Top notch build the only thing I don’t like is the shifter I know you had to do it that way but it just looks odd and small reminds me of a shifter from a cheap driving simulator, trucks need the long shifter lol
Congratulations sir might need you to do mine soon and we rep full send east to west coast and put it next to Gabe’s at all the shows but single wheel base instead of a dully
Let's say I had an offroad only 2013 4500 cab and chassis aisin truck and I were to p pump the 6.7 and manual swap, could you help me with the computer side of things to still have a functioning truck electrical wise
@@bricetingle4345 pull the abs fuse. holding the traction control down for around 10 seconds also should disable it. chevy turns back on auto after 30mph not sure if rams does. but you can run a toggle switch fuse through youre abs and disable it for burnouts.
Will this kit be something y’all would be adding to your store for sale? I have a 2019 Ram 2500 Laramie with the same console that I would love to G56 swap.
Looking into g56 swapping my 20 2500 I have everything from a 4th gen except trans so spring I’ll be doing it. do I have to do a module or will I be able to start the truck with out it? And wire in neutral safety switch and all the basics things my self. Like swapping an older truck?
If I brought you a brand new 5th gen 4wd, what's your approximate cost of doing something like this, labor and parts and all? Converting it to a manual
@Full Send Diesel how Much am I looking at to build my 4th gen 2500 6.7 for 700-1000 hp??? Not worried about wheels and tires or lift or anything like that ! Mainly engine and trans Mods and exhaust and trac bars
@@Kevin_fullsenddiesel sounds goods I'll start savings where you locateds? I work 2 jobs and a lot of side jobs so I'm hoping I can get it done within a yr
Yes/no. We will do swaps in house with our module but it’s not at the point where we can just sell it online, it’s extremely intricate and hasn’t been tested on multiple models etc
Cool deal, ill be following along for my 21 4500. Apart from that would you have any interest in developing a tcm like this for a TRX? Im building a salvage trx from scratch and will be putting a tr6060 with a t case conversion in it. Until i saw this i assumed i would have to use an aftermarket ecu and harness and throw all the factory features out the window. If i bring the truck to you with the physical swap done could/would you be interested in doing a tcm like this for it?
The giveaway truck would mean the world to me I totaled my last truck do to black ice and I’ve been without a truck and being able to go to work and everything else for the past month
I wanted to come by and congratulate you on a great build on Gabe's truck. You do very nice work.
Top notch build the only thing I don’t like is the shifter I know you had to do it that way but it just looks odd and small reminds me of a shifter from a cheap driving simulator, trucks need the long shifter lol
Been waiting on the update video for this. Slowly pushing your stuff on my customers when the situation makes sense.
Absolutely amazing! You really killed it 💪🏻👌🏻
Congratulations sir might need you to do mine soon and we rep full send east to west coast and put it next to Gabe’s at all the shows but single wheel base instead of a dully
That’s a luxury G56 Swap! Better than factory.
That’s a clean “RAM” grill. Is it custom? How about one for a 3rd Gen?
Awesome truck, any particular reason you went with the G56 and not the beefier NV5600?
Id say it was gabes preference
Giveaway truck video coming out soon???
Fully functioning even though it has had to be towed at least twice already
Let's say I had an offroad only 2013 4500 cab and chassis aisin truck and I were to p pump the 6.7 and manual swap, could you help me with the computer side of things to still have a functioning truck electrical wise
Are those capless wheels? The drip is real.
Now that you have done it, how long would it take if you were to do another one?
Not very long hahah
That module that completely bypasses traction control and stabiltrac is that something that can be bought through you guys?
Unfortunately no, it’s strictly inside of our module
@@Kevin_fullsenddiesel damn I’m trying to have fun in 2wd and stabiltrac hates it
@@bricetingle4345 pull the abs fuse. holding the traction control down for around 10 seconds also should disable it. chevy turns back on auto after 30mph not sure if rams does. but you can run a toggle switch fuse through youre abs and disable it for burnouts.
Looking into g56 swapping my 20 2500 do I have to do a module or will I be able to start the truck with out it?
