Removing a driver's side rear door handle for those of you who want to replace the handle or any of its assemblies. This video can also supplement window motors and other installs. Thanks for watching!
Dude, I want you to know how much you and your channel are appreciated! The quality of instruction along with the positive attitude is just awesome! Thank you!
@@GXBOB of course but I once accused my daughter of breaking the window regulator bu shoving a dollar bill in the window. Turns out it was just bad. Now I just keep my mouth shut and fix it.
I’m a senior experienced Mechanic and been doing it many years and I got to say very good job breaking it all down and showing and explaining each step so that even someone who has no experience working on cars could pull this one off. That’s not as easy as it sounds to be able to explain something that way 😊
Bob, just wanted to thank you for the great video. My girls have managed to break both rear exterior door handles over the last 2 years. The first was repaired under warranty but this one was all me and the dealership wanted over $600 to replace it. (Plus a $180 diagnostic fee! Just to look at the broken handle!) Following your video and ordering a new handle online I finished the job in about 30 minutes and for less than $50. I really appreciate your insight and help! Thanks again.
By far the most concise, clear instructional video for this type of job that I've come across. I don't even own a GX (was looking for instructions to replace handles on a 4Runner) but your incredibly detailed video is a real joy to behold!
Thanks a lot! My lil 3 yr old demon hung with all his weight on the handle and broke it. $100 bucks at the dealership and this sweet tutorial put my sweet GX back in business.
Thanks Bob! Knocked it out super easy due to this video. That window seal piece that you took off the door to put back in first was a PITA to get off of my door card.
Hi Bob, Thank you so much for the video. It allowed me to do this today in just 30 minutes, which allowed me to spend the rest of my day with my family.
BOB! Thank you SO much for this video. I’ve been holding off and doing this for my wife’s car because some other videos made it look harder than it actually was. If I had followed your instructions for removing the seal the first time it would have been even easier. The instructions were detailed and very helpful. I was also very impressed with the quality of the car compared to our old Escalade. God bless!
Lol...I knew it. Love the messed up license plates too. Last week it was....I think..4SKIN. This week...we'll just have to watch the vid. Next week???? Greatest Gx460 channel on the Tube. Thanks Bob.
Awesome just Awesome 👌 I don't know what to say You are #1 in the world Just Awesome special (Tank you very much) Bottom of my heart for All your (Quality videos) You help us a lot we save Lots of money 💰 🤑 💸 ✌👌🖐🤘👋👍🙏🙏🙏 God bless you and your family 👪 🙏 ❤ 😊🍷🍷🍻🎄🎆🎵🔊🎶🎶 Merry Christmas happy holiday and happy new year 👋 Bye Bye 👋 🗽⛪
I watched this video 6 months ago and then bought a handle and sat on the project. I was thinking there is no way it's this straightforward, something always goes wrong, is left out of the video, whatever. Nope, totally went fine. Bob, awesome videos! Thank you so much. I was quoted a couple hundred dollars in labor per handle to replace. Happy to say I won't be paying that.
Great video! My 7 year old broke this handle this morning and I was dreading what this process was going to be to replace it. You give such clear and easy to follow instructions that it should be a breeze. Thank you Bob!!
This was super helpful! The trim off before panel on saved frustration. It would have saved more if I had watched the video all the way through first 😂
Thanks Sparky, i try my best to pass on as many lessons learned as i can. If you have better shortcuts, feel free to add it onto the comments as others tend to read them too.
Great video! Dealer charges $210 to do this. $68 for labor and $142 for the door handle. Both my wife’s rear doors handles have been replaced luckily under warranty. In case anybody’s interested. When we buy our Lexuses, we purchased certified used and this adds two years to the factory warranty with unlimited mileage. Which brings your warranty to six years. Then we extend with Lexus five year extended warranty, which gives us 11 years of warranty overall and this is a full warranty with unlimited miles. My 2015 is still under warranty till 2026 and my wife’s 2016 is under warranty until 2027 most people don’t know about this, but it’s absolutely worth it if you plan on keeping your vehicle for a long time
FANTASTIC video!! This just saved me hundreds of dollars and wasted time at the dealership. I have to replace both rear handles and was super nervous about doing this job myself, worried I would break a crucial part but you explained this so well I was able to easily fix them myself. THANK YOU THANK YOU!!
