Beautiful. So delicate, I love the calm ambience. The Nissan skyline is my boyfriends favorite, and although we couldn’t afford a real one, I want to gift this to him for Christmas.
Excellent work.. still have to tackle mine but after seeing how beautiful it can be done I'm happy I bought it ! Thx for great video and I like the music too!
Just got this model . It will be my first car model . Kinda scared from the small parts on the engine because i have big fingers 😂 . Good build my friend 👍
I'm new to building model car, can I use brush to paint the whole car body then polish it instead of spraying paint? cuz I don't have an appropriate place to spray
Use Tamiya lacquer paint spray cans and spray outside on a large sheet of paper or clean dust-free cardboard, only spray when the wind is very low, or dust will be stuck on the wet paint. Do not use a brush to paint the car, it will be very ugly.
Thank you for comment :) The advan neova concept rubber pattern has one side like ad08 15:04 , I didn't put it on the wrong side at all. This tire will be worn the same as r888. But the tires were not created in the right direction. So look that I put it upside down
The normal box doesn't have nismo accessories such as steering wheel, brakes, decals, exhaust,air duct so you can see pictures from the website above. 😊
@@BRscalegarage i never used a waterslide before. Another question hehe. On the dashboard, do you use a topcoat or not? Before applying the decal, does the surface needs to be topcoated or not?
maybe isn't perfect but looks great too as the one in Initial D from the Night Kids that challenged Takumi's AE86 in the downhill of Mount Akina but lost due to brake overheating
So I’m pretty new to this stuff and was considering buying that exact kit but I have a few questions: 1. What tools do I have to buy to assemble the kit? 2. Do I need to get paint for it? 3. How long did it take to assemble it?
Tamiya TS code spray cans (lacquer) are very good for model cars. Shake the can VERY well before spraying, spray in a well ventilated area with low dust in the air, and hold the can back 8 inches. Move the can fast from side to side, do not move across the car slow, you will get too much paint built up and it will run in drips down the car. Do a light coat first, it will not cover the car completely. Then wait 10min and do another coat, a little heavier this time. Then wait 10 more minutes and do a final coat. Wait 1 day before spraying clear coat and do 3 coats of clear coat the same method as the paint, light coat first, then two medium coats, all 10min apart.
Hello! The engine work is fantastic! You said that you had 3D printed engine parts - where did you found those? Is there a website with the blueprints for car models? I have a 3D printer so it would be fun to play around! Thank you :)
This kit was the first I bought. It's still in the box 10+ years later. 😅
Guess I'll have to build it finally!
Nice work! 👌🏻
Oh, keep it for a long time if the decal is still in good condition. Build it, have fun with the model.
Beautiful. So delicate, I love the calm ambience. The Nissan skyline is my boyfriends favorite, and although we couldn’t afford a real one, I want to gift this to him for Christmas.
I just bought this kit . I was looking forward to building it but I know it won't turn out as good is this . Magnificent build
Glad you like it!
Looks great. Engine work is top notch. Something to be proud of.
Thank you :)
Love the resin upgrades! its nice to see. I use resin engines in most of my builds, axles, batteries and anything else available. Great work!
Thanks you 😊
My R32 just arrived few days ago, this a nice video for my guide for assembly the model.
Enjoy it
Excellent work.. still have to tackle mine but after seeing how beautiful it can be done I'm happy I bought it ! Thx for great video and I like the music too!
Thank you 😀
You have more talent in 1 hand than I have in 2👍👍👍
Thanks you can do it 😊
Just got this model . It will be my first car model . Kinda scared from the small parts on the engine because i have big fingers 😂 . Good build my friend 👍
Thanks for watching 😊
A Molotow chrome pen would have been great for the headlight bezels.
Thank you for watching. I'll try to follow your suggestion in the next video 🙌
I think it turned out pretty good! Merry x-mas and new year to you too bro! You have a lot of potential!
Thank you for following my work. 😅🙂
Great job man I see no mistakes here it looks amazing
Thanks 👍
That engine is looking good that's a top notch, yeah.
thanks for this great vid, first time building model cars😁❤️
i recently bought this kit and am looking around for inspiration. this was a good build.👍
Thanks 😊
Curious to know where you got the turbo manifold and if you made it yourself do you sell them
Why you polished with sandpaper the factory coat instead to cover it by primer?
So that the primer adheres better than before
That's A AWESOME BUILD..💯💯💯🥰
It's awesome brother, wow👏🏼
Thanks 😊
Just got mine, but the A pillar is bend n have stress mark. How to fix this?
You can use a hot blow dryer to bend it and insert the window to make sure it is attached to pillar. But do it carefully.
@BRscalegarage thanks for the information. Really helpful
Aside from the backwards tires on the one side, this gets me psyched to work on mine
What kind of airbrush setup do you use?
Sparmax 3 and no brand airbrush
hey i'm sorry for the beginner question, but do you primer your engine parts before painting them?
for long-term color adhesion It is best to use a primer. ✌
I'm new to building model car, can I use brush to paint the whole car body then polish it instead of spraying paint? cuz I don't have an appropriate place to spray
Using brush for painting the body might create uneven surface. It's better to us spray tools for model kits. 🙂🙌
Use Tamiya lacquer paint spray cans and spray outside on a large sheet of paper or clean dust-free cardboard, only spray when the wind is very low, or dust will be stuck on the wet paint. Do not use a brush to paint the car, it will be very ugly.
Keep going bro cant wait for the next cars
Thank you very much.Next one is coming:)
Looks great, can I ask what PSI you generally airbrush your primer, colour and clear coat on?
