Hey there, I got one of these for free and am planning to use it for a desk tech setup. I'm going to be plugging in my PC, a couple monitors, a 3D Printer, and some other USB things into it. Which ports (High-current vs linear filtration) should I use for each of those devices? Will a 3D printer, high-end gaming PC, and monitors need to be plugged into the high-current side or should I put them in the linear filtration? Is it worth using this device for a basic tech setup? Thanks!
I think it is a wise move to use a power conditioner whenever you want to both protect and optimize your setups. The high-current outlets are designed for audio amplifiers and gear that needs strong power supply for best performance. Without any detailed specifications on your exact gear, I won't be able to determine if they require connection to those outlets. I think you can choose any combination for your setup and get great results.
Hi Otávio , both great units! The 4300 does add a couple more connections; but really sets itself apart with even better noise isolation and filtration. From there, it also adds the front-panel digital voltmeter and two rotatable front-panel lamps to illuminate an equipment rack.
Hello, I have a Panamax MR4300 which I plugged into the outlets in my apartment. The red triangular warning ⚠️ lights come on. I am guessing that the tv and other equipment didn’t come on is due a problem in the wiring in the apartment ? The voltage light is reading 121. Even with this does that also mean that non of the equipment will come on till the wiring issue is check? Thank you William
Hi William, you likely won't be able to use any of the equipment connected to your MR4300 until the voltage issues are resolved. When this unit senses an unsafe power condition, it automatically disconnects power from your equipment to protect it from damage. If you got the unit here, you can call our Tech Support as well Their direct number is on your invoice.
Which power conditioner would you recommend for a home audio setup, Yamaha CD Player, Auralic Taurus MK2 Headphone Amp/Pre-Amp, Cambridge Audio DAC and I still have to add my power amp and maybe a turntable. Not sure what else I’ll add in the future. I’m located in New Zealand.
Hi Mornay, thanks for reaching out. I'm sorry to tell you we don't have a compatible power protection match for you there in New Zealand since all of our units are specific to the USA 110 volts standard.
I had a recent surge and now the unsafe voltage light is turned on. How do I reboot the Panamax so that electronics plugged into the unit can be restarted?
For this model, when voltage returns to a safe level, power to the equipment should be automatically reconnected. If you got the unit here, please call our Tech Support. Their direct number is on your invoice.
Hi, very nice video. Thank you. I have connected to my MR4300 a receiver Anthem MRX 740, and when the voltage goes down, my reciver turns off by itself, then i need to manually turn on manually. Is there a way to stop this behavior?
What are you using as your power protection device currently? Are you seeing voltage drop on the front panel of your unit with a voltmeter like on the Panamax MR4300? These units condition and regulate power, but if you are seeing voltage drops low enough to turn off your gear there could be a deeper issue.
@@crutchfield Im using the MR42300 and my receiver its plugged to the Bank 2, so, and yes, its dropping to 108 - 109 for moments, you think this behavior, powering off by it self is not common?
It is designed to turn the equipment off if the voltage drops or surges too high. But it should turn everything back on once the voltage returns to a safe level. You should be seeing the red lightning bolt on the Panamax MR4300 when this happens and it's best to wait for the automatic reconnection if you can.
If the red “Line Fault Indicator” is on because my outlet is only 2-prong, is that ok to run my equipment until I can get my electrician in to upgrade it to a 3-prong grounded outlet?
Can I plug on my hi fi equipment and safely power everything off and on with the switch in this device ? I would prefer to use and on off switch for the entire system rather than use the dials on my old amps.
It is ok to use this units power button to turn on/off all the gear that is connected to it as long as that gear will turn on once they get power again and there are enough proper outlets for your gear.
The number being shown is supposed to be the incoming voltage available. If that number never changes, then its likely some part of the units electronics have been damaged making it display 125 volts instead of the true voltage and a repair of the unit is needed to fix it.
You definitely want a properly grounded outlet to connect a unit like this one. That is typically done using a grounding rod sunk into the ground but there are other ways to do it. If your home is not properly grounded, we recommend consulting a electrician for help.
Hey there! We're great, thanks for asking! I hope you're doing well too! Yes, you can plug your PlayStation 5 into this surge protector to protect it from power spikes as well as the minor day-to-day current fluctuations.
So, this will replace my 20yr old monster surge protector? I know over time things wear out however, my left floor speaker always has a little buzzzing sound coming for it even with and without my 3-channel amp hooked to it. Does this also have lifetime warranty if there is a lightning strike and it somehow doesn't work and all my stuff gets fried?
