@@proxyhx2075 My esp8266 flashes when I press the flash button but then gets stuck on loading and always fails to flash properly. Do you know how I could fix this? I've installed the drivers many times already and done everything as shown but it doesn't want to flash.
Yea it's 4 am, and I remembered I did this around 7 or 8 years ago when it first was "getting hype" couldn't find the original video I watched found this, didn't know the password I used anymore only knew it was the base password and a number I added haha xD found the base PW in this vid and added my number I still had in mind , it still works xD even tho it's an early version
And I got 20 out of 20 in computer lessons when I told them it was me. Note: A Year ago, I almost needed to re-do the class because I am a scrub with computers
Thanks, still works perfectly, didn't try deauth function, but if fake wifi points work, i suppose deauth will too. If anyone got troubles with password, it's ''deauther'' not in caps.
Many people has published the same code, either with the uploader or with code to upload it throughout Arduino IDE but none of them explained hoy to use it or provide a confusing explanation, you explained it clearly and perfect, , thanks a lot for that!!!
My Node doesn't seem to generate wifi. I can connect but cant go to the IP address in the web address bar because the pwned network isnt generating wifi? Help?
Great video, Thank You 🤩 👍🏻 Do you know if you can extend the Range of this board ? Like to work say a distance of 5-10 meters? If I soldered a thin piece of wire, maybe about a meter long onto the Aerial on the board ? Any Help or advice appreciated 😁🤞🏻 Thanks Again 👍🏻
Hello tech James, I have performed the download flash and I do see the lower green symbol on the left side, but I do not see the "pwned" on the wifi section. Am I doing something wrong?
Hibtech james you are a great teacher i followed all your steps but when i get the comport box up its on comport1 were yours is on 3 and when i press the flash button its not working its saying no wifi even though there is please please can you help me many thanks
Can i have a question. I normaly connect to IP And than go to settings And set "hidden" than i reboot And i dont know how to connect to my pwned if IT not show. Please help
Hello, congratulations on your construction. I'm doing one of these with a nodemcu, I2C 1306 display and neopixel led and buttons, but the led does not light up and the buttons on the same pins as yours do not respond, I use the spacehuhn deauther code, I cannot make it work, I am not good in code with arduino, could you help me? I already searched Aconfig.h, but I don't know what else to enable there to work. Thanks
Hi so I have accidentaly changed the bin file on how to open it. It opens with some notepad and just shows random numbers. Can you help me restore the way it opens?
you gotta flash it with the deauthorize firmware, but you gotta use the flash button which is tricky :plug it your computer, press the flash button and hold it down while unplugging the USB, release the button, then press down again while plugging it back.
I just got one yesterday an it work for just a bit an when i got home from work, it doesn't work any more. Any tips on how to reconnect to it its not show up at all
I'm stuck at 4:58 I can't seem to find my board it's a Wonolo ESP32, Internet keeps saying how easy it is to setup so far i've spent 4 days on this and still haven't got anywhere. I tried to reboot/reset, no joy
Hello! You have to change the cable you used, it wasn’t working for me however I used an old beats cable and it worked you should hear the connect sound when you plug ur esp in for it to work
after i start attack. it does not work and the network pwned disappears but my internet that i attack is still working. and the only way im able to get the network to comeback up is to reset the device
I just came back to this video at 6:20 AM in the morning, didn't sleep yet lol. I don't know how but I had the same problem on my brothers laptop, I somehow fixed it with drivers. I just downloaded some random drivers, intensely googled for a while and jammed some drivers in the a** of the laptop. Gave it a restart and bam a COM port appeared....
Hey man great tutorial, once I hit flash the stop button popped up, however nothing was being downloaded to my ESP. The screen kept flashing require (gpio) and require (wifi). Any thoughts?