Thanks so much, just did my handle that the kids broke. would have been 45min but I missed getting the plastic fork/pick on the latch stud after I put it all together, so had undo everything again. I wouldn’t have had a clue without your video.
This is the second time I've needed to use this video, and it is simply perfectly done. Everything you need to follow right along, and it was completed with ease. Thanks so much!
You are the man. Please tag this with the 2011 toyota 4runner door handle replacement too. You are the only one that takes the time to show the lock mechanism. All the other videos left this and the most important part out. Wish I found you hours ago! Thank you so much!
Thank you so much for this video!!! My 9 year old son broke the handle that you worked on in the vid. Completed this in 15min and you saved me tons of money.
Thank You! Awesome step by step video! My kids were chasing each other around the car and grabbed onto the handle breaking it. Probably won’t be the last time this happens. Keep up the great videos!
Awesome video, made doing it a snap! The window trim trick worked flawlessly. Mine was a passenger rear door handle and the directions were the same. Took less than an hour! Thank you!
Bob Thank you so much Awesome tutorial !!!! Details are DETAILED !!!! Also design of these cars is next level!!!! Was born in USSR , all my life fixing things by myself Japanese engineering all ways amazing me how much genius ideas they put in to final product
I needed this! I just noticed that the car wash broke my passenger rear door handle, but I can't prove it now since it's already been a few days. I'm guessing that this tutorial applies to all 4 doors. Now I just have to find the parts I need. Haven't decided on cheap aftermarket or factory parts, but at least now I won't have to pay a ransom fee to have someone else do it. Thanks GX*BOB!! p.s. nice briefs 😂😂😂
Thank GXBOB! YOU'RE saved the day again what does incredibly laid out instructions replacing the rear door handles. I did my replacement read door today (Lexus Tampa wanted to charge me for 1.5 hours at $200 an hour.) I got it done in 40 minutes start to finish. I'm curious, how much more complex is a driver door? Obviously, the handle is different with touch sensors on the handle. I'm sure that the front passenger door would be very similar to the rear passenger doors.
awesome Bobby! I wanted to take the panel apart for a while now, there’s been a intermittent “clicky” sound coming out of my rear driver side door when the “TRUCK” is in motion. Now i’m confident taking it apart to see what’s going on.
That Lacoste underwear kept me watching this whole video. Thank you sir for being my inspiration to get a tattoo of a Florida alligator on my inner thigh.
Bob, your videos are great. I hope Lexus sends you a monthly check because there's nobody else with such great tutorials for the Gx460. Do you have any for the door body trim/molding removal and installation? I wanted to replace the chrome with black ones to match the pearl black handles. Also, I'm not a family man so if you want to be absolutely filthy, I'm ok with it.
hahaha, the filthy part i can do. As far as the door moldings, i have not attempted that task yet. I currently have a full plate but may get around to it. Thanks for the suggestion.
Thank you for this video, I was following it to a tee but must have made a mistake when reconnecting the cables as I finished the job, closed the door, and now the door won’t open from the outside or the inside. Do you know if it’s possible to take the door panel off with the door closed? If not, what is my other option for getting the door open? Thank you for the help!
I have a set of long torx screw drivers. My BMW motorcycle has all torx fasteners. Thanks for this video my handle broke off and I would have done more damage with out this vid. chuck in bunkie
EXCELLENT VIDEO INSTRUCTION. BRAVO. MY LEXUS DOOR HANDLE BROKE FROM THE STRENGTH OF A 6 YEAR OLD KID TRYING TO GET IN THE BACK SEAT. GREAT QUALITY - YOU WOULD HAVE THOUGHT. FROM THE SHEAR NUMBER OF THE SAME REQUEST TO FIX. TOYOTA QUALITY SEEMS AT RISK.
Excellent instructions. However, I did not use specialty plastic trim tools. I used an inexpensive plastic putty knife available at hardware store. One recommendation: he suggests during reassembly to remove the black top window seal from the door panel and put the seal on the metal door frame first. Good idea, but the top window seal was a bugger for me to get off - not as easy as shown in video. I put the door panel on the ground protected by cardboard, and pried black top window seal off at its 3 attachment points using large flat blade screwdriver and rotate the seal outwards at same time. It came out of the door panel easy that way. Of course don't break any of the plastic parts. There will still be a black metal snap at the back of the top edge of door panel. When installing the panel, first install the black top window seal onto door frame, then the back edge of door panel needs to go on from the top, then the three plastic snap holes can be pushed into the black window seal.
