Are you serious right now! I was going to use your removal video for install, and low and behold here is the install! I can't believe my luck! thanks a billion bro
Hahaha that is so funny and great to hear! I am glad that I have some video that will hopefully help you out with your car and the job that you are doing! You are welcome and thank you for the complements and support! I appreciate everything bro!
R/T Life That's what I am hoping for and I hope it does! Thanks for all the kind words and support I really appreciate it brother! Did you see the teaser?
Another great MeanBee392 instructional video!! That paper in the socket trick is awesome, never thought of that. Those lights are looking awesome!! Staying tuned.
Daytona 5.7 Thank you so much brother and for the continued support! It’s a trick that I wanted to share and it can make life easy when trying to get a nut on a bolt in a hard to reach area! Thanks and more to come!
THANK YOU! i was having a hard time trying to figure out how to rivet the inside back on. but now the pushpins are a fantastic way to go! you now have another subscriber. thanks bro.
You're welcome and I am glad you found this video helpful! Haha yes the plastic push pins are the best way to go! Thanks for subscribing and supporting the channel! 🐝
Very good with being very informative and detailed, I appreciate your time for making quality review videos. You have earned yourself yet another subscriber... Keep up the good job !!!
This is a great and thorough video. I really appreciate seeing this and am glad you did a removal video as well. I am going to replace mine which got damaged in Feb and this is by far the best video that I have seen explaining how to do this.
Thanks buddy! I am really glad that you enjoyed this video and that you found it helpful! Hopefully it will make the job replacing yours much easier and if you have any questions feel free to hit me up! Thanks for the support buddy!
@@MeanBee392 Thank you so much! I really appreciate that. Oh your video definitely will help. I already looked on my car at what you pointed out in the video in order to prepare myself. I know I lost some plastic pieces at the bottom while driving. They were some kind of air ducts or intakes. I have to replace my drivers side wheel well too, so hopefully thats not to difficult. Thank you so much again. Look forward to seeing your future videos.
That's so awesome to hear and I am really glad it is helpful for you! That will all be very easy to replace and especially when you have the front bumper off. You're very welcome and I am glad you are enjoying the content and thanks for the support!
Great video man. I might just need to put this in one of my play lists😉. Patience is key with these types of things. Sometimes I can try and rush things too much. I am going to need to go back and watch the removal when I get a chance. Your install videos are always amazing. Always so descriptive and helpful. Great job man.
Thanks! That would be awesome brother!Yes when doing stuff you really want to take your time just so you don't want to mess anything up. The removal video is a bit long but I go over everything! Thanks again for all the kind words brother I really appreciate it and it means a ton to me! There is a little teaser in this video did you see it?
Thanks and glad you enjoyed it! That’s a very good idea! Those blankets are very thick and would help protect the bumper from any damage and like you mentioned you could use it for a lot of other work. Thanks for suggesting that.
Great video I’m about to put the SRT splitter on my car and your two videos for removal and install were perfect and thanks for including the Dorman item number.
Thank you and I am glad you enjoyed the video and it was helpful for you! That's good to know that they are almost the same and thanks for sharing that. Thanks and hopefully that tip helped you and it is a handy one to remember. Thanks for watching and commenting!
Hey buddy, great video as always. I love the lights you put in, looks great. You need to have a TV channel,lol, by far the best instructional videos by far. Thanks for your time and video. It’s a good thing you don’t live near me, I would have you help me with the Warlock when I get ready to take it apart, haha . Take care my friend!
Thanks so much buddy! Thanks they have turned out awesome! Lol I would be happy with a TV channel but at least I have my TH-cam channel! Thank you I do my best trying to explain everything and not make it confusing for people. You are welcome and thanks for all the support on the channel! Lol if I did live closer I would definitely help you take it apart! Sounds great and I will you also take care and have a great week!
Hey, that’s a nice video man question ?where would I be able to find the front bumper the same color for my vehicle? I got a 2022 Dodge Challenger SXT frost blue I’m thinking of going through my insurance but if I can just get the product myself heck, I rather do that.
Thanks! That's the hard part is finding one that is the same color and the only advice I have is checking salvage yards. I don't blame you and I would rather do it myself as well.
