I fixed everything by using "Butyl"....put it betwen the gaps.
Also the frontgrills, the only way to getting them quiet was using butyl.
Hopefully, isue is fix :-)
Yeah they do have some cheap plastic clips! I know what butyl is and I think that should work great! Thanks for letting me know and hopefully it is no longer making any annoying noises!
Nice vid,nice camera work, nice Challenger.
Thank you I really appreciate all the kind words! Thank you for watching and commenting!
what are the tools specifics you’ve used in the video?
I do list them in the video when I am using them (I am just saying this because it has been a while since I did this) You will need a flat tip screwdriver, 3/8 ratchet, 3/8 extension, 3/8 universal joint, 10mm socket and possibly an 8mm socket. Hopefully this is helpful.
Nice bud 👍 thanks for the video I'm upgrading my Sxt Plus front airdam and still trying to figure out the best way to take on this challenge you took one for the team Mopar or no car!!🤘 Greatly appreciated 👊
Thanks and hopefully this video will offer some info and help for you to get your front airdam on. Thanks for watching and commenting I really appreciate it! MOPAR OR NO CAR!
I want to do a bumper conversion to get rid of the fog lights, I've removed my front bumper before for maintenance repair, is the front bumper hellcat/demon/widebody the same as the Scat Pack to remove/install?
Couldn't I just buy a factory hellcat bumper and install it? (including all clips/splitter)
Yes they are the same as long as it is a 2015 or newer. Lots of people with Scat Packs will do a Hellcat bumper conversion and it is very simple. Hopefully that's helpful and thanks for watching and commenting! 🐝
Man, I just did this and I would not do it just for fun. Why would somebody need to do it? Change the grill? I don’t think one would need to for a hellcat lower air box. Well I found out putting back together was simpler. Your a wild man. 👍🏻
LOL well you never know what to expect on this channel bro! No I don't think I would need to do it for the lower air box but man it would make it easy as heck lol! Thanks for watching brother!
MeanBee392 you did a great job of explaining it.
Thank you so much I appreciate the kind words brother!
Would you know If removing the bumper make an easier install for the Scat Pack Front Spoiler?
Sorry for the late reply but yes it would make it a lot easier to remove the bumper to change out the front spoiler. If this is a project that you end up doing hopefully this video will be helpful to you. Thanks for watching and commenting buddy and good luck. If you have any questions please feel free to ask.
MeanBee392 no worries! This video is very well done and detail to work is amazing! I also saw your video how to install the bumper back on. I have both saved and ready to watch again when the time is needed!
That's awesome to hear and glad they will be able to help you out! Thanks for the support!
Awesome job dude.!!! This video its amazing!!! I'm pretty sure that I can take my front bumper off.. thank you for sharing.. 🤙
Jaime Olvera Thanks! That's awesome to hear and that's what I like, to have a video as informative as possible to help people out so they can feel confident in doing it themselves. Thanks for watching and commenting!
About how long did it take to remove and replace the front clip? Not counting the videoing and editing
The first time I did it it took about 45 minutes to an hour but I can do it now in 15 to 20 minutes and it is very easy. Hopefully this is helpful and thanks for watching and commenting !
Are those the same wheels as the hellcats? With the 315's?
No they are not. My wheels are a 20 x 9 and unfortunately 245 tires. I would love to put some 315s on it someday!
Good job, it help me... my 1st challenge on a challenger.
What size nut is that that goes on the screw that’s on the bumper that you put into the fender?
I am not 100% for sure but I believe it is a 10mm. Thanks for watching and commenting!
Do you know if can be installed fog lights on any challenger? ( cuz I have a SXT 2015, and it hasn't, instead it has the black stuff on it) please answer if you know it.
Yes you can add factory fog lights by getting rid of your blanks "the black plastic pieces" but it can be a bit pricey. I would look at Steve White Motors on line to find them. Hopefully that helps.
@@MeanBee392 thanks man I appreciate.
You're welcome!
Im not sure if you said it, but about how long do you think it takes to remove and install a bumper?
The first time was about 20 minutes and I can do it now in under 10 it is very easy! Thanks for watching and commenting! 🐝
@@MeanBee392 Thanks for the reply. I ask because a shop wants to charge me for 5 hours of labor to replace a front bumper on a 2018. Really glad I watched your video beforehand. Subscribed 😁
You are welcome! Wow that's a lot of labor! Hopefully I was able to help you save some money! Thanks for subscribing and supporting the channel! Welcome to the MeanBee392 family! 🐝
Where do you get the push pins to reinstall into the fender wells?
You can get them at any parts store they are a 1/4 plastic push pen. Hopefully that helps and thanks for watching and commenting!
Thankyou!
Didn't see when you disconnected fog lights...Great video!
That was tough to show but that is the plug in on the passenger side with the red safety clip. It is a bit of a reach but it is doable. Thanks and glad you enjoyed the video! Thanks for watching and commenting!
Thank you bro for the amazing video, my only question i can't find this deep flexible socket i tried every where can't find it if u just can help me with link or a shop would be great
Thank u for the great efforts
You are very welcome! Thanks for the support on the channel! Here is a link for one like I am using in the video www.amazon.com/Craftsman-Universal-Joint-Drive/dp/B00GWBLLQ8/ref=sr_1_3?keywords=3%2F8+universal+joint&qid=1578363414&sr=8-3 Hopefully this is helpful and the video also! Thanks for watching and commenting!
I am installing a srt splitter on my 2014 this was very helpful thank you
That's going to look good! That's awesome to hear that my video was helpful to you it means a lot! Was your 14 much different than mine? Thanks for watching and commenting!