This can replace other surge protectors and get you back to having joules of protection against surges along with filtering out noise on the powerline. It is covered by a 3 year parts and labor warranty, and has Panamax's $5,000,000 Lifetime Connected Equipment Warranty. Details on this connected equipment warranty can be found in the owner's manual and we keep a copy online with the link to download it found in the What's in the Box section of its webpage: www.crutchfield.com/I-rYALc227/p_299MR4300/item.html
@@crutchfield Thank! Well yes.. I put in a request to your special team that works with wall treatments and nobody got back to me.. Called 2x last week and still no return call or email from anyone. Please advise... I even uploaded a lot of photos of my room..
Hey Scotty. I'd like to look into what has happened here - can you send us a private message your name, email address, and phone number? - Jeff K, Online Community Manager
Hello. I really need help with my Panamax and entertainment system. It keeps shutting off and won’t stay on. It started happening more often to where it hardly stays on now. Help please?
The Panamax MR4300 is designed to work with 120V AC at 50/60HZ. It features an undervoltage shut off feature that kicks in if the voltage drops to 95V (+/- 3V).
It is sacrificial, meaning that it's protection is finite. It has protect or disconnect circuitry that will cut power to the connected device in the case of a catastrophic surge or spike.
This does not have an outlet for such a device but could protect it on one of the high current outlets as long as the fireplace does not cause it to exceed the 15A maximum limit it can support
The price varies depending on if there is a sale on it or not. We don't have a way to make any price posted here change with the sales but we always keep the web site updated for it: www.crutchfield.com/I-rYTVc227/p_299MR4300/item.html
Sometimes my lights flicker in my room. Does this also do automatic voltage regulation like a UPS does? I'm trying to decide on if I should rather get a UPS or something like this for a high-power PC and a smaller guitar amp
This model does not regulate the voltage. Some can and the step-up version of this one, the M5400-PM model, will regulate the voltage. The M5400-PM can be found here: www.crutchfield.com/I-rYALc227/p_299M5400PM/item.html
Without real measurements from an EMI Dirty Electricity Meter in mV, this review is worthless and is just based on personal opinion. Cleaning up "dirty electric" is usually negligible to zero in the vast majority of so-called power conditioners. I have an expensive Furman PL-PLUS DMC Power Conditioner and the dirty electric signal in my wall outlet is 56 mV and any outlet on the Furman itself is worse at 160 mV. So yeah, according to my Greenwave EMI Dirty Electricity Meter, the Furman is NOT cleaning up the dirty electricity and actually making it worse!
I agree with you. Most of these are expensive snake oil. I have an older house that I have converted the back room into a studio as I am a singer songwriter and guitar player. I use a few powered p.a. speakers and a 1500 watt guitar amp with a voice live 3 extreme a helix system with a feedback destroyer. Had a bad hiss at over %50 gain. Bought 4 different power conditioners and they All increased noise. Ended up getting a transformer with filters and sine wave correction then ran new ground separated from neutral line with new wiring outlets and beaker station and finally fixed the dreaded hiss.
The way you give explanations on the product details encourages me to learn more about the functional roles of each audio component.
I got one of these, great unit!
Is there a limit in how much voltage can be used?
The maximum current that it supports is 15A total for all its ports combined together
It’s gorgeous. Probably will get one next year for my stereo system
Gorgeous piece
Hey there, I got one of these for free and am planning to use it for a desk tech setup. I'm going to be plugging in my PC, a couple monitors, a 3D Printer, and some other USB things into it.
Which ports (High-current vs linear filtration) should I use for each of those devices? Will a 3D printer, high-end gaming PC, and monitors need to be plugged into the high-current side or should I put them in the linear filtration?
Is it worth using this device for a basic tech setup?
Thanks!
I think it is a wise move to use a power conditioner whenever you want to both protect and optimize your setups. The high-current outlets are designed for audio amplifiers and gear that needs strong power supply for best performance. Without any detailed specifications on your exact gear, I won't be able to determine if they require connection to those outlets. I think you can choose any combination for your setup and get great results.
Ok, thank you!
Anytime! 🙂
Great video! What are the main differences between the MR4000 and MR4300? When the 4300 is advised over the 4000? Thanks!
Hi Otávio , both great units! The 4300 does add a couple more connections; but really sets itself apart with even better noise isolation and filtration. From there, it also adds the front-panel digital voltmeter and two rotatable front-panel lamps to illuminate an equipment rack.