Just finished mine today because I had to replace a part due to a tug of war with a parking stump and i lost. this saved my ass. One question though, I noticed that the nuts in the fenders were hand tightened, that sort of worried me a bit. I tightened them a little more than they were when I took them off. Hope that isnt an issue
NICE! O man that a bummer and those parking blocks are not nice to our cars at all! That is so awesome to hear that this video was helpful for you and hopefully it saved you some money as well! Nope that wont hurt them at all just don't go to tight because they are secured in by a plastic backing and if they get to tight they can pull out of that but if that happened you would of noticed. Glad to hear you got your car fixed and up and going! Thanks for watching and commenting! 🐝
So I got a new grill because I wanted the standard Scat Pack chrome trim rings versus the black out versions that came on my T/A. I was stoked to do this removal/install with your very clear instructions, but I'm just now realizing I'm probably screwed because the previous owner did an aftermarket lowering on the car and I doubt there's enough clearance in the wheel well to get in there and open the cover up to get at the bolts from the back. I'm guessing this might have to be done on a lift for me. I shudder to think how much the dealer will charge to do this swapout for me. A lot of potential expense just for some trim rings. I wonder if there's really no way to get in behind them from the front and push those pressure clips to get the trim rings off without pulling the whole assembly like you've done.
THEUrinalCake Thank you very much for the kind words! With the car being lowered I think you would still be able to get in there but if you can’t personally I would pull the front wheels and then you would have plenty of room. You could always pull one wheel at a time and do one side then put the wheel back on and then do the other side. I know I wouldn’t even want to see what the dealer would charge to do this so hopefully this helps you and will be able to help you do the job your self and save some money! I don’t think there’s anyway to get them out without removing the front bumper unfortunately. Let me know if this helps and if you are able to do it?
Love the lights bro! Looking forward to seeing more on those. But with the bumper - the Chally's seem to be a little easier than the chargers when it comes to bumper removal. I haven't done it on mine, but I've watched a couple videos on the chargers. Or maybe you just make it look easier????
CTCharger Thanks brother and thanks you for watching to the end! I have not done it on a Charger but it should be the same concept and really not that hard to do. The first time doing something like that it will be a bit nerve racking but if you just take your time it will not be bad. I have done mine a few times now and I can get it off the car in ten minutes and put it back on in a bit less than ten minutes hahaha!
Thanks bud! Awesome you are going to love having color shift halos! I will be doing a video on opening up a Challenger head light here soon so maybe that video will help you out also! I am glad to hear that this video was helpful to you and that's what I like is to be able to have videos to help people out. Thanks for watching and commenting I appreciate it!
Cristian Balbuena Thank you! NICE that's awesome I would love to put a Procharger on my car! You can get them at any auto parts store they don't have to be the same brand that I am using just as long as it's a 1/4 push pin and you will need six of them.
SubZeroR/T Yes I would say it would be easier but it would be possible doing it with the bumper on the car also just as long as you can get enough room under the car safely to work on it. I do have a removal video that would be very helpful if you do remove the bumper. Thanks and thanks for the support!
Great Video Brother! So that’s why you haven’t made a video for awhile you have been running all them lights. Haha I look forward to that video. That socket trick I have been using for years except I use electrical tape. I’m going to send you a message on instagram because I want to send you something so check your messages I should be sending it here in a little while.
FAB Automotive Detailing Thank you so much brother!!! Yeah that is why it has been a while and I had a mess up on my part so that made it take a bit longer also. Got to love the little tricks that us mechanics use to make our lifes easier! I never thought about electrical tape but I bet it works really well also. Awesome I will keep an eye out!
Hey man! I was curious...what’s the piece that connects the top of the front bumper to the support bracket? It’s the piece that you first layer on top to set it
Personally I wouldn't just because there is a lot mo fasteners holding the bumper on. Could you use an oversized washer to grab a bit of the metal and tighten it down?
Does anyone happen to know the size of the bolts and nuts? Previous owner lost the hardware and trying to put it back together but don’t know what size bolts and nuts I need
I hope to do it within the next few weeks because I need to replace a demon eye in my lights. That's great to hear and hopefully you wont mind waiting until I get that video done. Thanks again for all of your support and kind words I greatly appreciate it!
I'm going to go ahead and wait! I appreciate you! I have a b5 blue challenger also it's just an sxt but I'm going to make it look good! I appreciate you alot and what your doing for lil guys like me! That dont have all the money in the world!💯🐐
@@luckyluciano2900 Sounds great I will try to get it done as soon as possible. Very nice and nothing wrong with an SXT that's what my wife's charger is and they are great as well! You dont have to have a higher trim model to have a great car they all look great. No problem but to be honest I am also just a little guy and the same as everyone else. I just make videos in hopes that it will help all of us out in some way and to give people the confidence to work on their cars. I know the struggles of money but just keep grinding. Thanks again for your support I really appreciate it brother!
