Checking and Cleaning Motorcycle/Car fuel injector without any special tool..simplest method ever!!!

แชร์
ฝัง
  • เผยแพร่เมื่อ 2 ต.ค. 2016
  • In this video I explained working of an ideal fuel injector and how to check and clean it using a throttle body cleaner...Karizma zmr, Honda cbr250 and KTM duke 200 and 390 has probably same structure of fuel injector and can be checked and cleaned in same manner!!!
    Follow me on Instagram= / tony.blaze009
    Email:- powerpulse.remapping@gmail.com
  • ยานยนต์และพาหนะ

ความคิดเห็น • 139

  • @postaboy2001
    @postaboy2001 3 ปีที่แล้ว +27

    I suggest using a 9V battery instead of a 12-14V and also to use a “tapping” method instead of keeping constant voltage to the fuel injector. The solenoid inside can burn out if you “hold” it open. Great video nonetheless

  • @pmbari1
    @pmbari1 6 ปีที่แล้ว +14

    You could have sprayed with the potential removed to check that it is closing well. Good demo. Keep it up

  • @clivewinterbourne5822
    @clivewinterbourne5822 ปีที่แล้ว +2

    really simple to understand and will help me to diagnose my non start issue... great useful video!

  • @NealePackhams
    @NealePackhams 3 ปีที่แล้ว +5

    Great this helped alot :), although award for the most abrupt ending.

  • @MrAwesomenesh
    @MrAwesomenesh 4 ปีที่แล้ว +7

    This is awesome! This may save me from having to remove the fuel rails and injectors (I know all 4 seem to be firing, but seem to be possibly working at reduced capacity). I have 2 sets of injectors, too (CBR600RR). Thanks for doing this video!

  • @gmindgjerd
    @gmindgjerd 5 ปีที่แล้ว +1

    Good one. Very helpful. Thank you brother.

  • @juliosilva603
    @juliosilva603 3 ปีที่แล้ว

    Great, Simple and clear explanation

  • @JamesDimon
    @JamesDimon ปีที่แล้ว +1

    So easy. Nice work!

  • @Danger_mouse
    @Danger_mouse 5 ปีที่แล้ว +8

    Good, but you should use reduced voltage, like 9v or less. The injector solenoid is not designed to be held open, rather it's made to pulse on and off, and the wiring of the coil can be damaged with full 12v

    • @powerpulse.motorsports
      @powerpulse.motorsports  5 ปีที่แล้ว +1

      Well at high RPMs injector is practically open all the time so no worry..!!

    • @Danger_mouse
      @Danger_mouse 5 ปีที่แล้ว +11

      @@powerpulse.motorsports
      At high rpm, the injector should never reach more than 90% duty cycle, and, it also has a large amount of cool fuel flowing through it to cool it down.
      The preferred voltage for cleaning is not more than 9v.
      I have seen several injectors damaged by using this 12v method.

    • @gmindgjerd
      @gmindgjerd 5 ปีที่แล้ว

      Thanks brother. Essential information.

  • @golperkas1674
    @golperkas1674 6 ปีที่แล้ว

    Good demonstration.

  • @rajashreep729
    @rajashreep729 6 ปีที่แล้ว +1

    Nice video bro👍

  • @TonyDeepak999
    @TonyDeepak999 5 ปีที่แล้ว

    My zmr's fuel injector body has a crack . Do I have to change the fuel injector or just the body. Pls reply

  • @pulsarloverCG2444
    @pulsarloverCG2444 5 ปีที่แล้ว

    Can we connect battery Negative and positive charge terminals to injector randomly. Does injector will work or it blow off ?? Please do reply

  • @silkyg3400
    @silkyg3400 4 ปีที่แล้ว

    Thanks for info helpful video!

  • @AmrutKatigar
    @AmrutKatigar 2 ปีที่แล้ว

    You so cool explaining all toughy toughy shit. Thank you

  • @JamesBond-ly9zz
    @JamesBond-ly9zz 3 ปีที่แล้ว

    Will this trick work on 17 camaro ss. Direct injection injectors ?

  • @sunilghorpade1682
    @sunilghorpade1682 6 ปีที่แล้ว +1

    Nice one

  • @BillyBeatbox_BdaBX
    @BillyBeatbox_BdaBX 4 ปีที่แล้ว

    How much current for the selenoid to work?

  • @gmindgjerd
    @gmindgjerd 5 ปีที่แล้ว +1

    Mine wont keep running. Need to try this. Thanks.