Hello, I have a Panamax MR4300 which I plugged into the outlets in my apartment. The red triangular warning ⚠️ lights come on. I am guessing that the tv and other equipment didn’t come on is due a problem in the wiring in the apartment ? The voltage light is reading 121. Even with this does that also mean that non of the equipment will come on till the wiring issue is check?
Thank you William
Hi William, you likely won't be able to use any of the equipment connected to your MR4300 until the voltage issues are resolved. When this unit senses an unsafe power condition, it automatically disconnects power from your equipment to protect it from damage. If you got the unit here, you can call our Tech Support as well Their direct number is on your invoice.
Which power conditioner would you recommend for a home audio setup, Yamaha CD Player, Auralic Taurus MK2 Headphone Amp/Pre-Amp, Cambridge Audio DAC and I still have to add my power amp and maybe a turntable. Not sure what else I’ll add in the future. I’m located in New Zealand.
Hi Mornay, thanks for reaching out. I'm sorry to tell you we don't have a compatible power protection match for you there in New Zealand since all of our units are specific to the USA 110 volts standard.
I had a recent surge and now the unsafe voltage light is turned on. How do I reboot the Panamax so that electronics plugged into the unit can be restarted?
For this model, when voltage returns to a safe level, power to the equipment should be automatically reconnected. If you got the unit here, please call our Tech Support. Their direct number is on your invoice.
Hi, very nice video. Thank you. I have connected to my MR4300 a receiver Anthem MRX 740, and when the voltage goes down, my reciver turns off by itself, then i need to manually turn on manually. Is there a way to stop this behavior?
What are you using as your power protection device currently? Are you seeing voltage drop on the front panel of your unit with a voltmeter like on the Panamax MR4300? These units condition and regulate power, but if you are seeing voltage drops low enough to turn off your gear there could be a deeper issue.
@@crutchfield Im using the MR42300 and my receiver its plugged to the Bank 2, so, and yes, its dropping to 108 - 109 for moments, you think this behavior, powering off by it self is not common?
It is designed to turn the equipment off if the voltage drops or surges too high. But it should turn everything back on once the voltage returns to a safe level. You should be seeing the red lightning bolt on the Panamax MR4300 when this happens and it's best to wait for the automatic reconnection if you can.
If the red “Line Fault Indicator” is on because my outlet is only 2-prong, is that ok to run my equipment until I can get my electrician in to upgrade it to a 3-prong grounded outlet?
You do want to wait and stick with the 3-prong compatible outlet.
Can this unit be used in conjunction with a UPS? Thank you.
It can be plugged into a UPS as long as the UPS can support a 15A load on the port you use.
I'm moving to Japan, can this be used on 100v?
This will not work in Japan
Can I plug on my hi fi equipment and safely power everything off and on with the switch in this device ? I would prefer to use and on off switch for the entire system rather than use the dials on my old amps.
It is ok to use this units power button to turn on/off all the gear that is connected to it as long as that gear will turn on once they get power again and there are enough proper outlets for your gear.
My Panamax M4300 lit in front says 125 volts. We had a power outage. What can I do to get rid of th 125 volt on the front of the display?
The number being shown is supposed to be the incoming voltage available. If that number never changes, then its likely some part of the units electronics have been damaged making it display 125 volts instead of the true voltage and a repair of the unit is needed to fix it.
Are you supposed to ground the protector with a ground wire to the outside 🤔 just wandering ?
You definitely want a properly grounded outlet to connect a unit like this one. That is typically done using a grounding rod sunk into the ground but there are other ways to do it. If your home is not properly grounded, we recommend consulting a electrician for help.
Anthem AVM 70 8K, XPA-6, BASX-7,BASX-3, 77 LG TV, ATV4K and 4k player. Sounds good for this MR4300 ?
This MR4300 will work with all that gear! Be sure to plug the amps into the high current banks and the rest of the gear into the other bank
Just bought the BaseX4 Amp, can I plug this and my Marantz 6011 into this unit?
Sounds like you're gearing up for some fun! Are you wanting to connect for signal from the receiver into your amp?
Hi, how are you? Can I connect a playstation 5? Is it recommended for this use? Tks
Hey there! We're great, thanks for asking! I hope you're doing well too! Yes, you can plug your PlayStation 5 into this surge protector to protect it from power spikes as well as the minor day-to-day current fluctuations.
Are you able to use the high current plugs to plug in a powered subwoofer?
A lot of powered subwoofers are able to use speaker level audio (high level audio) on its inputs. Which powered subwoofer is it?
So, this will replace my 20yr old monster surge protector? I know over time things wear out however, my left floor speaker always has a little buzzzing sound coming for it even with and without my 3-channel amp hooked to it. Does this also have lifetime warranty if there is a lightning strike and it somehow doesn't work and all my stuff gets fried?
