Master Mechanic finds Bad Steering Angle Sensor. ESP BAS, Traction Control, ABS lights are on.
ฝัง
- เผยแพร่เมื่อ 5 ธ.ค. 2019
- Heff from Heff's Automotive diagnoses what is causing the ESP BAS, Traction Control and ABS lights to be on. He determines it is the Steering Angle Sensor so the column needs to come off. Also a little about my new relationship with eManualOnline.com! I would really appreciate your smashing that "Applaud" button and leaving a little something if this video helped you. Thanks!
Check out my affiliate link for our new friend eManualOnline.com and get 20% off!
shareasale.com/r.cfm?b=548898...
Also for gifts and Jeep parts my Amazon Assoc. link.
www.amazon.com/gp/search/ref=... wk&index=aps&camp=1789&creative=9325&linkCode=xm2&linkId=9eafea109e552ffe37ca34e3ecbc65a1 - แนวปฏิบัติและการใช้ชีวิต
Thanks, my vehicle has a similar problem with all the different warnings lights on. I’m glad it might be a sensor.
You're welcome and thanks for the nice comments. Please Subscribe & hit that notification bell! Good luck!
Great video thanks
You're welcome!
my 2005 Audi A8L has steering angle sensor voltage supply terminal 30 and front passenger wheel speed sensor faults. The steering angle reset requires VCDS which I don't have
Interesting. Thanks so much for the comment and info! Please Subscribe and hit that notification bell as there will be more!
My 2013 Suburban LTZ has the traction control light and the service stabilitrak light on. Many people advise me to check the steering position sensor connector. Theres mention of putting a foam spacer to keep the connector from leaning over and to prevent corrosion?
Thanks! Master Mechanic?
I had my left axle replaced and I noticed the steering wheel was not aligned and as I drove home the Jeep made this rumbling noise and immediately the ESP BAS and traction sensor illuminated on the dashboard. My question is could the replacement of the axle damage the Steering Angle Sensor? Any feedback would be appreciated.
Did you take it back to the person who replaced the axle? It could have caused it.
I replaced the tie rad yesterday and the light turned on so it’s not always the angle sensor
You need to replace your clock spring, it's cheaper when u buy it and get a mechanic to put it in, rather then tge garage.
I have a 2010 dodge Journey ESP/BAS and traction lights come on at random which is causing my car not to shift out of park when lights are on. I have to shut my car off and turn back on to get lights to shut off and able to shift out of park any advice?
Thanks for the question. Heff any ideas?
my traction control light went on after changing my steering wheel.. and scanner says it’s angle sensor. My question is angle sensor mounted on clock spring?
Yes I believe it is but I haven't replaced it yet. When I do I'll post a video. Thanks for the comments. Give us a follow and Subscribe as there will be more!
I have abs, esp bas and tc lights on thinking thats my problem too..i read on a jeep forum that it may be able to re calibrated?? Doesnt hurt to try. Then go from there
Hmm let us know how that goes Andrew. Thanks for the comments! Give us a follow and Subscribe as there will be more!
@@OurSimpleAdventures Good day sir,just wondering if that could be the problem with my 2009 Jeep Comander,all 3 lights are on,(ABS,Trac. cont. and ESP)But sometimes they go away,but comes back on..Strange.Thank you so much..✌
@@CliffMcLarnon Hi Cliff, It definitely could be but I'll let our Master Mechanic answer that if he is still watching. Eric?
Thanks
You are welcome! Give us a follow and Subscribe as there will be more!
Can code C121C (Torque Request Signal Denied) be caused because of code U0126 (Lost Communication with Steering Angle Sensor)? I do have code C2100 (Low Battery Voltage) And i have been told that my car seems to have a shortage somewhere because the lights dim when we ran an alternator test (good) and battery test (bad which was replaced) when i turn my steering wheel all the way to either side, it makes a nasty noice that seems to come from the power steering pump. I also have problems with my blinkers and my headlights be glitching at times. Sometimes i have my car on idle and they flick even my dashboard so i know it’s something electrical. The history with this car (2005 Chrysler 300 5.7L V8) is that it had a bad heater core so they ended up replacing it.