@@GXBOB In the GX, the driver door handle is smart and works with the key fob to unlock the door automatically. In the LX, it does this with all four doors. I don't wanna have to get my keys out in the winter if the first door I open is the 2nd row passenger doors.
Great video. Messed up on a step and needing some guidance. I closed my door checking to see if it was snug to the latch. Not I don’t know how to open it, what should I do?
You killed it! My daughter just broke the drivers rear handle and my wife was floored. I ordered a new handle and was just thinking how does the door panel come off. We have a 2011. Pearl with same interior. The passenger mirror stopped working a few months back too. Won’t adjust with switch, memory control, or fold in. Can I just swap the actuator or will I need a new mirror cap/housing as well? Thanks again for the great video and you really are helping people!
Hey Sean, yes i've noticed these door handles are getting destroyed by kids all over the world. Glad it helped. With your mirror, i would check your fuses if u haven't done so already, then i would tackle the motor portion. Taking the mirrors apart then putting power and ground to your mirror motors to see if it is indeed the motor and not some other loose wire somewhere. Here is a link to get started: th-cam.com/video/klhRxLoulNA/w-d-xo.html
I remember checking all of the fuses to find nothing out of sort. Would make sense since not only did the mirror stop but the power folding portion as well. Headed out now to have another look. Thanks Bob
Subscribed. Love the channel and help. I just picked up a 2014 GX460 in Tungsten Pearl with Black Leather. Will a body shop be able to paint my door handles to match my paint?? A wrap shop will not be able to match exactly and I don't want black.
Thanks for the tutorial on removing the door panel. I need to replace the glass in the door. Do you think it would be very difficult? Door panel removal looks to be straightforward. Not sure about the glass. Thanks
Hi GX*BOB, a subscriber here. Unfortunately, I have to bug you for some information. Where can I buy the door handle replacement? I know there are some out there but your expertise and recommendation is much appreciated. You're videos are life saver and fun. Making learning and work fun. Thank you much
My first go to would be to find GX’s that are wrecked and parting out. Especially private parties. They’re negotiable and plus you can also buy additional as back ups since they’ll be a lot cheaper than buying new at the dealership. But if you have issues finding used ones in the color you want then hit up Bell Lexus in Arizona. They’re the cheapest dealership parts with free shipping and usually have sales during holidays.
Great video. I just ordered all the parts for the rear door handle keyless entry addition from the ClubLexus forums. This video helps a lot with prepping. Have you thought about this mod? Any insight on fishing wires through the weather boot from the doors into the door sill well?
Sorry for resurrecting an old video, but I am working on replacing my handles. Rear doors, no problem. Your video was amazing! I am getting stuck on the front door handles. I can get the small part removed, but the main lever wont come free due to the touch sensor. I tinkered with it for 20 minutes and could not for the life of me figure out how to unplug it or get it so the handle will come off the outside. Any advice?
Bob, great video. I will be referencing as I need to replace the driver side rear door handle that was pulled completely out by my brother in law. The question, I have is that there appears to be a broken piece on the right side of handle that still in the door. I can't tell if this is part of the handle or another internal door part that's damaged and needs replacement. In looking at your video spot 15.53 I don't see the same piece sticking out of the door. once you remove the small door handle piece, then the handle itself. Any guidance is appreciated.
Howzit GXBOB! I watched your exterior door handle video and I changed all 4 handles on my 2010 GX. On my 2nd door, which is the driver side passenger door I was rushing and I think I forgot to hook up the 2 cables. I put the latch and panel back and closed the door and now the door can’t open. I rolled down the window and with a probe light i can see the cables but don know if I can hook the cables and pull it to open the door. You know which one is for the latch? Green or white? Would love to hear what you have to say about my predicament. Love your videos and please let me know soon.
You realize you can just remove the door handle plastic cover from the interior side smog gain access to the cables. Pull either cable to open your door and redo the installation.
Happy new year man and thank you for great videos. I watched a video, but I’m a little slow. So I obviously have stock black gx with silver handles. I want to make it full black, so if I order black plastic things do I need to do all this to replace them?
![[UNCUT] The Loyal Pin ปิ่นภักดิ์ EP.4 (4/4)](http://i.ytimg.com/vi/d3l5rxl5CVo/mqdefault.jpg)
Dude, I want you to know how much you and your channel are appreciated! The quality of instruction along with the positive attitude is just awesome! Thank you!
