You adjusted the ride height with the use of styrene behind the rim!! Easy and clever at the same time. Solid and clean build. Great job done. Thanks for sharing, take care and keep up the good work.
I'm also build this car model as well, but pretty much beginner with limited tools and stuff. Was planned to put Aoshima Hayashi 14" wheels but unfortunately, those wheels are too wide for this model and also incompatible hub which Tamiya uses male hub while the rest of car model brands uses female hub. Later, I managed to put those wheels into my Silvia tamiya model but eventually ended up having to convert from being static car model into movable toy car which not safe for children below 10 due to small parts that can be fallen off so easily. I had to cut off entire suspension system including brake discs and then drilled 4mm diameter at the front to install the wheel shaft. ABS rods also applied to adjust the shaft installation hole so it doesn't wobble so badly. Then I applied another pieces of ABS rods to create customized suspension system to allow installation of wheel shaft at the back and the result is amazing. To build the wheel shaft, any 2mm plastic rods or stainless steel rods can be used, as long as these rods can fit the wheel hubs.
Hi, I suggest that if you want to use 14 rims, you should choose the word shortrim on the front of the box, it's not too wide. Otherwise, the inner wheel must be cut off.
I have the same kit and I'm thinking how to lower the ride hight. I bought some aoshima 18" rims, but without modifications they won't fit. I find the standard rims too dull
hey! I finished my Nissan Silvia and I admit I used your model as inspiration :) although it's not as good looking as yours, I am satisfied on the result. I think it looks better than standard version. If you're curios and have 1 minute spare, you can check it on my channel :)
Hello, thank you very much for your interest in our work and following. Don't worry, I'll be happy to answer as far as I know. You can order online from website hobbylinkjapan by searching here the car is a tamiya "1/24 Nissan Silvia K's S13" and wheels "1/24 e'quip aoshima" enjoy the model. Bring your work to share.
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
シルビアのかっこよさを更にレベルアップしてるし。このプラモも。本物のシルビアも欲しくなります😍好きなドレスアップスタイルだ!（笑）
Esse estilo old School é tão lindo ❤️
Wow I really like this outcome, you should paint the seats red and throw some bozozoku pipes
Thank you for watching. Bozo is on my list. 😅
You adjusted the ride height with the use of styrene behind the rim!! Easy and clever at the same time. Solid and clean build. Great job done. Thanks for sharing, take care and keep up the good work.
Thanks 👍🙂
Dude!! I have been waiting for someone to do a channel like this for Years!! AMAZING BRO🤟🏾✊🏾💪🏾
Thanks 😊
Very nice work. Thanks for sharing.
Thanks 🙂
I kinda love making/building things, but I have never built a "toy" car, I love your work!
Dude it’s not a toy it’s a model car 😅
@@Jeremy21084 Yeah, I didnt know how to say that, that's why i said "Toy"
@@official_Quube aah ok.
sry if i soudnded rude!
@@Jeremy21084 no worries
@@official_Quube haha ok!
Awesome build, simple yet effective, very nice!
only thing I would have done different was panel line the body 👍
So great job.
I'm also build this car model as well, but pretty much beginner with limited tools and stuff. Was planned to put Aoshima Hayashi 14" wheels but unfortunately, those wheels are too wide for this model and also incompatible hub which Tamiya uses male hub while the rest of car model brands uses female hub.
Later, I managed to put those wheels into my Silvia tamiya model but eventually ended up having to convert from being static car model into movable toy car which not safe for children below 10 due to small parts that can be fallen off so easily. I had to cut off entire suspension system including brake discs and then drilled 4mm diameter at the front to install the wheel shaft. ABS rods also applied to adjust the shaft installation hole so it doesn't wobble so badly. Then I applied another pieces of ABS rods to create customized suspension system to allow installation of wheel shaft at the back and the result is amazing.
To build the wheel shaft, any 2mm plastic rods or stainless steel rods can be used, as long as these rods can fit the wheel hubs.
Hi, I suggest that if you want to use 14 rims, you should choose the word shortrim on the front of the box, it's not too wide. Otherwise, the inner wheel must be cut off.
Very nice model!!
Thank you :)
Nice 👍❤️❤️❤️
This guy is way better than juns mini garage 💯
Both have crazy skills
I'm just a newbie in assembly. cannot be compared to him. He's so good :)
stock body little wheels, classic
Thank you. I love this style 😀
Nice build 🤛🏻👍
Thank you 😀
90s Love
Great work ! Where can I find the different decals on the windows? Thanks 👏🏻
Love this old style.. Could You make a old school like this for the Eg coupe/ EJ1
Thank you. If I can find a model 😅
@@BRscalegarage okay if you can that would be awesome. It’s a dream car of mine(I’m aware it’s a shitbox)
Your attention to detail is 10/10, my man! How long have you been building kits?