Under the operation tab: COM Port does it have a choice (ie COM3) if not then...On your computer, go to your device manager and see if you have a PORTS option,click on that to see which com channel you are supposed to use (default I believe is COM 3) if there isn't a PORTS option then you have the wrong USB drivers installed. See, most of these MCUs come UNFLASHED and you won't be able to flash the deauth BIN file without the proper USB drivers and NO Windows will not automatically find it. I had to install Python27 on my system just to get the proper drivers on mine. If you still need help I can find the video I found to set this up. This other info about unplugging and plugging it back in won't matter if you don't have the proper drivers.
@@mthewolf1095 Im having the same problem I have a choice of ports 3,4,5 on the flasher & only 3,4 on the pc. wqould you be able to find that vid please....
I bought this recently and I followed all the steps correctly once I plug the device in it comes up as "COM1" and I have no other coms to select and also when I click flash it doesn't even load or give me my mac please help
Hello, right so when I plug my Jammer into my laptop and run the Nodemcu programmer nothing happens, I have tried different USB cables any help would be fantastic,
On your computer, go to your device manager and see if you have a PORTS option,click on that to see which com channel you are supposed to use (default I believe is COM 3) if there isn't a PORTS option then you have the wrong USB drivers installed. See, most of these MCUs come UNFLASHED and you won't be able to flash the deauth BIN file without the proper USB drivers and NO Windows will not automatically find it. I had to install Python27 on my system just to get the proper drivers on mine. If you still need help I can find the video I found to set this up. This other info about unplugging and plugging it back in won't matter if you don't have the proper drivers.
@@normallyashton I'm not sure if you are educated about electronics but the pins are used on a breadboard or just for soldering. It's mainly used in Arduino projects. It is necessarily used with an Arduino (Nano?) which is the main component of the project, the brains of it. Using it as a deauther is also possible and it doesn't require the data pins. You can't just snip them off either, I always buy mine off Aliexpress from a seller I know and trust very well and he always ships them with the pins stuck in plastic foam so they won't break/get damaged or stab you. Just be careful using it in the open and try not to touch the ESP8266 (any sensitive/fragile electronics) with bare hands, an electrostatic discharge can kill it easily. That's why electronic parts you order online always come in antistatic packaging, in blue tinted translucent plastic.
I have a question. I did all the step and it works but only on camera that have wifi. LIke phones and computer does not pop up at all. Can anyone help?
Hello, lets say i want to jam two or more wifi, Can i use two ESP8266 at the same time? How do i rename the default name from "pwned" to something else?
The beacon attack works here, but the deauther stucks in 20 pkts and doesnt work, i tried with FIVE differents esp 8266, and differents acess points...
I need to jam my workers' cell when they should be working, and they will not stop. Will this really stop them from using their cell? I hope so. Will the another person know who or what is jammin, and can I still be able to use me own wifi and internet?
I have a very curious problem, I managed to make it work as you showed in the video, also when I do the attack, all my mobile devices within my network are disconnected (it works). But even though the attack is on and all my mobile devices are disconnected, my laptop can still use the internet. Is this because it has more power to connect or something like that?
Blocked as in what exactly? If you have network connectivity to that network (if a SOHO router or ISP gateway) you could just block the device in the parental control functions, if you mean disconnecting it from WiFi you would need a evil twin and deauther , or a wireless jammer
I just came back to this video at 6:20 AM in the morning, didn't sleep yet lol. I don't know how but I had the same problem on my brothers laptop, I somehow fixed it with drivers. I just downloaded some random drivers, intensely googled for a while and jammed some drivers in the a** of the laptop. Gave it a restart and bam a COM port appeared....
the purpose of this project is to make people realize that u need to upgrade your router and yet some jackass like this guy promote it as WIFI JAMMER even though the creator in the term of service specifically say dont refer to this project as wifi jammer (its pretty good for pranking your friend or getting someone fired tho)
UPDATE: I've got a COM number. Lol. But now when i hit Flash it starts to load then i get an error. (Rather than the bottom left circle staying Green, it turns to a red - a moment or so after i hit flash. Any suggestions.????
how to block those things that is using deauther app coz it seems someone trying to cut off my wifi. i need it for my online class. i hope there is a solution also .