Oh no you just didn’t say positive attitude. That’s insulting.
I can't thank you enough! Our door handle broke and I was able to fix it in less than an hour with your help!
Let me guess…your kids broke it.
@@GXBOB of course but I once accused my daughter of breaking the window regulator bu shoving a dollar bill in the window. Turns out it was just bad. Now I just keep my mouth shut and fix it.
I’m a senior experienced Mechanic and been doing it many years and I got to say very good job breaking it all down and showing and explaining each step so that even someone who has no experience working on cars could pull this one off. That’s not as easy as it sounds to be able to explain something that way 😊
Thank you. I appreciate the kind words.
Bob, just wanted to thank you for the great video. My girls have managed to break both rear exterior door handles over the last 2 years. The first was repaired under warranty but this one was all me and the dealership wanted over $600 to replace it. (Plus a $180 diagnostic fee! Just to look at the broken handle!) Following your video and ordering a new handle online I finished the job in about 30 minutes and for less than $50. I really appreciate your insight and help! Thanks again.
Awesome Michael, glad it helped.
I have a broken rear driver side I need to replace, where can I find one, thanks in advance.
By far the most concise, clear instructional video for this type of job that I've come across. I don't even own a GX (was looking for instructions to replace handles on a 4Runner) but your incredibly detailed video is a real joy to behold!
Wow! Thanks for the kind words!
Thanks a lot! My lil 3 yr old demon hung with all his weight on the handle and broke it. $100 bucks at the dealership and this sweet tutorial put my sweet GX back in business.
Did you put her up for adoption and kept the GX? Thats what i would have done.
Thanks Bob! Knocked it out super easy due to this video. That window seal piece that you took off the door to put back in first was a PITA to get off of my door card.
@@macattack5691 Requires muscles. Not sure if you noticed in the video but I’ve been working out, lifting beer cans once a day.
Hi Bob, Thank you so much for the video. It allowed me to do this today in just 30 minutes, which allowed me to spend the rest of my day with my family.
That 30 minute you took, took o me 4 days to tape and edit. 😂😂😂 Enjoy your family!
BOB! Thank you SO much for this video. I’ve been holding off and doing this for my wife’s car because some other videos made it look harder than it actually was. If I had followed your instructions for removing the seal the first time it would have been even easier. The instructions were detailed and very helpful. I was also very impressed with the quality of the car compared to our old Escalade. God bless!
I’m glad the video helped a fellow GX owner!
Lol...I knew it. Love the messed up license plates too. Last week it was....I think..4SKIN. This week...we'll just have to watch the vid. Next week???? Greatest Gx460 channel on the Tube. Thanks Bob.
Foreskin is making a comeback. So don't go cutting yours off just yet.
If this man actually produced consistent content or even skits in shorts format this channel would blow up.
@@GXBOB ⁵⁵⁵⁵⁵⁵⁵⁵⁵
GX Bob you are awesome. My kid broke this handle and I was freaking out. Thanks for sharing all GX repair videos.
You’re the third person who’s kid broke the handle. You feeding your kids spinach?
Awesome just Awesome 👌
I don't know what to say
You are #1 in the world
Just Awesome special
(Tank you very much)
Bottom of my heart for
All your (Quality videos)
You help us a lot we save
Lots of money 💰 🤑 💸
✌👌🖐🤘👋👍🙏🙏🙏
God bless you and your family 👪 🙏 ❤ 😊🍷🍷🍻🎄🎆🎵🔊🎶🎶 Merry Christmas happy holiday
and happy new year 👋 Bye Bye 👋 🗽⛪
@@shahenabelyan1008 WOW you just made my day, thanks!
My kids have broken both my rear handles. I think it's the angle, since the handle is almost out of their reach.
@@shawnfurlong2524 yeah, i can see that happening. Their weight is pulling down on a plastic handle. That’ll do it alright.
I watched this video 6 months ago and then bought a handle and sat on the project. I was thinking there is no way it's this straightforward, something always goes wrong, is left out of the video, whatever. Nope, totally went fine. Bob, awesome videos! Thank you so much. I was quoted a couple hundred dollars in labor per handle to replace. Happy to say I won't be paying that.
That’s good to hear! Thanks for watching
Best GX door handle removal in TH-cam!!
Thanks Marcos!
