Just got it, installed it and LOVE it. Did wait 90 seconds before starting - no problem with Sport mode. Intakes and 1+ map are next! Thanks guys - great product!
I just installed my COBB Stage1 tune on my 2018 MACAN Turbo, It said successful, however I cannot access the SPORT and SPORT+ modes. Did I do something incorrect?
Just drive for 15 minutes and they'll come back on. If you watched our video, we mention not starting the car for 90 seconds after completion for that reason. The car does some adaptive learning and if it's interrupted, it delays that process for the sport/sport+ modes.
Hey I am driving a macan turbo 2017 with the cobb tuning accessport with your protune map but after a week i was experience that i was loosing turbo pressure so i have ordered your diverter valves from go fast bits but after installing the valves i keep having the same problem ?
Can you grab a log of this and send to info@flat6motorsports.com? We can talked a look. Also check the charge pipes and clamps around the throttle body.
We achieved +26hp and 49ft/lb of torque to wheels over the OTS map. flat6motorsports.com/collections/macan-ecu/products/flat-6-motorsports-custom-cobb-pro-tuning-macan-s-gts-turbo
Just got it, installed it and LOVE it. Did wait 90 seconds before starting - no problem with Sport mode. Intakes and 1+ map are next! Thanks guys - great product!
Thanks for the video, just installed the Cobb Stage 1 for my Macan.
Should you need more power: flat6motorsports.com/collections/macan-ecu/products/flat-6-motorsports-cobb-stage-1-macan-s-turbo
If I buy this device pre owned will it work on my car, ? Or will it only work with one VIN number per device
Yes. You can buy one, just make sure that its "unmarried" to any car that was previously used.
So the tuner comes installed with the stage 1? Or you only send the tune file after purchasing the tuner?
It comes with the Cobb Stage 1, 2 and 3 maps. We offer an additional map called the Stage 1+.
Do you leave the cobb connected once is installed/configured or no need?
You do not need to leave it plugged in.
I just installed my COBB Stage1 tune on my 2018 MACAN Turbo, It said successful, however I cannot access the SPORT and SPORT+ modes. Did I do something incorrect?
Just drive for 15 minutes and they'll come back on. If you watched our video, we mention not starting the car for 90 seconds after completion for that reason. The car does some adaptive learning and if it's interrupted, it delays that process for the sport/sport+ modes.
Hey
I am driving a macan turbo 2017 with the cobb tuning accessport with your protune map but after a week i was experience that i was loosing turbo pressure so i have ordered your diverter valves from go fast bits but after installing the valves i keep having the same problem ?
Can you grab a log of this and send to info@flat6motorsports.com? We can talked a look. Also check the charge pipes and clamps around the throttle body.
@@Flat6Motorsports thanks for your quick response i will send you as soon as possible a data log and will check charge pipes and clamps
What if I put in different fuel than 93?
It supports 91 or 93 octane.
what do you typically see on the 95B Macan S with the pro tunes and air intake upgrade?
About 80whp over stock.
Do you have for the macan turbo s 2014?
In the US market they began as a 2015 model year. I'd assume the 2014 in another market would work fine.
What are your power figures from OTS to your Protunes?
We achieved +26hp and 49ft/lb of torque to wheels over the OTS map. flat6motorsports.com/collections/macan-ecu/products/flat-6-motorsports-custom-cobb-pro-tuning-macan-s-gts-turbo
@@Flat6Motorsports Awesome! What octane?
@@Drmdvl2 93
Were 60-100mph times bettered
@@Demoaccount-i2k Absolutely. I don't have measurements specific to those speeds but no doubt.
Does anyone want to sell me a tune?
flat6motorsports.com/products/cobb-tuning-access-port-v3-macan