@@MeanBee392 yeah it's different it's white sxt
I have black hellcat wheels and hood
Got it installed today
I bet it looks really sharp with the hood and wheels and now the new front splitter! Thanks for letting me know and hopefully it all went smooth for you!
So wait...I've seen some videos where some people have stated that you have to get underneath it and pull out 7 pins as well before you can remove the front bumper. Do you not have to do that? I have a 2016 Challenger.
Blacktop_Shady The only thing you have to pull out on the bottom is the screws that I showed in the video. Everything that I removed in this video is all that needs to be taken off in order to remove your front bumper. Hopefully this is helpful and thanks for watching and commenting!
@@MeanBee392 Awesome! That's good to know. I was worried about having to do that. Thanks for posting this guide. Much appreciated. ✌
Blacktop_Shady Absolutely brother! Hopefully this video will be very helpful to you! Like I said just follow it step by step and you won’t have any problems. If you have any questions let me know.
Thank you! Totally helped with my scatpack lip installation!
You're welcome! That is awesome to hear and I am glad the video was helpful!
Can you unplug the fog lights after taking off the bumper?
Yes you can but just be careful not to rip the wires out of the plug in because they are not real long. 🐝
@@MeanBee392 I did it already. Thank you so much for this video!
Sorry for the late reply but glad it worked out for you and the video was helpful! 🐝
Great video, well explained👏👏👏👏
Thanks! Happy to hear that you liked the video and hopefully it is helpful for you! Thanks for watching and commenting!
Ik its old video and I shouldn't be commenting cause you might not respond, but if you happen to see this, where did you get your tools, home depot or online? I'm wanting to remove the chrome rectangle trims off from the grill soon.
It is a older video but I always try my best to respond to all of my comments because I appreciate my viewers and especially when they take the time to watch and comment in my videos. I am a mechanic by trade and a lot of my tools come off of tool trucks Snap-On, Mac, Matco, and so on but you do not need expensive tools to do this job and you would be able to fine everything at a Home Depot or Lowes. Hopefully this is helpful and you will be able to use this video for a reference. Thanks for watching and commenting!
MeanBee392 Ah ok and thanks I appreciate your videos you explain very well on where and how to remove/reinsert certain things, very informational keep up the good work! 😃👍
You're very welcome buddy! I am glad to hear that you enjoy my videos and find them helpful and informative. Thanks for your support buddy and I will keep it up!
Where would I get replacement rivets for the wheel well?
I got them from the auto parts store. You need a 1/4 plastic push rivet to replace them. Hopefully this is helpful and thanks for watching and commenting!
@@MeanBee392 THX greatly appreciated been looking for a detailed video for the longest thx for everything 💪
@@MeanBee392 you can get plastic rivets from parts stores (car quest / napa) and rivet them back like factory. I am tearing a front bumper that has both. the rivets and the push clips. Both work fine, but the rivets are factory style. You can use a regular rivet gun, but watch harbor freight for sales, they have an air rivet gun that works awesome For those.
@Bobby Ghost Your welcome brother and glad you enjoy the video!
@daviddmac Thanks for helping with the reply and great info that you gave as well! Thanks for helping out and your support buddy!
My passenger hid headlight went out, do i have to remove the bumper to change it?
No you would not need to remove the bumper if it is just the bulb and not the ballast. Just remove that top plastic cover that just snaps in and that will give you full access to it. Hopefully that is helpful and thanks for watching and commenting!
MeanBee392 i tried reaching for it but theres like no room for my hand so the bulb wont come out, is there like a clip that holds it in place or something?
I do believe their is a clip that holds it in place and it is a tight squeeze.
MeanBee392 its not the bulb cus I switched it n its only the passenger side
People before u try to switch out any lights, check ur fuses. Thats all it was....a damn 🤬 fuse 🤦♂️
Are the rivets reusable
All of them are except the ones in the inner wheel well.
Will this video work for sxt
Yes it will.
Where can I buy rivet replacement?
The ones I got are just from a local parts store. 🐝
Actually i have small issue with my front bumper removal , can u help me out ?
Absolutely I will do my best to help you out! What kind of small problem are you having?
@@MeanBee392 i need to send u some photo to explain the problem, can i have ur email plz ❤️
Sorry but I don't have an e-mail for my channel. 🐝
Is the 2014 the same
I am going to installe a set 8 splitter on my 2014 set so this handy
I don't know 100% but I am sure that if it is not the same it will be very close. Hopefully this video will be helpful for you! Let me know how your install goes. Thanks for watching and commenting!
Dude really good job. Great vid.
Thank you very much!
Fine job very informative and you made it interesting
Thanks and glad to hear that you enjoyed the video! Thanks for watching and commenting!
Can you make a vid showing how to remove the upper grill reinforcement?!?!
Are you asking about the one that the push pins go into? 🐝
Thanks Man...awesome video. Very informative!
You are very welcome and I am glad you liked it and it was informative! Thanks for your support! 🐝
Thank you sir for all the info 👍🏻👊🏻
You’re welcome and thank you for your support! Hopefully this video is helpful for you.
Superior Tutorial thank you so much for making this great content.
You're very welcome! I am glad it was helpful and thanks for watching and commenting! 🐝
Thanks 4 tha video .. will helps a lot of people as me
Put headlight and turn signal in the tags! Im here for a turn signal. Thanks for the vid!
Thanks and will do. You're welcome and hopefully it was helpful for you.
@@MeanBee392 it definitely was, replacing the whole headlight assembly for a turn signal is rough though 🤯
That's great to hear! It is a bit rough but really not to hard to do once you have done it once.