Great video! My 7 year old broke this handle this morning and I was dreading what this process was going to be to replace it. You give such clear and easy to follow instructions that it should be a breeze. Thank you Bob!!
I noticed everyone mention the clarity of the instructions but no one mentioned my underwear. I find this fascinating.
This was super helpful! The trim off before panel on saved frustration. It would have saved more if I had watched the video all the way through first 😂
Thanks Sparky, i try my best to pass on as many lessons learned as i can. If you have better shortcuts, feel free to add it onto the comments as others tend to read them too.
Great video! Dealer charges $210 to do this. $68 for labor and $142 for the door handle. Both my wife’s rear doors handles have been replaced luckily under warranty.
In case anybody’s interested. When we buy our Lexuses, we purchased certified used and this adds two years to the factory warranty with unlimited mileage. Which brings your warranty to six years. Then we extend with Lexus five year extended warranty, which gives us 11 years of warranty overall and this is a full warranty with unlimited miles. My 2015 is still under warranty till 2026 and my wife’s 2016 is under warranty until 2027 most people don’t know about this, but it’s absolutely worth it if you plan on keeping your vehicle for a long time
Thanks. Good to know!
FANTASTIC video!! This just saved me hundreds of dollars and wasted time at the dealership. I have to replace both rear handles and was super nervous about doing this job myself, worried I would break a crucial part but you explained this so well I was able to easily fix them myself. THANK YOU THANK YOU!!
Were you like everyone else on here and blamed your kids? 😁
Yes!!!! 1 million percent their fault 😄
Thanks so much, just did my handle that the kids broke. would have been 45min but I missed getting the plastic fork/pick on the latch stud after I put it all together, so had undo everything again. I wouldn’t have had a clue without your video.
Its ironic how all these broken handles are caused by children. lol.
A job I was dreading, did it in under 30 mins today thanks to you!
You’re welcome Michael!
Bob thank you so much for your help. Really easy to follow!!! Look forward to your other videos
You do not want to see my other videos. They are mostly bestiality clips. Unless you're into that sort of thing.
This video saved me. My six year ripped off the door handle, with this video I was able to fix it. Thanks!!
Be honest, it was your 200 pound girlfriend that broke it.
@@GXBOB😂😂😂
Thanks so much for the tutorial! Just changed my! I was able to buy the handle on Amazon. It took me 45 minutes and a Beer.
45 minutes is 6 beers for me
Dude……I just cracked up laughing when you stood up and walked from the table!!🤣🤣 Keep up the good videos👍🏽👍🏽
Dude. That was a gay test. You failed.
Great job! You made it easy and I did not break anything! 👍
This is the second time I've needed to use this video, and it is simply perfectly done. Everything you need to follow right along, and it was completed with ease. Thanks so much!
Great to hear!
You are the man. Please tag this with the 2011 toyota 4runner door handle replacement too. You are the only one that takes the time to show the lock mechanism. All the other videos left this and the most important part out. Wish I found you hours ago! Thank you so much!
Appreciate the comment. 🙏
Thank you so much for this video!!! My 9 year old son broke the handle that you worked on in the vid. Completed this in 15min and you saved me tons of money.
You owe me a beer.
Just finished in under an hour thanks to you! Best GX specialist on TH-cam!
Thanks! 😊
Thanks Bob! This helped me out big time! My 9 year old son helped me fix the handle using your awesome video.
Glad it helped! I will start doing the front door since i received so many requests. Thanks again for watching.
Thank You! Awesome step by step video! My kids were chasing each other around the car and grabbed onto the handle breaking it. Probably won’t be the last time this happens. Keep up the great videos!
So did u smack them across the room or did you give them time out.
Excellent video. Thank you
Really enjoy your videos. Don’t stop making gx content please!
I'll eventually slow down once the online threats become real and not just threats. The LGBTQ community does not like me at all.
Amazing quality, excellent content. Thank you so much for taking the time to share your knowledge with the community 🍺
You didn’t mention my Lacoste boxer briefs.
Thank you so much for this video. I will replace my broken door handle tomorrow following your step by step instructions.
Thanks for tuning in!
Fantastic vid! Instructions couldn't have been more clear. Thank you!
You’re welcome Joshua!
I did it with your video ...thank you 30 minutes only
Now my wife happy
Glad to hear that
Awesome video, made doing it a snap! The window trim trick worked flawlessly. Mine was a passenger rear door handle and the directions were the same. Took less than an hour! Thank you!