Surely a way to overcome this is if someone was to connect an Ethernet/LAN cable from their wireless router to their laptop and in that way they couldn’t get kicked off the Wi-fi network?? Or am I wrong??
On your computer, go to your device manager and see if you have a PORTS option,click on that to see which com channel you are supposed to use (default I believe is COM 3) if there isn't a PORTS option then you have the wrong USB drivers installed. See, most of these MCUs come UNFLASHED and you won't be able to flash the deauth BIN file without the proper USB drivers and NO Windows will not automatically find it. I had to install Python27 on my system just to get the proper drivers on mine. If you still need help I can find the video I found to set this up. This other info about unplugging and plugging it back in won't matter if you don't have the proper drivers.
On your computer, go to your device manager and see if you have a PORTS option,click on that to see which com channel you are supposed to use (default I believe is COM 3) if there isn't a PORTS option then you have the wrong USB drivers installed. See, most of these MCUs come UNFLASHED and you won't be able to flash the deauth BIN file without the proper USB drivers and NO Windows will not automatically find it. I had to install Python27 on my system just to get the proper drivers on mine. If you still need help I can find the video I found to set this up. This other info about unplugging and plugging it back in won't matter if you don't have the proper drivers.
No, but you typically need to use a deauther to use a EvilTwin successfully, because you want the client to disconnected so it’ll connect to the EvilTwin
![[Live สด] การออกรางวัลสลากกินแบ่งรัฐบาล งวดวันที่ 16 ธันวาคม 2567](http://i.ytimg.com/vi/dNTiBBthKgQ/mqdefault.jpg)
2 years later and this thing still working. you had helped me a lot with my neighbours.
Lmfao
Me too i hate mine as well!
Help
@@Jeyhailio How can we help you, provide us with some information first
@@proxyhx2075 My esp8266 flashes when I press the flash button but then gets stuck on loading and always fails to flash properly. Do you know how I could fix this? I've installed the drivers many times already and done everything as shown but it doesn't want to flash.
after 6 years, Its still works PERFECTLY! Thank you for everything
Helo bhai reply me
@@Lyrics_Feeling_346 hello brother
Same here... Still works
Yea it's 4 am, and I remembered I did this around 7 or 8 years ago when it first was "getting hype" couldn't find the original video I watched found this, didn't know the password I used anymore only knew it was the base password and a number I added haha xD found the base PW in this vid and added my number I still had in mind , it still works xD even tho it's an early version
The way to fix the pwned not showing up is by doing all the same steps but change the frequency to 40. It worked for me thanks!
Also, I switched the USB to a different port and it appeared after. A USB 2.0 if you have it.
@@PilaPlanet mine dont work help me
Mine is showing up as farylink
usb com port fix how can i solve
@@chasedavis2358 mine dose to and when I connect to it it won’t let me access the web
Thank you so much for this video. I personally have been struggling to get it up and running until now.
This is so much better than studying the code from scratch. Thank you.
Am I the only one that just wants to bring this to school 😆
you can get arrested
And very illegal
@@Smellyfoot71 What are chances that they actually discover that he is jamming a school network? Like, none?
I did this already
And I got 20 out of 20 in computer lessons when I told them it was me. Note: A Year ago, I almost needed to re-do the class because I am a scrub with computers
ive been working on my board for 2 hours cuz i couldn't get it to work and then i watch this and find out that i needed the driver ty brov
Thanks, still works perfectly, didn't try deauth function, but if fake wifi points work, i suppose deauth will too. If anyone got troubles with password, it's ''deauther'' not in caps.
In case anyone wondered: "space huhn" means space chicken ("huhn" is German for hen/chicken, pronounced "hoon"). Great tut!
i got the driver , did everythig but the flasher don't detect the node mcu. What can i do??
Finally got it working. Great video this - appreciate it!
Could u help me please
You can also connect the Deauther to a power bank instead of your phone to power it!
We know...