This can replace other surge protectors and get you back to having joules of protection against surges along with filtering out noise on the powerline. It is covered by a 3 year parts and labor warranty, and has Panamax's $5,000,000 Lifetime Connected Equipment Warranty. Details on this connected equipment warranty can be found in the owner's manual and we keep a copy online with the link to download it found in the What's in the Box section of its webpage:
www.crutchfield.com/I-rYALc227/p_299MR4300/item.html
@@crutchfield Thanks! Bout this from u all the other day! I'll put the monster in the garage lol
Great choice, Scotty! Let us know how you like it and if you need anything else.
@@crutchfield Thank! Well yes.. I put in a request to your special team that works with wall treatments and nobody got back to me.. Called 2x last week and still no return call or email from anyone. Please advise... I even uploaded a lot of photos of my room..
Hey Scotty. I'd like to look into what has happened here - can you send us a private message your name, email address, and phone number? - Jeff K, Online Community Manager
Hello. I really need help with my Panamax and entertainment system. It keeps shutting off and won’t stay on. It started happening more often to where it hardly stays on now. Help please?
Hi Jona, sorry to hear this! If you got the unit here, please give our Tech Support a call to troubleshoot. Their direct number is on your invoice.
Can I use this on 20 amp outlet? I have dedicates power outlet for my home theatre.
This has a maximum current rating of 15 amps.
this unis work with a 110V input?
The Panamax MR4300 is designed to work with 120V AC at 50/60HZ. It features an undervoltage shut off feature that kicks in if the voltage drops to 95V (+/- 3V).
Is it ok to leave this unit turned on at all times?
Yes, it is ok to leave it on all the time ready!
I just ordered this from you guys last night!
Yay!!! What components will you be plugging into it?
@@crutchfield Macintosh MA252, Klipsch RP600m and SPL-100 speakers, Pro-ject Debut Carbon Esprit, and a to be determined cd player.
That's some nice gear you have in your system! If you need any help with finding a CD player to use with it, let us know.
Jays Audio are superb for CD unless you want SACD.
is this a one time use device ?
It is sacrificial, meaning that it's protection is finite. It has protect or disconnect circuitry that will cut power to the connected device in the case of a catastrophic surge or spike.
Can it protect a electric fireplace.
This does not have an outlet for such a device but could protect it on one of the high current outlets as long as the fireplace does not cause it to exceed the 15A maximum limit it can support
@@crutchfield so it would be fine on a high current outlet.
As long as it doesn't push the combined total for the connected electronics past 15A power drawl, yes.
which input do you plug-in the PS5
A device like that is best connected to the The 4 Linear Noise Filtration bank of outlets on the back or the front outlet.
...so what is the price...
The price varies depending on if there is a sale on it or not. We don't have a way to make any price posted here change with the sales but we always keep the web site updated for it:
www.crutchfield.com/I-rYTVc227/p_299MR4300/item.html
Sometimes my lights flicker in my room. Does this also do automatic voltage regulation like a UPS does? I'm trying to decide on if I should rather get a UPS or something like this for a high-power PC and a smaller guitar amp
This model does not regulate the voltage. Some can and the step-up version of this one, the M5400-PM model, will regulate the voltage. The M5400-PM can be found here:
www.crutchfield.com/I-rYALc227/p_299M5400PM/item.html
Without real measurements from an EMI Dirty Electricity Meter in mV, this review is worthless and is just based on personal opinion. Cleaning up "dirty electric" is usually negligible to zero in the vast majority of so-called power conditioners. I have an expensive Furman PL-PLUS DMC Power Conditioner and the dirty electric signal in my wall outlet is 56 mV and any outlet on the Furman itself is worse at 160 mV. So yeah, according to my Greenwave EMI Dirty Electricity Meter, the Furman is NOT cleaning up the dirty electricity and actually making it worse!
I agree with you. Most of these are expensive snake oil. I have an older house that I have converted the back room into a studio as I am a singer songwriter and guitar player. I use a few powered p.a. speakers and a 1500 watt guitar amp with a voice live 3 extreme a helix system with a feedback destroyer. Had a bad hiss at over %50 gain. Bought 4 different power conditioners and they All increased noise. Ended up getting a transformer with filters and sine wave correction then ran new ground separated from neutral line with new wiring outlets and beaker station and finally fixed the dreaded hiss.
It's not a review.
@@white.lodge.dale.cooper Ha ha... not only is it a review, it's a full feature review.