@@MeanBee392 hey I appreciate you and yes watching your videos gives me the confidence that I can do my own. Please keep up the good work! I want to put and SRT front chin spoiler. Are you doing any videos like that? If so that would be great also!
@@luckyluciano2900 That's awesome to hear that my videos are helpful! Will do and I will keep the content coming. That would look really good and give the front end a more aggressive look! I haven't had anything like that planned because I already have that one but I could point out how yo do it in a video. Once again thanks for all of your support on the channel!
So where he sat the bumper up front to rest it. Do u know what those 2 plastic pieces are called and what hardware those use to mount to the car. Like push pins or?
I am not sure what they are called. If you look up Steve White Motors and Parts they have some very helpful break downs and also sale parts at a very reasonable price to. Hopefully that helps.
I am sorry to hear that it is giving you problems. Take a break then come back to it. Barley hang the upper front on and then slowly and evenly work the sides until you have them lined up and push them in until they click. I hope that makes sense and is helpful and you get it installed back on without any problems bud. If you have any more questions please feel free to ask.
That's a bummer that it got damaged! What part of it are you having a problem with. If you have any questions let me know and I will try to help you out the best I can. Thanks for watching and commenting and best of luck buddy.
MeanBee392 I ended up getting it swapped out after wrestling with it for a few hours. If I were as thoughtful as you I’d post something about how to do it to avoid wasting a lot of time scratching my head. Your front bumper removal and installation videos were a huge help, and I’m not understating. Thanks.
That's great that you did end up getting it! That would of been a great video to do. That's awesome to hear and I am glad it was very helpful for you! You're welcome and thanks for your support!
Are you serious right now! I was going to use your removal video for install, and low and behold here is the install! I can't believe my luck! thanks a billion bro
Hahaha that is so funny and great to hear! I am glad that I have some video that will hopefully help you out with your car and the job that you are doing! You are welcome and thank you for the complements and support! I appreciate everything bro!
This is 100% going to save some peoples butts down the road! Nice job & pretty much went over all the details perfectly
R/T Life That's what I am hoping for and I hope it does! Thanks for all the kind words and support I really appreciate it brother! Did you see the teaser?
Oh hell yah that engine bay is looking bad ass - going to be a big hit at night shows!
R/T Life Thanks brother! That is the plan at least one night show on the list!
Another great MeanBee392 instructional video!! That paper in the socket trick is awesome, never thought of that. Those lights are looking awesome!! Staying tuned.
Daytona 5.7 Thank you so much brother and for the continued support! It’s a trick that I wanted to share and it can make life easy when trying to get a nut on a bolt in a hard to reach area! Thanks and more to come!
This vid was MUCH needed, kudos! I figured that Illumination was the driving force here.
THANK YOU! i was having a hard time trying to figure out how to rivet the inside back on. but now the pushpins are a fantastic way to go! you now have another subscriber. thanks bro.
You're welcome and I am glad you found this video helpful! Haha yes the plastic push pins are the best way to go! Thanks for subscribing and supporting the channel! 🐝
Very good with being very informative and detailed, I appreciate your time for making quality review videos. You have earned yourself yet another subscriber... Keep up the good job !!!
This is a great and thorough video. I really appreciate seeing this and am glad you did a removal video as well. I am going to replace mine which got damaged in Feb and this is by far the best video that I have seen explaining how to do this.
Thanks buddy! I am really glad that you enjoyed this video and that you found it helpful! Hopefully it will make the job replacing yours much easier and if you have any questions feel free to hit me up! Thanks for the support buddy!
@@MeanBee392 Thank you so much! I really appreciate that. Oh your video definitely will help. I already looked on my car at what you pointed out in the video in order to prepare myself. I know I lost some plastic pieces at the bottom while driving. They were some kind of air ducts or intakes. I have to replace my drivers side wheel well too, so hopefully thats not to difficult. Thank you so much again. Look forward to seeing your future videos.
That's so awesome to hear and I am really glad it is helpful for you! That will all be very easy to replace and especially when you have the front bumper off. You're very welcome and I am glad you are enjoying the content and thanks for the support!