Hello, thanks for the feedback. I took 15 days of free time to make this car. :)
Maravilhosa miniatura 😍😍😍😍
Thank you :)
Thin the paint a bit more and lower the airpressure a bit, it will flow better, noticed while you were painting the black around the window edges.
Thank you very much, this is my first time using an airbrush. 😅
@@BRscalegarage well then your off to a great start. Love your work, great job
前後のライトの内側に、ハセガワから出ている、ミラーフィニッシュを貼ると良いですよ。
What spray paint do you recommend?? And can you use any?
Can't go wrong with tamiya spray paint,
They make a bunch of colours
If you start Recommend using tamiya spray paint. But if you do it often, an airbrush is recommended.
Bruh u deserve more subs
Thank you so much :)
this shit hard asf ma boa keep it up
Nice bro👍
Thank you bro :D
@@BRscalegarage can we be friends😀
Ok 😀
@@BRscalegarage My friend, your channel is already on my channel Featured Channels
@@sl-hobby9275 oh! Thank you :D
awesome build bro! Just a question, what is the diameter of those 1:24 14 inch rims?
Around 1.7cm
This is freakin awesome!! Especially the rims!! Question? What do you do when you accidentally put paint in an area that wasn’t suppose to be? 🤙🏽🤙🏽🤙🏽
I need to wash the paint with paint remover which depend on what type of paint that I used.
@@BRscalegarage thanks brotha!!!
For the clear red and yellow paint, did you use acrylic or enamel?
Enamel
I have the same kit and I'm thinking how to lower the ride hight. I bought some aoshima 18" rims, but without modifications they won't fit. I find the standard rims too dull
Adjust the car to lower it a bit. There are several ways to lower the car. But for me this method is quite easy for me. Let's go :)
hey! I finished my Nissan Silvia and I admit I used your model as inspiration :) although it's not as good looking as yours, I am satisfied on the result. I think it looks better than standard version. If you're curios and have 1 minute spare, you can check it on my channel :)
NICE HOW MUCH IT COST
My B4 wont glue into its place, i am using extra thin cement any suggestions?
Still needs a bit more detail. 8.5/10
Thank you 🙂
Where’s the videos of your builds?
i want to build this car, can you tell me what paint are you use?
- TAMIYA Surface Primer white spray
- TAMIYA TS-17 Gloss Aluminum spray
- 1k clear coat - ( First time using an airbrush )
Hey i just subscribed, sorry to be annoying but where do I get this? I would really love to make one
The wheels as well😞
Hello, thank you very much for your interest in our work and following. Don't worry, I'll be happy to answer as far as I know. You can order online from website hobbylinkjapan by searching here the car is a tamiya
"1/24 Nissan Silvia K's S13"
and wheels
"1/24 e'quip aoshima"
enjoy the model. Bring your work to share.
@@BRscalegarage thank you so much🙏🏽
Where are the decals from? I mean those you applied on the windows
The decal comes from the wheel box. and some from gx71 fujimi Tohge series :)
Thank you :)
Where can I buy a already built one?
what size wheels?
14inch
Where can I get that window template
Search zoomonmodel you can buy online
Bro can you make the GTR R34, R32 or the Supra MK4?
R32 is on my list :)
@@BRscalegarage the NISMO version?
@@chrisbenson15 Yes, but not nismo wheels, not sure if i can make it this year.
what is the sand papers for
What if we don't use primer 🤔
The color may not adhere well to the skin. When applying masking tape, the color may peel off. It means the body.
Hi bro where can I get custom wheels for 1/24 model car
eBay!
Where do you get your models
I got it from the shop tamiya dealer in my country :)
@@BRscalegarage damn I really wanted to try and do this
Let's do it!
what glue are u using ??
Tamiya craft bond 😊
@@BRscalegarage i tried the tamiya thin cement, but it drie so fast and fall apart .....how strong are the bond on this one?
Cómo se llama la marca donde lo compras
Bro what is the wheelbase of this car?
расшивка: ну да ну да пошла я на .....
Still waiting for the wheelbase 😐
Sorry, can't check right now. Because of this model, I sold it to someone who collects it. sorry for late reply 😰
@@BRscalegarage so you can ask him right?
I'll try asking. If I get an answer I will inform you. 🙂
@@BRscalegarage ok 👍🏻✌🏻
Anyone know the wheelbase of this car
буцті українь у районі тульчин село тарасівка на айеродром прейицті зданнияа робити для всього будуваті
буцті українь у районі тульчин село тарасівка на айеродром прейицті зданнияа робити для всього
What do you use to stick the lights?
Tamiya craft bond