I also have my airbag light on...
Hi Luis, I'm going to leave this for my Master Mechanic or whomever else might be able to help you. Thanks for the question! Please Subscribe & Hit that Notification Bell as there will be more!
@@LuisMunoz-jc1pi Wow a Christmas Tree!
I only have CEL and the airbag light on. Not even the ABS light on. I had to scan it to see the codes on my own
@@LuisMunoz-jc1pi Good luck Man! Please let us know what you find as it helps everybody.
This guy is making big money off you just being a mechanic & listening to his lingo is hilarious
Right. Lol Thanks so much for your intelligent comment!
You are wrong here the whole steering column does not need to be removed you just need to remove the steering wheel then the clock spring and it’s attached to the back of the clock spring
Thanks Barry!
so the angle sensor is mounted on clock spring?
Yes I believe it is.
Thanks for that I just change rack and pinion so after that the code c0d35 steer wheel sensor signale implausible
Thanks sangwa!
HI GUY HOPE U CAN POST THIS CAUSE I AM COMPUTER CHALLENGED. 2009 CHALLENGER MANUAL TRANS. ESP BAS LIGHT CAME ON WHEN TIRE CAME OFF CURB OUT OF GAS STATION RAMP N TIRE SPUN.ESP (ELECTRONIC STABILITY CONTROL)BAS(BRAKE ASSIST PROGRAM) I DID ALL THE TRICKS ON U TUBE. SPIN WHEEL ALL THE WAY TO RIGHT THEN TO LEFT. TURNED LIGHT OFF TEMPORALLY. TURNED CAR OFF WHILE IN NUTRAL WHILE GOING 20 MPH N RESTARTING IT. TURNED LIGHT OFF TEMPORALLY. LOOKED INTO STEERING ANGLE SENSOR N FOUND THAT IF THIS HAPPENS TO U , IT SHOULD RESET ITSELF AFTER ABOUT 100 MILES OF DRIVING OR SO.IF NOT,THERE ARE CODE READER DEVICES THAT HAVE SAS ON THEM. THIS RESETS YOUR STEERING ANGLE SENSOR. DO THIS BEFORE CHANGING IT.ALSO WHEN U DO CHANGE IT IT SHOULD BE RESET TO CENTER.
Thanks Evelyn!
Did the angle sensor fix it?
I haven't done it yet. I will post a video when I do. Give us a follow and Subscribe as there will be more!
I'm having similar issues with my 09 caravan and the dodge dealership wants big money to fix it, so i solved the problem by trading it in for a toyota lol
Haha! Thanks for the comment!
Are you in Canada or USA?
USA Arizona
Did you say he does mobile diagnostics?
Go ahead and call him. He'll help you if he can!
He never mentioned the simple reset that the maker suggested to try first
Thanks Eric!
He can't overcharge you that way.
I have a c2200 & c2205 code
Sounds like same thing then. Give us a follow and Subscribe as there will be more!
PLEASE READ: they guys in this video took the expensive way out although the video was informative. Look for my name and video on a cheaper way to fix the problem.
Ball joint? I didn't know the ball joint had a sensor attached to it. Thanks for the comment though!
Bloke is a bullshitter, you are being had over, remove steering column, lmfao
Haha! You think? I'm going to disagree. Thanks for the comment! Give us a follow and Subscribe as there will be more!
Master mechanic lol
He is good!
A master mechanic but doesn't know the order of the letters for the service light 🤦
Thanks for the comment!
This why i hate mechanics. Always exaggerating the fix. Im gonna have to open a shop and though i may not be profitable to be rich, i can gain business by being honest!! The whole thing dont come out. Just steering wheel and clock spring. Its on back if clock spring. Whole column my butt!! 😆
Thanks for the comment D Roc!
Completely wrong....
You think?
@@OurSimpleAdventures
He's Abso-EFFIN-Lutely correct about it being 100% WRONG & DECEPTIVE 💯
☝😎☝
Thanks! @@C-TOWN-ALL-STAR