Great video man. I might just need to put this in one of my play lists😉. Patience is key with these types of things. Sometimes I can try and rush things too much. I am going to need to go back and watch the removal when I get a chance. Your install videos are always amazing. Always so descriptive and helpful. Great job man.
Thanks! That would be awesome brother!Yes when doing stuff you really want to take your time just so you don't want to mess anything up. The removal video is a bit long but I go over everything! Thanks again for all the kind words brother I really appreciate it and it means a ton to me! There is a little teaser in this video did you see it?
Great vid. Might I suggest one of those big moving blankets underneath. They are also good for other work so for me it was $ well spent.
Thanks and glad you enjoyed it! That’s a very good idea! Those blankets are very thick and would help protect the bumper from any damage and like you mentioned you could use it for a lot of other work. Thanks for suggesting that.
Old video but still going to come in clutch this weekend! Thanks bud!
Great video I’m about to put the SRT splitter on my car and your two videos for removal and install were perfect and thanks for including the Dorman item number.
That's is awesome to hear and I am glad you have found the videos to be helpful and informative! You're welcome and thanks for your support!
Great job description. Tools and hardware explained.
Thanks and glad to hear that you enjoyed the video!
Awesome front clip install video! I own a 2009 R/T 5.7 and it was pretty much the same. Great tip with the paper and nut! 👍
Thank you and I am glad you enjoyed the video and it was helpful for you! That's good to know that they are almost the same and thanks for sharing that. Thanks and hopefully that tip helped you and it is a handy one to remember. Thanks for watching and commenting!
Hey buddy, great video as always. I love the lights you put in, looks great. You need to have a TV channel,lol, by far the best instructional videos by far. Thanks for your time and video. It’s a good thing you don’t live near me, I would have you help me with the Warlock when I get ready to take it apart, haha . Take care my friend!
Thanks so much buddy! Thanks they have turned out awesome! Lol I would be happy with a TV channel but at least I have my TH-cam channel! Thank you I do my best trying to explain everything and not make it confusing for people. You are welcome and thanks for all the support on the channel! Lol if I did live closer I would definitely help you take it apart! Sounds great and I will you also take care and have a great week!
You too
Hey, that’s a nice video man question ?where would I be able to find the front bumper the same color for my vehicle? I got a 2022 Dodge Challenger SXT frost blue I’m thinking of going through my insurance but if I can just get the product myself heck, I rather do that.
Thanks! That's the hard part is finding one that is the same color and the only advice I have is checking salvage yards. I don't blame you and I would rather do it myself as well.
I appreciate this a ton! Great video very helpful and to the point
Just finished mine today because I had to replace a part due to a tug of war with a parking stump and i lost. this saved my ass. One question though, I noticed that the nuts in the fenders were hand tightened, that sort of worried me a bit. I tightened them a little more than they were when I took them off. Hope that isnt an issue
NICE! O man that a bummer and those parking blocks are not nice to our cars at all! That is so awesome to hear that this video was helpful for you and hopefully it saved you some money as well! Nope that wont hurt them at all just don't go to tight because they are secured in by a plastic backing and if they get to tight they can pull out of that but if that happened you would of noticed. Glad to hear you got your car fixed and up and going! Thanks for watching and commenting! 🐝
So I got a new grill because I wanted the standard Scat Pack chrome trim rings versus the black out versions that came on my T/A. I was stoked to do this removal/install with your very clear instructions, but I'm just now realizing I'm probably screwed because the previous owner did an aftermarket lowering on the car and I doubt there's enough clearance in the wheel well to get in there and open the cover up to get at the bolts from the back. I'm guessing this might have to be done on a lift for me. I shudder to think how much the dealer will charge to do this swapout for me. A lot of potential expense just for some trim rings. I wonder if there's really no way to get in behind them from the front and push those pressure clips to get the trim rings off without pulling the whole assembly like you've done.
THEUrinalCake Thank you very much for the kind words! With the car being lowered I think you would still be able to get in there but if you can’t personally I would pull the front wheels and then you would have plenty of room. You could always pull one wheel at a time and do one side then put the wheel back on and then do the other side. I know I wouldn’t even want to see what the dealer would charge to do this so hopefully this helps you and will be able to help you do the job your self and save some money! I don’t think there’s anyway to get them out without removing the front bumper unfortunately. Let me know if this helps and if you are able to do it?