What a bout a charger
@@najj71 same goes for that
Didnt work for me
Many people has published the same code, either with the uploader or with code to upload it throughout Arduino IDE but none of them explained hoy to use it or provide a confusing explanation, you explained it clearly and perfect, , thanks a lot for that!!!
HELLOOOO THANK YOU SO MUCH!!! THIS IS REALLY HELPFUL AND IT WORKS PERFECTLY.
I followed each step and it works, i love you
Excellent tutorial man!
Thanks!🍻
How didyou do man
You are the best! First tutorial that actually works!
i watch many videos but one from these is helpful for me and its your videos . really thanskful to you , you are amazing
ONLY TOUR METHOD WORKED TYSMMMMMMMMMMMMMMMMMMM!!!!!!!!!!!!
My Node doesn't seem to generate wifi. I can connect but cant go to the IP address in the web address bar because the pwned network isnt generating wifi? Help?
Great video, Thank You 🤩 👍🏻 Do you know if you can extend the Range of this board ? Like to work say a distance of 5-10 meters? If I soldered a thin piece of wire, maybe about a meter long onto the Aerial on the board ?
Any Help or advice appreciated 😁🤞🏻 Thanks Again 👍🏻
Thank you I tried this 3 other times with different walkthrough and none worked but this one
i have had so many problems until now! thank u so much, your video was easy to understand and most helpful.
You will have to change teh Hz from 80 to 40 because 2.4ghz supports 40hz not 80hz.. 80hz is for 5ghz wifi.
so thats why it didnt work! thanks
thx
how to change it can anyone tell?
Hello tech James, I have performed the download flash and I do see the lower green symbol on the left side, but I do not see the "pwned" on the wifi section. Am I doing something wrong?
i am confuse when you use the phone? is there any driver should i install first before using the deauth?
grate start for my upcoming project thanks.
what does it mean "very good quality cable" ?
A cable that can send power and data
How do i fix if my COM port is not showing?
same problem
Use a data cable maybe?
Owsm dude !! Finally its working
LOL no matter what I search for your name is always there xD you rock dude hahaha
i cant get on the attack website it says connection refused
Hibtech james you are a great teacher i followed all your steps but when i get the comport box up its on comport1 were yours is on 3 and when i press the flash button its not working its saying no wifi even though there is please please can you help me many thanks
did you find a fix for this?
my board is brand new and i exactly followed as you told but mine doesnt go beyond the flash step it just gets stuck there!
@Darrin Were you able to solve the problem?
@Darrin mine does the exact same and did you find out your issue?
Can i have a question.
I normaly connect to IP And than go to settings And set "hidden" than i reboot And i dont know how to connect to my pwned if IT not show.
Please help
Hello, congratulations on your construction. I'm doing one of these with a nodemcu, I2C 1306 display and neopixel led and buttons, but the led does not light up and the buttons on the same pins as yours do not respond, I use the spacehuhn deauther code, I cannot make it work, I am not good in code with arduino, could you help me? I already searched Aconfig.h, but I don't know what else to enable there to work. Thanks
Hi so I have accidentaly changed the bin file on how to open it. It opens with some notepad and just shows random numbers. Can you help me restore the way it opens?
Good day sir, why I can't connect to pwned network after I flashed? It says authentication problem. Do I need to connect the cable to my phone?
hi quick question if i download the deauther... file it shows up in a txt file. How to open it back to a bin...?
I got nothing written on the COM PORT. IS IT OK TO FLUSH, HELP ME OUT
Me too its annoying
Same
It's showing a ssid ( fairylink )when I plug with my laptop
you gotta flash it with the deauthorize firmware, but you gotta use the flash button which is tricky :plug it your computer, press the flash button and hold it down while unplugging the USB, release the button, then press down again while plugging it back.
your tutorial is so much helping thanks::))
How to solve the com 1 problem I don't get any other number
I just got one yesterday an it work for just a bit an when i got home from work, it doesn't work any more. Any tips on how to reconnect to it its not show up at all
Hey I flashed it but pwned network is not showing any help?
