Good job. I am so pleased with all the ladies that are coming online lately showcasing their skills and projects. I really hope that it inspire more ladies to either break the ice and started showcasing their projects - even if it is beginners level or that more and more ladies take up woodworking. It is such a fulfilling hobby / career.
where have you set your WCS zero for this particular project? Stock corner, or a specific feature in your leaf design. making the 3 holes for pins in the stock, then flipping the part over on mirrored holes allows you to set the design parallel to the x and y-axes after the flip - so how have you measured the {0,0,0} after flipping the part? :) Thanks
@@ViorelStolea Hi Viorel, The X0 Y0 for both sides is set to the lower left hand corner (on the top side it would have been roughly at the lower left hand corner of the material, and for the bottom side any where on the spoil board (ensuring there is space for the part to flip over)) The Z0 for the top side is set to the top of the material block and the Z0 for the bottom is set to the Material Surface (referencing from the same face) I hope this answers your question :)
I am confused because the leave you carved was not the same one you created in the companion video. But more interesting is that the toolpath strategy was different with much more material removal beyond the outside dimensions of leaf model itself. Am I missing something?
How can I copy the top face to the back of the piece, in order to make complex shape with exactly the same material thickness throughout the final product?
Hi Dan, thank you for your kind comments and that's great news I bet you are ever so excited!! We don't actually have the file for this model available however I did a series of tutorials making bowls and the leaf bowl is fairly similar to this one here. We don't provide the gcode, just the file for you to save out in the Post Processor you require. The file can be downloaded from your V&Co account, I hope this helps :)
Also, far too bloody expensive! Only commercial operators can afford this 'ware. Hobbyists... no chance. Bearing in mind this is supposed to sell the software, it's noticable by it's invisibility. No mention of how to program the 'flip', or how to locate position of the dowels in the spoilboard. Part of her early explanation is so muffled, it's incomprehensible. Pretty bad show for such a good app.
Here is a link on our website to the tutorial for the leaf bowl and the files: www.vectric.com/vectric-community/free-projects/tips-and-tricks/Makingaleafbowl Hope this helps! Thanks
Hi. What do the springs on the Z axis assembly do? also what has become of the prequel to this video? also the moving table gives me a migraine but i still have to watch! Thanks, Rob.
RobSmathome they counterbalance the weight of the moving parts of the z axis so the z motor is less likely to miss steps and won't run as hot as it would otherwise.
Hello ! In how many time is ready one leafe bowl from start to finish with this router...? Please answere !!! And the name(model) of this cnc and the price of it....thank's !
Hello Dan... thanks for the questions. The time it takes all depends on your CNC and the tools you plan to use... also the material. Making this in "pine" would take less time then in "maple". The CNC we used in this video is a ShopBot, and you can inquire with them on pricing. Hope that helps.
If you go to vectric.com and search through the menus there are plenty of tutorials to take you from absolute beginner to well trained. They are also all on TH-cam as far as I know too. I’ve been learning from these and they are exceptionally well done and easy to follow along with and it doesn’t take long to get the hang of even the more exacting parts of the program. A fair learning curve but worth the climb.
She's not the only one. I've checked out two other CNC channels and they all neglect to talk about the non-trivial exercise of how to organize the toolpaths for the pins.
I brought aspire I also have fusion I would buy aspire again so easy to use from never using a cnc or cad I was producing products on my first day with aspire
И какой смысл этого видео ? Что у вас есть ЧПУ и вы им умеете работать ? Вы бы хотя бы после смены фрезы говорили или писали их параметры , софт , а так все знают что на ЧПУ можно фрезеровать.
Good job. I am so pleased with all the ladies that are coming online lately showcasing their skills and projects. I really hope that it inspire more ladies to either break the ice and started showcasing their projects - even if it is beginners level or that more and more ladies take up woodworking. It is such a fulfilling hobby / career.
Thank you we do to!
I personally use 4 dowels and drill the holes thru the spoil board together with stock. Usually very precise and I get to keep the same x0y0
Amazing techniques with wonderfull accent. Thank you again backy
Thanks!
where have you set your WCS zero for this particular project? Stock corner, or a specific feature in your leaf design. making the 3 holes for pins in the stock, then flipping the part over on mirrored holes allows you to set the design parallel to the x and y-axes after the flip - so how have you measured the {0,0,0} after flipping the part? :) Thanks
Hey Viorel, If you take a look at these videos hopefully that should help answer you questions: th-cam.com/video/J7LyyO6svKo/w-d-xo.html Thanks :)
@@vectric I watched yout video but it didn't answer my simple question....
@@ViorelStolea Hi Viorel, The X0 Y0 for both sides is set to the lower left hand corner (on the top side it would have been roughly at the lower left hand corner of the material, and for the bottom side any where on the spoil board (ensuring there is space for the part to flip over)) The Z0 for the top side is set to the top of the material block and the Z0 for the bottom is set to the Material Surface (referencing from the same face) I hope this answers your question :)
@@vectric Thank you. So you used a point on the stock, not a point of a feature you already machined. Got it!