Question....do yall have a conversion kit yall sale?
We do not sorry! This was more of a one off custom build
Omg 😍😍😍 I love it came out so nice
can someone tell me the price for a fully custom truck like this?
Will this kit be something y’all would be adding to your store for sale? I have a 2019 Ram 2500 Laramie with the same console that I would love to G56 swap.
Looking into g56 swapping my 20 2500 I have everything from a 4th gen except trans so spring I’ll be doing it. do I have to do a module or will I be able to start the truck with out it? And wire in neutral safety switch and all the basics things my self. Like swapping an older truck?
If it’s an AS69RC truck you are screwed, if it’s a 68rfe truck with some tuning and a few wires you can get it to drive
@@Kevin_fullsenddieselsounds like I can easily use my high out put asin truck would need use the so 68rfe truck
You’re very intelligent and talent. Congratulations bro I’m sure this will open many doors for you if it hasn’t already 🫡🤘🏼
Will you be offering this as a service? I would buy a 5th gen if I knew I could swap it.
If I brought you a brand new 5th gen 4wd, what's your approximate cost of doing something like this, labor and parts and all? Converting it to a manual
Since the tc is bypassed is there a light on
Prolly programmed around that issue
Noop no lights at all that’s the whole thing
@Full Send Diesel thats sick,I have a 2019 ram2500 I have the kill switch that taps into the abs. It's from a guy on yt makes em
Love the truck you did an amazing job
I'd like to see that 6 speed in a Ford Raptor R!
@Full Send Diesel how
Much am I looking at to build my 4th gen 2500 6.7 for 700-1000 hp??? Not worried about wheels and tires or lift or anything like that ! Mainly engine and trans Mods and exhaust and trac bars
25k ish
@@Kevin_fullsenddiesel sounds goods I'll start savings where you locateds? I work 2 jobs and a lot of side jobs so I'm hoping I can get it done within a yr
That is insane 🤟🏻
How much would a g56 swap cost on a 2500 Cummins
Will the module be made available for purchase? If so when/how much?
Yes/no. We will do swaps in house with our module but it’s not at the point where we can just sell it online, it’s extremely intricate and hasn’t been tested on multiple models etc
Cool deal, ill be following along for my 21 4500.
Apart from that would you have any interest in developing a tcm like this for a TRX?
Im building a salvage trx from scratch and will be putting a tr6060 with a t case conversion in it. Until i saw this i assumed i would have to use an aftermarket ecu and harness and throw all the factory features out the window. If i bring the truck to you with the physical swap done could/would you be interested in doing a tcm like this for it?
Did whistlediesel buy it yet lol
you guys like blakes new version of this truck?
okay but fr,who fkin knows where he got that ram grill from?
Great Work..
So cool!
nice work!
love the videos bro wish u would post more but i get u workin💪
i put the wrong number so when i win the truck chjange the 3 at the end to a 2 lol thx
Tryin man! Soon!
Fuck yeah, I honestly like your 3rd gen better tho, his rips tho, it is the first g56 swapped 5th gen, yessah!
And another thing, you honestly shouldnt give away the 3rd gen!😭😭
That red beauty will be mine!
I have the same dipsticks in my 4th gen ….
love those Trucks
That truck needs a semi shifter 🔥
I wish i could meet you guyz
The giveaway truck would mean the world to me I totaled my last truck do to black ice and I’ve been without a truck and being able to go to work and everything else for the past month
but love the Red more
What’s cash price on red truck give away something else !
🔥🔥🔥
🔥🔥🔥😩😩💯💯
uh oh it broke
I fuckin made it
😂
i love everything about this truck except those god awful wheels. i maybe old school, but that poke look ruins any truck.
Would be more impressive if it wasnt for the dirty tunes..
It’s a manual swapped truck with an s400 with stock fuel & 38’s 😂 that’s like asking for good fuel mileage too😂
@@Kevin_fullsenddiesel 😂 the mpg would go up if you had less fuel making it out the exhaust pipe in black clouds 😂
Yo got 5000 cash in hand for this bad boy