Great video man. I just font have the patience to do this. If one of my fog lights die its gonna stay dead unless i drive up to see you
dasllamas Thanks! Hahaha it's not hard to do... honestly it's a simple job.
MeanBee392 you keep saying that but im still bringing it to you
dasllamas Hahaha
LOL good one! Always impressed with your install video's however the end was sweet!!
Thanks! Glad you liked the end!
Very nice and detailed video man! Great video!
K 1500 Thanks brother! Did you see the teaser in the video?
MeanBee392 yeah haha. Looks nice!
K 1500 Thanks bro I thought you might like it!
Love the lights bro! Looking forward to seeing more on those. But with the bumper - the Chally's seem to be a little easier than the chargers when it comes to bumper removal. I haven't done it on mine, but I've watched a couple videos on the chargers. Or maybe you just make it look easier????
CTCharger Thanks brother and thanks you for watching to the end! I have not done it on a Charger but it should be the same concept and really not that hard to do. The first time doing something like that it will be a bit nerve racking but if you just take your time it will not be bad. I have done mine a few times now and I can get it off the car in ten minutes and put it back on in a bit less than ten minutes hahaha!
I appreciate you and the videos I just bought some Oracle colorshift halo lights I wanna put in. With your videos I can now do it. Keep it up! 💯👊🏽
Thanks bud! Awesome you are going to love having color shift halos! I will be doing a video on opening up a Challenger head light here soon so maybe that video will help you out also! I am glad to hear that this video was helpful to you and that's what I like is to be able to have videos to help people out. Thanks for watching and commenting I appreciate it!
Yes sir I would like that headlight disassemble. Videos are very educational! Appreciate you! 💯
Thanks bud I appreciate it!
Nice vide man, I’m doing a Procharger install. Where did you get the push rivets.
Cristian Balbuena Thank you! NICE that's awesome I would love to put a Procharger on my car! You can get them at any auto parts store they don't have to be the same brand that I am using just as long as it's a 1/4 push pin and you will need six of them.
Dope bro!!! love the tease at end of the new setup. See you soon!
Mod FX Customs Thanks bro! Hahaha I had to throw that in! I can’t wait and I will be seeing you soon!!!
Is it easier to install srt lip with bumper off? Nice video
SubZeroR/T Yes I would say it would be easier but it would be possible doing it with the bumper on the car also just as long as you can get enough room under the car safely to work on it. I do have a removal video that would be very helpful if you do remove the bumper. Thanks and thanks for the support!
Great Video Brother! So that’s why you haven’t made a video for awhile you have been running all them lights. Haha I look forward to that video. That socket trick I have been using for years except I use electrical tape. I’m going to send you a message on instagram because I want to send you something so check your messages I should be sending it here in a little while.
FAB Automotive Detailing Thank you so much brother!!! Yeah that is why it has been a while and I had a mess up on my part so that made it take a bit longer also. Got to love the little tricks that us mechanics use to make our lifes easier! I never thought about electrical tape but I bet it works really well also. Awesome I will keep an eye out!
For the new dorman push pins you bought would you then have to use a flat head to push em out?
Yes you would use a flat head screwdriver to pop the lock up and then carefully pry them out. Thanks again for watching and commenting buddy!
Dose anyone know if the trim matters ?
Like is this the same process for all trims?
Hey man! I was curious...what’s the piece that connects the top of the front bumper to the support bracket? It’s the piece that you first layer on top to set it
I am not for sure of the technical name. Are you needing to find some?
so on the first bolt you showed to connect my fender metal piece is snapped, should i get an entire new fender?
Personally I wouldn't just because there is a lot mo fasteners holding the bumper on. Could you use an oversized washer to grab a bit of the metal and tighten it down?
@@MeanBee392 i could try that but i’m going to try and weld some metal to the back of it then drill a hole and put a rivet
That's not a bad idea just watch the heat and keep it low so you don't bubble or burn the paint.
Does anyone happen to know the size of the bolts and nuts? Previous owner lost the hardware and trying to put it back together but don’t know what size bolts and nuts I need
What are the size of the pushpins that go into the rubber stripping at the edge of the hood
I am not for sure on those ones but a guess would be 1/4 inch.
Can you tell me what parts u need from from radiator to bumper
Not sure exactly you are needing to replace.
Does anyone know what the black plastic piece that he slides bumper into at the begging is called? Mine is cracked and have to replace it
Awesome video!! Great job!
