I used this controller to build DIY lawn mower using wheelchair motors 4x . But dont know yet how to install switch to cut off gasoline engine / kill switch? Which chanels and lever or switch us and what accessories needed to attach to receiver? Kill switch on petrol motor need to short 2 wires. Next project is with diesel motor and similar solutuion needed but with diesel is different so I need some servo or accutator. Any idea or advice here?
Can u please twll me the first 2 wires you are putting into the reciever? What they are ? I have this controller and reciever and am not sure what the wires are your initially connecting...cheers
I was wondering if this remote can make the motor spin counter clockwise using any button with throttle . I want to apply for my boat which i like the lock throttle fucntion . But i also would love to make it reverse (CCW) and Foward (CW)
I have a f163 wolf helicopter but suddenly remote control is broken because a battery acid damaged..this remote is compatible to my helicopter for replacement?
Very good. Do you know how to reset the center point? Or it resets when you power off? I have counted 24 steps so to center i can count 12. This is for first install of servos.
hl que tal podrias aser un video tutorial de como enlazar cln el receptor es que no me da la señal para ensender almenos el motor y almenos un servo y nada ayuda xfa
Hi, I have not much experiences in RC plane but channel 6 only have 2 level so I think it's not detail enough for flaps. channel 5 with 3 levels maybe better
Yes. I have here a tutorial for making a rc car from die-cast car using MC6C: th-cam.com/video/2hYdm_yxtfM/w-d-xo.html (if you don't have an ESC) and another demo with ESC here th-cam.com/video/hYDtW29BTBY/w-d-xo.html
Yes. You can. The diff vs ch.1, 2, 3 and 4 is you only have 3 state on CH.5: 1000, 1500, 2000uS instead of various value from 1000 to 2000. So you brush motor will only able to run “max speed”, “stop” and “max speed reverse”
I plan to buy a TX double mid-hand to build my bulldozer for 6 channels. Ch 2 & 3 will control the track crawlers. Ch 1 to control the rear ripper lower & rises. Ch 4 to lower & rise the front blade. Ch 5 to tilts forward & backward front blade. Ch 6 for lights. Is it ok for this TX double mid-hand friend? Thank for your advice 🙏
I have a video about camera car, in that video, I've used two 360 degree servo to control an arm with camera on it. It may similar with a turret. search for that video on my channel
Usually people power the Receiver by the ESC so the it more depend on the support Voltage of the ESC. But if you don't use ESC, as I remember the voltage range is around 3.5 to 7.4V, so it should not be used with 3s battery.
great video helped me a lot. I just bought one of these 😄✌️
Thank you very much, too easy to set the control for beginners.
Thank you very much again
Glad my video is useful for you :)
What kind of cable to use it as a simulator controller?
I used this controller to build DIY lawn mower using wheelchair motors 4x . But dont know yet how to install switch to cut off gasoline engine / kill switch? Which chanels and lever or switch us and what accessories needed to attach to receiver? Kill switch on petrol motor need to short 2 wires. Next project is with diesel motor and similar solutuion needed but with diesel is different so I need some servo or accutator. Any idea or advice here?
Can u please twll me the first 2 wires you are putting into the reciever? What they are ? I have this controller and reciever and am not sure what the wires are your initially connecting...cheers
That is 5V power supply for the receiver.
Hello, thanks for the video ! I'm a total newbie, do you know how to connect the controller to the simulator with that simulating port ?
I was wondering if this remote can make the motor spin counter clockwise using any button with throttle .
I want to apply for my boat which i like the lock throttle fucntion . But i also would love to make it reverse (CCW) and Foward (CW)
not brushless motors
get a FRW and REW speedcontrol ESC
Bonne radio , fonctionne parfaitement .Merci
@Simon Zhu oui tout à fait !
what's the difference from Right-MC7RB and Left-MC7RB?
So how do you reduce the max speed for auto/car type ?
I have a f163 wolf helicopter but suddenly remote control is broken because a battery acid damaged..this remote is compatible to my helicopter for replacement?
How do you set the transmitter to bind mode to bind to a different type of receiver?
Very good. Do you know how to reset the center point? Or it resets when you power off? I have counted 24 steps so to center i can count 12. This is for first install of servos.