  • @romanlao
    @romanlao 4 ปีที่แล้ว

    thanks for video bro

  • @CG07biker
    @CG07biker 6 ปีที่แล้ว +1

    Sir mere pass herohonda Karizma zmr h 2011 model meri bike mein missing problem aa rhi hai or agar headlight on karne se bahut jayada missing karti h bike or agar speed chalao toh bike normal chalti h pr agar pickup Dena ho speed up karne ke liye to bike missing Karti h or bike ka jo rpm mitor h vo bike start hone ke bad Kam jyada hote rehta h or kabhi kabhi engine start karne mein bhi problem aa rhi h please koi solution de bahut pareshan ho gya hu sir

  • @mikebills9343
    @mikebills9343 4 ปีที่แล้ว +1

    Thanks for that

  • @hacker6695
    @hacker6695 5 ปีที่แล้ว

    Can you please show how to remove Injector from Karizma zmr Bike? 🤔

  • @Starboys714
    @Starboys714 5 ปีที่แล้ว +2

    thanks

  • @MohsinKhan-td4xv
    @MohsinKhan-td4xv 5 ปีที่แล้ว +1

    thakns

  • @Mdbikeservice
    @Mdbikeservice 9 หลายเดือนก่อน

    Nice video 👍

  • @israr47
    @israr47 4 ปีที่แล้ว

    Bhai fuel injection cleaning kitne time me karana chahiye

  • @litonhossain5990
    @litonhossain5990 5 ปีที่แล้ว +1

    nice

  • @clube_da_7_galo
    @clube_da_7_galo 3 ปีที่แล้ว +1

    very nice.

  • @MrSaralgupta
    @MrSaralgupta 6 ปีที่แล้ว +1

    Nice video! Do you recommend any cleaning solution that we can mix with petrol ? I heard someone saying liqui Moli can be used with petrol...

  • @rjbjazz1708
    @rjbjazz1708 5 ปีที่แล้ว

    can you plzz help me i have buy injector holder karizma zmr 2011 model

  • @javedkhan.17
    @javedkhan.17 5 ปีที่แล้ว

    My cbr 150 is giving very low milegae of 20 kmpl what should i do

  • @cymarmotovlog64
    @cymarmotovlog64 3 ปีที่แล้ว +1

    Owesome

  • @tinkupal4747
    @tinkupal4747 6 ปีที่แล้ว

    very nice

  • @Arboc00
    @Arboc00 5 ปีที่แล้ว

    how would you flush the injector to remove the residual the carb cleaning solution after youve finished cleaning? Is there a way to flush the system with petrol without using an aerosol can?

    • @adityanaik7886
      @adityanaik7886 4 ปีที่แล้ว

      Alvin Sidhu no need to remove it as it is volatile and even if it stays in there it burns without any residue so it is safe

  • @digeshwarbhai.....8288
    @digeshwarbhai.....8288 3 ปีที่แล้ว

    Very finest 👍👍

  • @ananddigitalstudio8933
    @ananddigitalstudio8933 6 ปีที่แล้ว

    nic trick

  • @prabuprasathprabuprasath9937
    @prabuprasathprabuprasath9937 4 ปีที่แล้ว

    Lovely

  • @deviniscool13
    @deviniscool13 6 ปีที่แล้ว +2

    Can you please tell me what other type of battery would work? Like a 9volt or my motorcycle battery?

    • @powerpulse.motorsports
      @powerpulse.motorsports  6 ปีที่แล้ว +1

      A motorcycle battery wud do just fine...I used 12v DC adapter from modem..!!

    • @willieanabeza7120
      @willieanabeza7120 4 ปีที่แล้ว

      How will I now the polarity of both terminal before I do this. In event of wrong polarity what will happen to the injector?

  • @digeshwarbhai.....8288
    @digeshwarbhai.....8288 3 ปีที่แล้ว

    Sir fuel injector ki sahi ret kya hai please reply 🙏🙏

  • @salmanmanhas9895
    @salmanmanhas9895 6 ปีที่แล้ว

    I Dont have a choke cleaner where do i find it

  • @yyyyy9362
    @yyyyy9362 2 ปีที่แล้ว

    Enzektr germ horha he tho kya vo khrab he kya petrol nhi dereha he

  • @janethhaputhanthiri9816
    @janethhaputhanthiri9816 3 ปีที่แล้ว

    Please explain how to remove injector line honda little cub efi bike

  • @kripalsingh07
    @kripalsingh07 5 ปีที่แล้ว

    Nice

  • @AkashDeep-zy7je
    @AkashDeep-zy7je ปีที่แล้ว

    Hello Sir Namesty ! Every Engineer Doing this type of Activity ! My Zmr bike Fuel Pump Is Also Burnout ! And Hero company Say 14500 Rs Charging for Me This Dame fuel Pump ! Sir I am Also A Automobile Technician !

  • @zameereesaguttikonda
    @zameereesaguttikonda 3 ปีที่แล้ว +2

    How to know (+, -) in injector clip?

  • @pawanlondhe8257
    @pawanlondhe8257 6 ปีที่แล้ว

    I have Honda CB unicorn 150cc can I use fuel injector in by bike..??