Took you an hour? It took me 59 minutes.
Hey thanks for this video. My son and I had it knocked out it less than a hour thanks to you. 👍
just out of curiousity, did you and your son stare at my Lacoste briefs for more than a minute?
Great video ma man. You saved me 400$ in labor at the dealership. Thank you!!
I see you didn't mention how amazing my ass looked in those undies.
Thank You! Extremely helpful video! Made the job so much easier.
Stop lying. You watched it for the underwear scene just like every one else.
@@GXBOB Lol.. That was funny, I'm expecting spedo's next time 🤣
Bob
Thank you so much
Awesome tutorial !!!!
Details are DETAILED !!!!
Also design of these cars is next level!!!!
Was born in USSR , all my life fixing things by myself
Japanese engineering all ways amazing me how much genius ideas they put in to final product
hook me up with some russian chicks while you're at it.
Wonderful video. Thank you. Task completed in about a half hour, you're the man.
Thanks !
Great job and very detailed instructions how to remove and install the door handle back. Keep up the good work my friend!
Thanks Thomas, appreciate the kind words!
AMAZING EXPLANATION!! YOURE A PRO.
Glad you think so! I try my best to dummy it down.
I needed this!
I just noticed that the car wash broke my passenger rear door handle, but I can't prove it now since it's already been a few days.
I'm guessing that this tutorial applies to all 4 doors.
Now I just have to find the parts I need. Haven't decided on cheap aftermarket or factory parts, but at least now I won't have to pay a ransom fee to have someone else do it.
Thanks GX*BOB!!
p.s.
nice briefs 😂😂😂
The briefs are Louis Vuitton
thank you for the video...I will have to do this to mine, this definitely will make it easier
Thank GXBOB! YOU'RE saved the day again what does incredibly laid out instructions replacing the rear door handles.
I did my replacement read door today (Lexus Tampa wanted to charge me for 1.5 hours at $200 an hour.) I got it done in 40 minutes start to finish.
I'm curious, how much more complex is a driver door?
Obviously, the handle is different with touch sensors on the handle.
I'm sure that the front passenger door would be very similar to the rear passenger doors.
This is AWESOME !!!
Can not wait to fix both of mine handles which my kids happily ripped off year ago
Thank you so much!!!
How in the world did you get in and out of your handles were ripped out years ago? Clothes hanger?
I freaking love you, dude… May God always bless you.
Wow. Best compliment ever. Thanks
The best "how to" video I've seen!
Nah, i've seen some decent ones.
Thanks again for your job, I have saved 1,105.33 in labor for a two-door handler
You can send $1105 to me if you want. 🙏
Awesome video, I’ll be using it to replace my door handle that I broke recently. First I’ll have to find one in my color.
glad i can help !
awesome Bobby! I wanted to take the panel apart for a while now, there’s been a intermittent “clicky” sound coming out of my rear driver side door when the “TRUCK” is in motion. Now i’m confident taking it apart to see what’s going on.
That's going to be tough to trace down a clicking sound if the car is not in motion.
Great video, I was able to complete the installation with very little problems!
A good instruction video is rarely followed by more questions. Thank you!
Stopped watching halfway and did the repair. Couldn't get the panel on and had to watch some more. Thanks Bob!
Any time David, glad it helped.
AWESOME! MY MAN! Love the blue skivvies…
My neighbors love it too.
@@GXBOB PG 😉👍
Thanks a lot for the video. It's still helpful.
Glad it helped
Worked. Great instructions and details. Thanks!
Glad it helped Luke!
Hi man, I just wanna say thank you! as of today your video has helped me a ton! Cheers
I do it for comments like this Gaston. Thanks for tuning in when you have so many choices to view on the internet!
Great video. You hit every point. I knocked this out on my vehicle in like 10 minutes.
I believe you hold the current record. Last person did it in 11 min.
Great video. I was able to replace the door handle. Thank you.
Any time dude!
That Lacoste underwear kept me watching this whole video. Thank you sir for being my inspiration to get a tattoo of a Florida alligator on my inner thigh.
This has got to be the gayest comment yet.
Excellent video.
Nah, I’ve seen better.
Just wanted to say thank you! Nice video.
Appreciate the comment, thanks!
Thanks you!
Excellent video step by step 30m job tk Bob.
Hey Bob, thanks again for a great video!! I did today in 30 min 😃😃
i bet you will do it in 20 minutes on the next one.