Thank you!
When you going to do a video on taking apart the headlights! I want to put them in soon I feel watching your videos would fully get a grasp on it! 💯👌🏾
I hope to do it within the next few weeks because I need to replace a demon eye in my lights. That's great to hear and hopefully you wont mind waiting until I get that video done. Thanks again for all of your support and kind words I greatly appreciate it!
I'm going to go ahead and wait! I appreciate you! I have a b5 blue challenger also it's just an sxt but I'm going to make it look good! I appreciate you alot and what your doing for lil guys like me! That dont have all the money in the world!💯🐐
@@luckyluciano2900 Sounds great I will try to get it done as soon as possible. Very nice and nothing wrong with an SXT that's what my wife's charger is and they are great as well! You dont have to have a higher trim model to have a great car they all look great. No problem but to be honest I am also just a little guy and the same as everyone else. I just make videos in hopes that it will help all of us out in some way and to give people the confidence to work on their cars. I know the struggles of money but just keep grinding. Thanks again for your support I really appreciate it brother!
@@MeanBee392 hey I appreciate you and yes watching your videos gives me the confidence that I can do my own. Please keep up the good work! I want to put and SRT front chin spoiler. Are you doing any videos like that? If so that would be great also!
@@luckyluciano2900 That's awesome to hear that my videos are helpful! Will do and I will keep the content coming. That would look really good and give the front end a more aggressive look! I haven't had anything like that planned because I already have that one but I could point out how yo do it in a video. Once again thanks for all of your support on the channel!
So where he sat the bumper up front to rest it. Do u know what those 2 plastic pieces are called and what hardware those use to mount to the car. Like push pins or?
I am not sure what they are called. If you look up Steve White Motors and Parts they have some very helpful break downs and also sale parts at a very reasonable price to. Hopefully that helps.
@@MeanBee392 yes that help a lot. The part is called the front fascia support.
Awesome!
what about the reinforcement install? The black plastic under the lip
I never removed it to remove the bumper that is what the bolts under the lip are holding on when I installed the bumper.🐝
Install a 2015 SRT Air deflector SXT air deflector?? Which air deflector bumper is this?
The Scatpack has the SRT air deflector. But both bumpers mount the same. 🐝
great video!!!
RT Jake Thanks! Did you see the teaser in the video?
Muy bien explicado el montaje
Gracias!
Im having a hard time putting it on..its stubborn. I cannot get the side panels in ive been at this for 3 hours
I am sorry to hear that it is giving you problems. Take a break then come back to it. Barley hang the upper front on and then slowly and evenly work the sides until you have them lined up and push them in until they click. I hope that makes sense and is helpful and you get it installed back on without any problems bud. If you have any more questions please feel free to ask.
Rivets? Where to get them?
I got mine from the local auto parts store and all the parts stores should have them. 🐝
What should I tell em tho? Im tryin to get some from amazon. Some of em looks like it but im not sure.
You can also get them off of Amazon the just need to be a 1/4 in plastic push rivet. Hopefully that helps. 🐝
Nice!
buttheadgsxr1000 Thanks!
Part 2 interesting to
Thank you so much and so glad you are enjoying the content! Once again thanks for all of your support brother!
Dope 👍
Thanks 🔥
Where's the removal bideo
I do also have the removal video on my channel and its a few back before this one. Hopefully you can find it. Thanks for watching and commenting!
ANYONE IN KC MISSOURI WHO CAN HELP ME PUT MINE ON?
Trying to remove and replace my damaged lower chin bumper is kicking my ass.
That's a bummer that it got damaged! What part of it are you having a problem with. If you have any questions let me know and I will try to help you out the best I can. Thanks for watching and commenting and best of luck buddy.
MeanBee392 I ended up getting it swapped out after wrestling with it for a few hours. If I were as thoughtful as you I’d post something about how to do it to avoid wasting a lot of time scratching my head. Your front bumper removal and installation videos were a huge help, and I’m not understating. Thanks.
That's great that you did end up getting it! That would of been a great video to do. That's awesome to hear and I am glad it was very helpful for you! You're welcome and thanks for your support!
Imma drive to ur city so you can remove and put back on my bumper, since you seem to love it so much lol jk
Hahaha! I will be in your city and we can do it then!
Check out my most resent video bro!
MeanBee392 i watched it. Been gobwring the comment button while watchin cartoons