    • @powerpulse.motorsports
      @powerpulse.motorsports  6 ปีที่แล้ว +2

      U need fuel pump, fuel injector, MAF sensor, Air intake temp sensor, Throttle plate angle sensor, Oil temp sensor, O2 sensor, ECU, ECU remapping tool, throttle body for installing a Fuel injection system....So I suggest keep it carbureted..!!!!
      Crank Position sensor is already in der which controls ignition and injection timing while rest of the sensors control the injection volume to keep Air/Fuel ratio 14.7:1...!!!

  • @apoorvmathur6758
    @apoorvmathur6758 6 ปีที่แล้ว

    Buddy what you used for electric supply? Is this bike battery connected over there or what else ..i doubt there might be some limited current supply is required so just wanted to know what you did ? Where this wires were connected
    And thank you soo much you are helpfull
    😊

    • @powerpulse.motorsports
      @powerpulse.motorsports  6 ปีที่แล้ว

      A laptop battery supply was used to activate injector..!!

    • @ricky_ph9774
      @ricky_ph9774 4 ปีที่แล้ว

      @@powerpulse.motorsports isnt laptop battery ranges 11 to 15v maybe? What is the voltage on your Injector?

  • @robbertpopke2349
    @robbertpopke2349 4 ปีที่แล้ว

    I changed a new injector but it starts and after 5 seconds it just stops turn off the ignition off and turn it on again it starts and stops after 5 seconds again what could be the problem 🙏

  • @govinddas1976
    @govinddas1976 3 ปีที่แล้ว

    Bhai fuel vale me current nahi aa raha hai kya problem hoga

  • @nihalshikalgar4806
    @nihalshikalgar4806 6 ปีที่แล้ว

    Can this fuel injectors give constant spray of fuel for a minute or more

  • @SahilKhan-ut9jx
    @SahilKhan-ut9jx 5 ปีที่แล้ว

    please tell me this item price

  • @amitkamble9485
    @amitkamble9485 6 ปีที่แล้ว

    Which Is got For Maintaince Fi or carburetor bike
    Does Fi repair is Costly

    • @powerpulse.motorsports
      @powerpulse.motorsports  6 ปีที่แล้ว +1

      Fuel Injection maintenance is low...Fuel injectors and throttle body has to be cleaned after 20000kms whereas carb has to be cleaned @ 3000kms interval...
      But injection system repair is high...cuz Programmed injection system has Sensors,Fuel pump,Ecu and fuel injector...So components are costly...But maintenance is almost zero..!!!

  • @zameereesaguttikonda
    @zameereesaguttikonda 3 ปีที่แล้ว +1

    How did yiu remove the hard rubber pipe from the fuel injector?

    • @Sam-to1zg
      @Sam-to1zg 3 ปีที่แล้ว

      It has locks, Just press with two fingers while taking it out slowly. Do not pull hard.

  • @AmrutKatigar
    @AmrutKatigar 2 ปีที่แล้ว

    Heard that for KTM Duke it should be 9v. What happens if I clean using 12v dc?

    • @julian23561
      @julian23561 ปีที่แล้ว

      stick to the safe side and just use 9V instead, and hook your wires up to a button switch so the injector isn't receiving voltage constantly to prevent damage. FIs are relatively cheap and easy to replace but I'd rather not replace it if its working in the first place.

  • @ajayjagannathan9568
    @ajayjagannathan9568 2 ปีที่แล้ว

    Which ap btry

  • @SuperShivani
    @SuperShivani 6 ปีที่แล้ว

    From where we can get this connecting manifold ? Please share the link

    • @powerpulse.motorsports
      @powerpulse.motorsports  6 ปีที่แล้ว

      If your bike doesn't have this manifold use following technique..!!
      th-cam.com/video/uERM5W0BOqY/w-d-xo.html

  • @nagarkarchinmay2812
    @nagarkarchinmay2812 10 หลายเดือนก่อน

    Make video how to.install it

  • @rjbjazz1708
    @rjbjazz1708 5 ปีที่แล้ว

    i need a injector holder

  • @taturace150
    @taturace150 5 ปีที่แล้ว +1

    how long time injector can keep charged open before coil burn ?

    • @powerpulse.motorsports
      @powerpulse.motorsports  5 ปีที่แล้ว +3

      There's no time limitation I guess...Cuz at high RPMs it's practically always open!!

    • @taturace150
      @taturace150 5 ปีที่แล้ว

      really, i was listen, somebody saying, the injector goes mute. but i think was a prank for me

  • @govinddas1976
    @govinddas1976 3 ปีที่แล้ว

    Wiring sahi hai

  • @amt9579
    @amt9579 5 ปีที่แล้ว

    How many voltages can be used bro
    I have honda wave 125 I.
    Pls reply..