Bob, your videos are great. I hope Lexus sends you a monthly check because there's nobody else with such great tutorials for the Gx460. Do you have any for the door body trim/molding removal and installation? I wanted to replace the chrome with black ones to match the pearl black handles. Also, I'm not a family man so if you want to be absolutely filthy, I'm ok with it.
hahaha, the filthy part i can do. As far as the door moldings, i have not attempted that task yet. I currently have a full plate but may get around to it. Thanks for the suggestion.
great video again Bob, are those the latest shorts from Lululemon?. need to get some ..thanks for all these as usual
Good guess but They're Louis Vuitton.
Thank you for this video, I was following it to a tee but must have made a mistake when reconnecting the cables as I finished the job, closed the door, and now the door won’t open from the outside or the inside. Do you know if it’s possible to take the door panel off with the door closed? If not, what is my other option for getting the door open? Thank you for the help!
I have a set of long torx screw drivers. My BMW motorcycle has all torx fasteners. Thanks for this video my handle broke off and I would have done more damage with out this vid. chuck in bunkie
I assume Chuck means Charles, but i can't wrap my hands around what Bunkie stands for....
Thank you brother!
Any time!!! Thanks for watching.
Very well done. Thanks for showing the clips. And I'm a professional mechanic.
Thanks for the comment David!
EXCELLENT VIDEO INSTRUCTION. BRAVO.
MY LEXUS DOOR HANDLE BROKE FROM THE STRENGTH OF A 6 YEAR OLD KID TRYING TO GET IN THE BACK SEAT. GREAT QUALITY - YOU WOULD HAVE THOUGHT. FROM THE SHEAR NUMBER OF THE SAME REQUEST TO FIX. TOYOTA QUALITY SEEMS AT RISK.
I will still take a Toyota over a Dodge Plymouth any day, despite the lack of quality in their door handles. 🙃
Please do a video on installing switch refreshing ( for heated seats ). Thank you.
What in the hell is a switch refreshing?
Thank you so much for this video Bob! Just tackled this project today on my 2012 GX. Couldn’t have done it without you.
Thanks Andrew, let me remind you that this channel would not exist without you. 👍
Excellent instructions. However, I did not use specialty plastic trim tools. I used an inexpensive plastic putty knife available at hardware store. One recommendation: he suggests during reassembly to remove the black top window seal from the door panel and put the seal on the metal door frame first. Good idea, but the top window seal was a bugger for me to get off - not as easy as shown in video. I put the door panel on the ground protected by cardboard, and pried black top window seal off at its 3 attachment points using large flat blade screwdriver and rotate the seal outwards at same time. It came out of the door panel easy that way. Of course don't break any of the plastic parts. There will still be a black metal snap at the back of the top edge of door panel. When installing the panel, first install the black top window seal onto door frame, then the back edge of door panel needs to go on from the top, then the three plastic snap holes can be pushed into the black window seal.
thanks for the input John.
Do a video on modding the GX 2nd row door handles to function like they do in the LX.
I keep coming back to this comment. Can you elaborate?
@@GXBOB In the GX, the driver door handle is smart and works with the key fob to unlock the door automatically. In the LX, it does this with all four doors. I don't wanna have to get my keys out in the winter if the first door I open is the 2nd row passenger doors.
@@NytronX Gotcha, now i understand. Jeez. That might be more than just a simple programming. We might have to drop the engine for this one.
Thank you so much!
You got it Daryl!
Any differences on the front handle? Awesome video.
Very useful 🎉❤
Ok, the underwear shot earned you a subscriber. Good work Bob.
Damn it. Only thing i learned from doing this was discovering there are more weird people than me.
Great video. Messed up on a step and needing some guidance. I closed my door checking to see if it was snug to the latch. Not I don’t know how to open it, what should I do?
Manually open the door by removing the plastic door handle from the inside. Remove the steel cable from the door able and pull until the door opens.
You killed it! My daughter just broke the drivers rear handle and my wife was floored. I ordered a new handle and was just thinking how does the door panel come off.
We have a 2011. Pearl with same interior. The passenger mirror stopped working a few months back too. Won’t adjust with switch, memory control, or fold in. Can I just swap the actuator or will I need a new mirror cap/housing as well?
Thanks again for the great video and you really are helping people!