I live in Bangladesh. How many versions of the board can work with the files you provided ??
I'm stuck at 4:58 I can't seem to find my board it's a Wonolo ESP32, Internet keeps saying how easy it is to setup so far i've spent 4 days on this and still haven't got anywhere. I tried to reboot/reset, no joy
Hello! You have to change the cable you used, it wasn’t working for me however I used an old beats cable and it worked you should hear the connect sound when you plug ur esp in for it to work
after i start attack. it does not work and the network pwned disappears but my internet that i attack is still working. and the only way im able to get the network to comeback up is to reset the device
For me it only shows Com1, and when I try to flash it doesn't load the blue bar. Any solutions?
I just came back to this video at 6:20 AM in the morning, didn't sleep yet lol. I don't know how but I had the same problem on my brothers laptop, I somehow fixed it with drivers. I just downloaded some random drivers, intensely googled for a while and jammed some drivers in the a** of the laptop. Gave it a restart and bam a COM port appeared....
@@khalid311nt It doesn't work like that mate
PROXYhx restart what? The laptop?
Hey man great tutorial, once I hit flash the stop button popped up, however nothing was being downloaded to my ESP. The screen kept flashing require (gpio) and require (wifi). Any thoughts?
Under the operation tab: COM Port does it have a choice (ie COM3) if not then...On your computer, go to your device manager and see if you have a PORTS option,click on that to see which com channel you are supposed to use (default I believe is COM 3) if there isn't a PORTS option then you have the wrong USB drivers installed. See, most of these MCUs come UNFLASHED and you won't be able to flash the deauth BIN file without the proper USB drivers and NO Windows will not automatically find it. I had to install Python27 on my system just to get the proper drivers on mine. If you still need help I can find the video I found to set this up. This other info about unplugging and plugging it back in won't matter if you don't have the proper drivers.
@@mthewolf1095 Im having the same problem I have a choice of ports 3,4,5 on the flasher & only 3,4 on the pc. wqould you be able to find that vid please....
I bought this recently and I followed all the steps correctly once I plug the device in it comes up as "COM1" and I have no other coms to select and also when I click flash it doesn't even load or give me my mac please help
all you need to do is type COM3
@@Dr.Springer i did but it won't flash
Hello, right so when I plug my Jammer into my laptop and run the Nodemcu programmer nothing happens, I have tried different USB cables any help would be fantastic,
On your computer, go to your device manager and see if you have a PORTS option,click on that to see which com channel you are supposed to use (default I believe is COM 3) if there isn't a PORTS option then you have the wrong USB drivers installed. See, most of these MCUs come UNFLASHED and you won't be able to flash the deauth BIN file without the proper USB drivers and NO Windows will not automatically find it. I had to install Python27 on my system just to get the proper drivers on mine. If you still need help I can find the video I found to set this up. This other info about unplugging and plugging it back in won't matter if you don't have the proper drivers.
M TheWolf I need help
@@lorenz777 What's up?
M TheWolf buddy you’re paragraph helped me thank u so much
@@lorenz777 Anytime. I'm glad you got it working. Try out those other firmwares if you're bored.
thanks for this video help to acheive some working result
Can I cut the pins on the bottom and it still work????
yes but why? The interference will be much bigger so don't.
@@proxyhx2075 I hate the pins just sticking out
@@normallyashton I'm not sure if you are educated about electronics but the pins are used on a breadboard or just for soldering.
It's mainly used in Arduino projects. It is necessarily used with an Arduino (Nano?) which is the main component of the project, the brains of it.
Using it as a deauther is also possible and it doesn't require the data pins. You can't just snip them off either, I always buy mine off Aliexpress from a seller I know and trust very well and he always ships them with the pins stuck in plastic foam so they won't break/get damaged or stab you.
Just be careful using it in the open and try not to touch the ESP8266 (any sensitive/fragile electronics) with bare hands, an electrostatic discharge can kill it easily. That's why electronic parts you order online always come in antistatic packaging, in blue tinted translucent plastic.