  • @Anky_2825
    @Anky_2825 4 ปีที่แล้ว +1

    When to clean fuel injector of bike?

  • @Techlite852
    @Techlite852 3 ปีที่แล้ว

    Fuel injector cleaner chemical ka link to diya nahi

  • @illiterate_no.1
    @illiterate_no.1 3 ปีที่แล้ว

    Your voice similar to english maker

  • @cellwood2296
    @cellwood2296 5 ปีที่แล้ว

    what motorcycle is this from please

  • @venkatesanvenkatesan4110
    @venkatesanvenkatesan4110 ปีที่แล้ว

    Price pleasure+ bs6 scooty

  • @user-ro7eu2th1p
    @user-ro7eu2th1p 5 ปีที่แล้ว

    Sir meri bike v chalu ne ho re h ky problum ho sakta h batiye mere pass cbr 250r h

    • @powerpulse.motorsports
      @powerpulse.motorsports  5 ปีที่แล้ว

      Cud be a bad fuel pump or injector or just a bad pump relay...Also make sure to check your spark plug and all the fuses!!

    • @user-ro7eu2th1p
      @user-ro7eu2th1p 5 ปีที่แล้ว

      Spark plug chng krnapadega ky sir

    • @user-ro7eu2th1p
      @user-ro7eu2th1p 5 ปีที่แล้ว

      Engin problum thodi na h sir

  • @theshiva1991
    @theshiva1991 5 ปีที่แล้ว

    Plusar 220 fi, fuel injection issue. Reply with your contact.

    • @elyasseliya4113
      @elyasseliya4113 5 ปีที่แล้ว

      Sir what problem do you have with your fuel injector

  • @jasonwojcicki3667
    @jasonwojcicki3667 ปีที่แล้ว

    Why not test it connected to the bike

  • @NOOBGAMING-tl1ld
    @NOOBGAMING-tl1ld 5 ปีที่แล้ว

    My bike Karizma ZMR starting problem

    • @mike_r4150
      @mike_r4150 5 ปีที่แล้ว

      The Karizma ZMR is your problem.

  • @AutomateX
    @AutomateX 7 ปีที่แล้ว

    can wd 40 be used for it?

    • @powerpulse.motorsports
      @powerpulse.motorsports  7 ปีที่แล้ว +2

      Umm WD 40 is more like a lubricant...It won't clean as it doesn't have much pressure!!

  • @user-ro7eu2th1p
    @user-ro7eu2th1p 5 ปีที่แล้ว

    Pls sir

  • @sujitrajput7373
    @sujitrajput7373 5 ปีที่แล้ว

    Bhai kitne this

  • @salmanmanhas9895
    @salmanmanhas9895 6 ปีที่แล้ว

    My injector is not working as Petrol is not coming out what should I do

    • @powerpulse.motorsports
      @powerpulse.motorsports  6 ปีที่แล้ว

      Genuine NEW motorcycle motor fuel injector yellow color 12 holes senin for CBR600RA CBR600RR CBR600 16450-MFJ-D01
      s.aliexpress.com/NBZzMzMJ?fromSns=Copy to Clipboard

    • @NEERAJ9009
      @NEERAJ9009 6 ปีที่แล้ว

      Clean it and it will start working

    • @salmanmanhas9895
      @salmanmanhas9895 6 ปีที่แล้ว +1

      Nrsonkar Sonkar replaced

    • @salmanmanhas9895
      @salmanmanhas9895 6 ปีที่แล้ว

      Now again bike is not starting its cranking but not starting even rpm is not working while i press the self

    • @NEERAJ9009
      @NEERAJ9009 6 ปีที่แล้ว

      When did you change the fuel inje?

  • @razaraza244
    @razaraza244 4 ปีที่แล้ว

    Battery se - + nahi hota Hai

  • @Makhanike1985
    @Makhanike1985 3 ปีที่แล้ว

    सर हिंदी में जानकारी चाहिए

  • @suryalk1457
    @suryalk1457 4 ปีที่แล้ว

    Aapke pas injectar mile ga

    • @rosnisharma7292
      @rosnisharma7292 3 ปีที่แล้ว

      Ji m sale karta hu injector price 3500 h mera no h 8510852697

  • @RohitSingh-ji5on
    @RohitSingh-ji5on 4 ปีที่แล้ว

    Sir plzz talk hindi

  • @baper2696
    @baper2696 3 ปีที่แล้ว

    so why this video in my recomendation.. so wierd. so so wierd

  • @davemarkdulong220
    @davemarkdulong220 5 ปีที่แล้ว

    You speak to fast

    • @keirekcharm
      @keirekcharm 4 ปีที่แล้ว

      dave mark dulong you listen too slow.

  • @tinkupal4747
    @tinkupal4747 6 ปีที่แล้ว

    very nice