Hey Sean, yes i've noticed these door handles are getting destroyed by kids all over the world. Glad it helped. With your mirror, i would check your fuses if u haven't done so already, then i would tackle the motor portion. Taking the mirrors apart then putting power and ground to your mirror motors to see if it is indeed the motor and not some other loose wire somewhere. Here is a link to get started:
th-cam.com/video/klhRxLoulNA/w-d-xo.html
I remember checking all of the fuses to find nothing out of sort. Would make sense since not only did the mirror stop but the power folding portion as well. Headed out now to have another look. Thanks Bob
Thanks a lot!
You got it Paul!
Subscribed. Love the channel and help. I just picked up a 2014 GX460 in Tungsten Pearl with Black Leather. Will a body shop be able to paint my door handles to match my paint?? A wrap shop will not be able to match exactly and I don't want black.
Thanks for the tutorial on removing the door panel. I need to replace the glass in the door. Do you think it would be very difficult? Door panel removal looks to be straightforward. Not sure about the glass. Thanks
i honestly can't tell you as i have never replaced a door glass in my life.
Thank you so much Bob! 🙏
My pleasure!
bob do not worry this Steve has no sense of humor, again, your videos are supper
Lol thanks George
Hi GX*BOB, a subscriber here. Unfortunately, I have to bug you for some information. Where can I buy the door handle replacement? I know there are some out there but your expertise and recommendation is much appreciated. You're videos are life saver and fun. Making learning and work fun. Thank you much
My first go to would be to find GX’s that are wrecked and parting out. Especially private parties. They’re negotiable and plus you can also buy additional as back ups since they’ll be a lot cheaper than buying new at the dealership. But if you have issues finding used ones in the color you want then hit up Bell Lexus in Arizona. They’re the cheapest dealership parts with free shipping and usually have sales during holidays.
@@GXBOB great info GXBOB. Appreciate your take and advice. Sorry for the late response.
Great video. I just ordered all the parts for the rear door handle keyless entry addition from the ClubLexus forums. This video helps a lot with prepping. Have you thought about this mod? Any insight on fishing wires through the weather boot from the doors into the door sill well?
there were no jokes in this video. It was all serious.
Hi Bob, thank you for this great tutorial. Is the process the same with the front doors? Thank you
Thank you. Have had a broken door handle for many months. Now I’m ready to DIY!
While you're at it, replace those ugly chrome trims with black pearl ones!
Sorry for resurrecting an old video, but I am working on replacing my handles. Rear doors, no problem. Your video was amazing! I am getting stuck on the front door handles. I can get the small part removed, but the main lever wont come free due to the touch sensor. I tinkered with it for 20 minutes and could not for the life of me figure out how to unplug it or get it so the handle will come off the outside. Any advice?
i am trying to find the time to do the front doors.
thanks so Mr Bob save me money
you're welcome dude!
Great video thank you, could you tell me where you bought your tools to remove the panels?
Harbor freight
Bob, great video. I will be referencing as I need to replace the driver side rear door handle that was pulled completely out by my brother in law. The question, I have is that there appears to be a broken piece on the right side of handle that still in the door. I can't tell if this is part of the handle or another internal door part that's damaged and needs replacement. In looking at your video spot 15.53 I don't see the same piece sticking out of the door. once you remove the small door handle piece, then the handle itself. Any guidance is appreciated.
I seriously have absolutely no clue what piece you’re talking about
@@GXBOB drive.google.com/file/d/1mFMwb3K35uwMd_8qybUtg2uXpH4Zn-Nc/view?usp=drive_link
Howzit GXBOB!
I watched your exterior door handle video and I changed all 4 handles on my 2010 GX. On my 2nd door, which is the driver side passenger door I was rushing and I think I forgot to hook up the 2 cables. I put the latch and panel back and closed the door and now the door can’t open. I rolled down the window and with a probe light i can see the cables but don know if I can hook the cables and pull it to open the door. You know which one is for the latch? Green or white? Would love to hear what you have to say about my predicament. Love your videos and please let me know soon.
You realize you can just remove the door handle plastic cover from the interior side smog gain access to the cables. Pull either cable to open your door and redo the installation.
Happy new year man and thank you for great videos. I watched a video, but I’m a little slow. So I obviously have stock black gx with silver handles. I want to make it full black, so if I order black plastic things do I need to do all this to replace them?
I believe they are double sided tape
I was in the process of reinstalling the door panel when a 2" black spring dropped out from the panel. Any idea where this may go?
That would be like the blind leading the blind.