@@proxyhx2075 CAN YOU TELL ME THE SELLERS NAME I WANT THE FOAM ON IT TOO
I have a question. I did all the step and it works but only on camera that have wifi. LIke phones and computer does not pop up at all. Can anyone help?
What's the difference between 1mb vs 4mb BIN file? Does it affect to more powerful deauthers?
how large the IPAP or de-authentication packets it sends
(IPAP = Internet Protocal Adress Packet)
whats the range of this. And is it trackable? Also thank you so much. This is by far the clearest and easiest tutorial on this topic.
Use a wifi extender
@@user-rj6ff8wu6x don't have one
I did the same procedure as you but I don't identify the door where I granted the nodemcu, what should I do? (I have windows 7 or must I have the 10)
door or port?, the flash tool needto work, no matter what windows it is
Hello, lets say i want to jam two or more wifi, Can i use two ESP8266 at the same time? How do i rename the default name from "pwned" to something else?
Yes,from the website
Question about getting a COM Port to appear...I don't see any options in the drop down. Any suggestions?
Same
It only recieves 2,4 ghz wifi networks, is there an solution or update so you can recieve the other networks too?
nope
The beacon attack works here, but the deauther stucks in 20 pkts and doesnt work, i tried with FIVE differents esp 8266, and differents acess points...
Please someone help for me it says com 1 how do I fix it
Mine says 8 help me too
Can I hook it up threw my android phone I don't have a pc??
Bro when I search the ip
There is showing the site can't be reached 😢😢
Please help me
Same
I changed the ssid and password.. But when I tried to connect. It does not work. Ssid is visible but I cannot access.. Can you help me this? Thanks
Hi. I don’t have that strange thing to connect it to android, how can I do it without it?
Not working for me :/ Deauth wont work on any Network but it says Attack is Active. Any fixes?
What is it doesn’t give me a COM???? Help
SAME
@thesourwarhead not getting COM even after drivers downloaded and run
@@septynigarsai did you get it working? What windows are you using?
Pawned network says @Log in to connect to the internet! when i click it hotspot log in window pop up with error 404 page not found!
I need to jam my workers' cell when they should be working, and they will not stop. Will this really stop them from using their cell? I hope so. Will the another person know who or what is jammin, and can I still be able to use me own wifi and internet?
You won't be able to use the wifi you're deauthing and you can get arrested for doing it in public places like your work or cafe, etc...
Working perfect thanks 👍🏼
Does it also capture handshake while deauth ? or if someone tries to connect to a cloned AP, does it capture the creds ?
dont think so - for that i would recomend you to use kali or parrot os and do it manually in the terminal
Would this work with NodeMcu V3 4MB flash ESP8266 12E?
Probably
Rất là tốt. Ở đất nước tôi họ hát karaoke sáng đêm. Cám ơn bạn rất nhiều.
I have a very curious problem, I managed to make it work as you showed in the video, also when I do the attack, all my mobile devices within my network are disconnected (it works). But even though the attack is on and all my mobile devices are disconnected, my laptop can still use the internet. Is this because it has more power to connect or something like that?
@R R ohh, thanks for the information, with reason with some devices if it worked and others not.
does it work when connected to ethernet cable?
the wifi password is : "deauther" with small letters
Thx
Thanks also.
Mine is not working help
@@chribbe68 mine is not working help
@@archerystevens8824 help me
Can I reuse it normally after using it as a jammer.
Yep just upload another sketch from arduino ide
Mine nodemcu jammer works 5 minutes,then restart, whats the problem?
It's showing. Unable to connect this network
Will this affect a neighbor's ring cameras?
can a wifi camera connected to a wifi network be blocked and how?
Blocked as in what exactly? If you have network connectivity to that network (if a SOHO router or ISP gateway) you could just block the device in the parental control functions, if you mean disconnecting it from WiFi you would need a evil twin and deauther , or a wireless jammer
SOS Idk mine is wont show the ip does it need to be plugged in
I reacently bought it i followd the steps but still get COM1
same, did you find a solution? Lmk cuz It will help a lot.