Beep sound at center point is differ. Center point will not reset when power off.
Tell us how to connect it to a phone and laptop please
Hello, can we connect a 5v dc motor regulator to the receiver?
can you use this controller to controller other flight controllers? or does it only work with the one included in the box?
hl que tal podrias aser un video tutorial de como enlazar cln el receptor es que no me da la señal para ensender almenos el motor y almenos un servo y nada ayuda xfa
I'm getting a 3 axis gyro and I have flaps so I was wondering if you would set the gyro to channel 5 and the flaps to channel 6?
Hi, I have not much experiences in RC plane but channel 6 only have 2 level so I think it's not detail enough for flaps. channel 5 with 3 levels maybe better
Ok thanks
Can use this for rc cars?
Sure. But it's a bit hard to control than a car controller (like Flysky - FS-GT2E)
@@TheHLab do you have a video tutorial ?? I want to try....
Yes. I have here a tutorial for making a rc car from die-cast car using MC6C: th-cam.com/video/2hYdm_yxtfM/w-d-xo.html (if you don't have an ESC) and another demo with ESC here th-cam.com/video/hYDtW29BTBY/w-d-xo.html
Hello friend, about channel 5, can we use it to control 360 degrees servo or brush motor with ESC?
Yes. You can. The diff vs ch.1, 2, 3 and 4 is you only have 3 state on CH.5: 1000, 1500, 2000uS instead of various value from 1000 to 2000. So you brush motor will only able to run “max speed”, “stop” and “max speed reverse”
@@TheHLab thank friend. So I don’t even need to have ESC for the brush motor right?
I plan to buy a TX double mid-hand to build my bulldozer for 6 channels. Ch 2 & 3 will control the track crawlers. Ch 1 to control the rear ripper lower & rises. Ch 4 to lower & rise the front blade. Ch 5 to tilts forward & backward front blade. Ch 6 for lights.
Is it ok for this TX double mid-hand friend?
Thank for your advice 🙏
sir, how to turn on/off gyro on 7ch receiver?
It is 800 meter distance
Yeah. In theory, but I haven't tested yet
@@TheHLab q
life saver
Thank you
How to bind tx mc6c.pls!
Do you have a M-Bus Protocall detail or not 9600 8 non 1 or what I want to mapping with PLC
Hi, I don't know much about PLC.
You sara😮
Hot to reverse sett all receiver and rebinding
Hii.. can ch1. Ch2.ch3 n ch4 forward n reverse 360 degree. What type motor servo u used... Is it 180°or 360°. .. i would apply for turret movement.
Yes. CH.1 to CH.4 can work with both 180 and 360 degree servos (forward & reverse). In my demo, it's a 180 degree servo.
I have a video about camera car, in that video, I've used two 360 degree servo to control an arm with camera on it. It may similar with a turret. search for that video on my channel
where is the s-bus port from the receiver?
The last one, with text M.BUS
@@TheHLab So it works on sbus or mbus?
Is it the right hand or the left hand? I want to buy there are two options, I don't know
Please answer
throttle is in the left hand
Ok thanks
@@xoxo-zv6ri be careful. You can find right and left handed. When you see right handed it means the throttle is in right side.
@@lucianadrian88 ok thanks for telling
Can i know where i can buy simulating cable for this?
I haven't try the simulation yet. But i think you can search for online, ex: ebay.com or aliexpress.com
Hl y para enlasar el simulador como es
Where did you buy?
I bought it from online shop. You can buy it from aliexpress.com
Va bene per i droni grazie mille
how to reverse the rotation ni brushless motor
Swap any 2 wires in the motor cables
1km 💪
Can i use 3s battery
Usually people power the Receiver by the ESC so the it more depend on the support Voltage of the ESC. But if you don't use ESC, as I remember the voltage range is around 3.5 to 7.4V, so it should not be used with 3s battery.
No pude hacerlo funcionar
Where avelable
FRAUD company fake claim I bought mc6 mini it says connect to pc for simulation by aux but nothing hapoens my money waste
You probably don’t know what your doing. Either bought the wrong cable or you don’t have the proper driver installed
What a pity the human voice is so abhorrent, far better to waste the audio saying nothing.