Looks amazing, great job 😊
Thanks 😀
Looks AMAZING 👏 🥰🥰🥰💯💯💯
Thank you 😊
Did you color rear lights (mine set got colorless so i am kinds worried about how i should paint them with red to not make them look bad)
Use Tamiya clear red paint or a red sharpie marker. Apply the paint or marker to the backside of the brake light lens.
Nice work 👍, do make and R34 not GT-R?
z-tune is on the list
@@BRscalegarage not z-tune, how about hr/er/enr34?
Of course I would do er34. 😊
@@BRscalegarage nice!👍
Looks really nice, but tires are installed backward :D
Thank you for comment :)
The advan neova concept rubber pattern has one side like ad08 15:04 , I didn't put it on the wrong side at all. This tire will be worn the same as r888.
But the tires were not created in the right direction. So look that I put it upside down
Should i buy it if i have no experience in assembling and painting?
i recommend tamiya silvia s13
Awesome video!
Thank you :D
hello where can i find this single turbo kit?
How do u make the corner of the headlights orange
This looks insane!
I would love to build one on my own but I dont even have the needed colors
Do u happens to know the difference between tamiya r32 and tamiya r32 nismo custom?
The difference between these two boxes, you can see the details of the nismo boxes.
www.tamiya.com/english/products/24341/index.htm
@@BRscalegarage couldnt really notice the difference hehehe
The normal box doesn't have nismo accessories such as steering wheel, brakes, decals, exhaust,air duct so you can see pictures from the website above. 😊
@@BRscalegarage i never used a waterslide before. Another question hehe. On the dashboard, do you use a topcoat or not? Before applying the decal, does the surface needs to be topcoated or not?
@@noname-pv8lw You can use tamiya x-22 to coat it, for me didn't use it.
Nice job 💯👍
Thanks 💯
What is that glue you are using for the tailights and headlight
Tamiya craft bond
maybe isn't perfect but looks great too as the one in Initial D from the Night Kids that challenged Takumi's AE86 in the downhill of Mount Akina but lost due to brake overheating
Thank you for watching. I admitted there are still some mistakes that need to fix. I'm also Takumi's fan too 🙂
Salut my friend super car super video subscribe subscribe ..
Thanks my friend subscribe subscribe
👍👍👍👍
I have this Tamiya model and I have been trying to find engine parts for the engine bay. Anyone know where to find them?
maybe you kit is not the car with the engine bro
What glue did you use for the headlights?
Tamiya craft bond bro 🙂
what type
custom wheel u use?
Resin
Wow that turbo's
So I’m pretty new to this stuff and was considering buying that exact kit but I have a few questions:
1. What tools do I have to buy to assemble the kit?
2. Do I need to get paint for it?
3. How long did it take to assemble it?
1.Glue; Tamiya extra thin cement, Tamiya craft bond(for transparent parts), modeler's side cutter, sand paper, tweetzer , art knife.
2.You do need to get paint.
3.At lesast 2 weeks.
Hope you enjoy making it :)
What can u suggest if on budget,like does the cans spray paints good or not?
Tamiya TS code spray cans (lacquer) are very good for model cars. Shake the can VERY well before spraying, spray in a well ventilated area with low dust in the air, and hold the can back 8 inches. Move the can fast from side to side, do not move across the car slow, you will get too much paint built up and it will run in drips down the car. Do a light coat first, it will not cover the car completely. Then wait 10min and do another coat, a little heavier this time. Then wait 10 more minutes and do a final coat. Wait 1 day before spraying clear coat and do 3 coats of clear coat the same method as the paint, light coat first, then two medium coats, all 10min apart.
Hi, how much is the percentage of acrylic paint and thinner you use for airbrush? Thank you
Hello Davide giorgini. I usually mix color 1 thinner 1.5 😊
The ratio is not fixed. I mix and test before spraying.
I got one, still haven't built it yet, cause it uses the special glue for it
Hello. Did you 3D printed the engine parts or all the parts were in the box?
All the parts were in the box
Decent looking shelf model. Well done.
Where did you get the top mount single manifold ??
Thank you. I bought from my country. I'm not sure if they send to foreign countries or not. 🙂
Very good!!!
its amazing
did you go from 4000 wet sanding straight to polishing compound?
Depending on your skin type, you can use 4000 to finish at 10000.
What sand grit sandpaper do you recommend on start to finish?
@@miguelleal1829 For me, recommend Godhand GH-KS5-KB. There are numbers 2000-10000.
Usually used before polishing, I use number 4000,6000,8000. 🙂
@@BRscalegarage what do you recommend on scale model 1/24 HKS GTR from tamiya
@@miguelleal1829 Have fun with the decal. 😄
Hello! The engine work is fantastic! You said that you had 3D printed engine parts - where did you found those? Is there a website with the blueprints for car models? I have a 3D printer so it would be fun to play around! Thank you :)
Hello Damian Sorry for late reply, 3d work I bought from my country. But you can look it up on cults3d, I see some files are available for sale.
@@BRscalegarage thank you for your reply and keep up a good work 💪💪 greetings 😊
How do make car like shining?
did u 3d print the parts¿?
So cool😍
Thank you :)
TOYOTA SUPRA PLEASE
You should be proud of the model can’t wait for the next build have a look at my channel am up loading a 1/24 scale lorry build never built one before
Thank you. Build it. I want to see it when it's finished. :)
🔥🔥🔥
No you did good bro, If only you've seen the real GTR its all dinged, scratched and dented all over! Hahaha!
Glue name pls
Tamiya craft bond 😀
14:07 у тя амортизаторы не правильно стият
i don't really like the fitment
I will come back to build another new r32 soon. 😅
This fucking tomato tamiya car costs 200 dollar
What is that white glue pen thing you use?
Tamiya craft bond