I just came back to this video at 6:20 AM in the morning, didn't sleep yet lol. I don't know how but I had the same problem on my brothers laptop, I somehow fixed it with drivers. I just downloaded some random drivers, intensely googled for a while and jammed some drivers in the a** of the laptop. Gave it a restart and bam a COM port appeared....
how to make public concern for protection against this. What are the possible or initial steps to protect wifi against this attack?
the purpose of this project is to make people realize that u need to upgrade your router and yet some jackass like this guy promote it as WIFI JAMMER even though the creator in the term of service specifically say dont refer to this project as wifi jammer (its pretty good for pranking your friend or getting someone fired tho)
A COM port number is not coming up for me. Can someone help me?
UPDATE: I've got a COM number. Lol. But now when i hit Flash it starts to load then i get an error. (Rather than the bottom left circle staying Green, it turns to a red - a moment or so after i hit flash.
Any suggestions.????
@@khalid311nt same
Heyy whats the range of this thing
30 meters if so
What’s the difference between the 1mb version and 4mb version of the flash file?
Same thing I'm trying to figure out
@@starchildx1063 how large the IPAP or de-authentication packets it sends
(IPAP = Internet Protocal Adress Packet)
how to block those things that is using deauther app coz it seems someone trying to cut off my wifi. i need it for my online class. i hope there is a solution also .
Use 5ghz wifi it wont work on 5ghz!
Whats the difference between the 1mb and 4mb downloads?
Apart from the size obviously lol
how large the IPAP or de-authentication packets it sends
(IPAP = Internet Protocal Adress Packet)
Surely a way to overcome this is if someone was to connect an Ethernet/LAN cable from their wireless router to their laptop and in that way they couldn’t get kicked off the Wi-fi network?? Or am I wrong??
You're right
ive only got com 1 whats wrong? could it be the lead?
On your computer, go to your device manager and see if you have a PORTS option,click on that to see which com channel you are supposed to use (default I believe is COM 3) if there isn't a PORTS option then you have the wrong USB drivers installed. See, most of these MCUs come UNFLASHED and you won't be able to flash the deauth BIN file without the proper USB drivers and NO Windows will not automatically find it. I had to install Python27 on my system just to get the proper drivers on mine. If you still need help I can find the video I found to set this up. This other info about unplugging and plugging it back in won't matter if you don't have the proper drivers.
M TheWolf hi, all I had to do was swap the usb cable. it was just a simple fix, thanks for the tips.
@@mthewolf1095 can u help me plz, I have the same problem
@@mthewolf1095 Hey, can you link me to that yt video? Thx
cool! what's the range?
Hello, will this work on a I-phone? thanks
I follow the tutorial, but the pwned network isnt there
gg dude
On your computer, go to your device manager and see if you have a PORTS option,click on that to see which com channel you are supposed to use (default I believe is COM 3) if there isn't a PORTS option then you have the wrong USB drivers installed. See, most of these MCUs come UNFLASHED and you won't be able to flash the deauth BIN file without the proper USB drivers and NO Windows will not automatically find it. I had to install Python27 on my system just to get the proper drivers on mine. If you still need help I can find the video I found to set this up. This other info about unplugging and plugging it back in won't matter if you don't have the proper drivers.
192.168.4.1 CAN'T BE FOUND BY MY PHONE OR CUMPUTER , DOES ANYBODY KNOW WHAT TO DO?
Try manually entering your SSID from the command prompt.
connect to it first if it cant find reflash
What is the max range this will work? thank you
hey is the flasher download only for Mac? im trying to flash this with a Mac
Evil twins and deauther are unseparated, must be collaborated in operations, right??
No, but you typically need to use a deauther to use a EvilTwin successfully, because you want the client to disconnected so it’ll connect to the EvilTwin
They can be separated, as you could just use a deauther by itself