I am confused because the leave you carved was not the same one you created in the companion video. But more interesting is that the toolpath strategy was different with much more material removal beyond the outside dimensions of leaf model itself. Am I missing something?
How can I copy the top face to the back of the piece, in order to make complex shape with exactly the same material thickness throughout the final product?
You did a great job. I am new to the CNC world and have my CNC machine on order, is there anyway I could get the G code for this project from you?
Hi Dan, thank you for your kind comments and that's great news I bet you are ever so excited!! We don't actually have the file for this model available however I did a series of tutorials making bowls and the leaf bowl is fairly similar to this one here. We don't provide the gcode, just the file for you to save out in the Post Processor you require. The file can be downloaded from your V&Co account, I hope this helps :)
Vectric Ltd thank you. Keep up the great work it really helps me understand more about CNC wood working.
@@danpayne9735 No Problem, we're glad it's working for you :)
Awesome job Becky as usual thank you
Not only educational - but I could watch this over and over just to listen to that wonderful accent!.. I think I'm in love!
with CNC?
How much time did it take to machined this piece?
ı saw your software very usefull. i recommend every woodworker cnc operator should use vectric aspire. omg its very good cnc machining software.
Thank you for your kind comments Jeny, glad you are enjoying the software!
Also, far too bloody expensive! Only commercial operators can afford this 'ware. Hobbyists... no chance.
Bearing in mind this is supposed to sell the software, it's noticable by it's invisibility.
No mention of how to program the 'flip', or how to locate position of the dowels in the spoilboard.
Part of her early explanation is so muffled, it's incomprehensible.
Pretty bad show for such a good app.
Great Work. Do you share or sell the drawing for this project?
Here is a link on our website to the tutorial for the leaf bowl and the files: www.vectric.com/vectric-community/free-projects/tips-and-tricks/Makingaleafbowl Hope this helps! Thanks
do you have the video of you setting up this in the vectric software?
Hi there we do have this tutorial of creating it in the software: th-cam.com/video/dUQKJ1xPdEs/w-d-xo.html hope this helps!
Hi.
What do the springs on the Z axis assembly do?
also
what has become of the prequel to this video?
also
the moving table gives me a migraine but i still have to watch!
Thanks,
Rob.
RobSmathome they counterbalance the weight of the moving parts of the z axis so the z motor is less likely to miss steps and won't run as hot as it would otherwise.
Hello ! In how many time is ready one leafe bowl from start to finish with this router...? Please answere !!! And the name(model) of this cnc and the price of it....thank's !
Hello Dan... thanks for the questions. The time it takes all depends on your CNC and the tools you plan to use... also the material. Making this in "pine" would take less time then in "maple". The CNC we used in this video is a ShopBot, and you can inquire with them on pricing. Hope that helps.
hi, where is the companion video? i youtube searched for Two Sided Leaf Bowl tutorial and got nothing but this video. And the download link is broken.
I am just thinking that surely you should plane the stock square or at least parallel on the sides you are milling. Great result though.
nice tutorial.
can you do more Practical videos? thanks !
If you go to vectric.com and search through the menus there are plenty of tutorials to take you from absolute beginner to well trained. They are also all on TH-cam as far as I know too. I’ve been learning from these and they are exceptionally well done and easy to follow along with and it doesn’t take long to get the hang of even the more exacting parts of the program. A fair learning curve but worth the climb.
Great Job !
Thank you!
I can't find the first video!!
Hi there this is a tutorial on how to create the leaf bowl in the software: th-cam.com/video/dUQKJ1xPdEs/w-d-xo.html hope this helps! Thanks
how long did it take to do the roughing and the final 3d?
👍👍👍
Thanks!
I have noticed that you always forget to say that the dowel holes in the spoilboard have to be mirrored to fit.
She's not the only one. I've checked out two other CNC channels and they all neglect to talk about the non-trivial exercise of how to organize the toolpaths for the pins.
what if i zero from the corner but my piece of wood isnt square?
Where does one purchase this file?
nice job!
CNC machine looks nice and wonder the company that made it?????????
Sensacional
Thank you!
I brought aspire I also have fusion
I would buy aspire again so easy to use from never using a cnc or cad I was producing products on my first day with aspire
素敵です。テーブルベースが可哀想なことになってますね。両面NC加工するのであれば、マテリアルの木材の外周をしっかり加工し、外周を囲って位置決めすれば、何個でも量産できるね。今ひとつ工夫が必要だね。
И какой смысл этого видео ? Что у вас есть ЧПУ и вы им умеете работать ? Вы бы хотя бы после смены фрезы говорили или писали их параметры , софт , а так все знают что на ЧПУ можно фрезеровать.