Best jimny chanel on,yt! 🔥 i have a question mate i already have a 3 inch body lift if i fit the 2 inch suspension lift do i need to do any other mods? Ie brake lines etc etc. Its mainly uses on road not off road. Thanks man keep these videos coming 🤜
Thanks for sharing your build. So informative. I'm a bit concerned of the increased center of gravity as your unit has been lifted body 2" + suspension 2". Should the tires offset be adjusted to compensate for the lift?
Thank you for the support, I appreciate it. Yes sir, you’re right, I explained that in one of my other videos. The reason I have 15x10 rims with a -32 offset and 1” wheel spacers is to restore that stability that I lost when I lifted it. Although I went 4” higher with the lift, I went wider with the vehicle stance to compensate. I hope this helps.
A wonderful person and a beautiful car I want to ask some questions before I buy like you Is it necessary to buy brake wires? With a lift of 2 inches and a body of 2 inches Also, how do you see the stability of the car in the turns? And did I say comfort with lifting the body? The most important question is what is the use of the little blue things that you bought at the beginning of the clip Thank you
I must have missed this comment. My apologies. The amount of lift would determine if the extended brake lines are necessary, in my case it was. The stability on turns is fine, I never had any problems with it. Comfort wise, its not the most comfortable when compared to a standard luxury car but thats a compromise I made for the off-road capability. Those are castor corrected bushings.
Hello how are you? I have seen the videos on your channel and I love the transformation of your Jimny, I would like to know the specifications and brand of the lift kit you use in your car, I have one just like it and I would like to leave it as yours, thank you very much, one more thing , the dimensions of the tires and wheels please, I really appreciate your help, I live in Colombia.
Looks like that you have installed the body lift above the original body shims, Am I correct? Congrats for the video, I have a JB43 in Brazil my next step is install the body lift
Thanks man for all your suggestions. I thinking to install just the Black raptor 2" and the wheels spacer. But seems like I will also need the castor correction bushes and?? What else is recommended? Thanks
Hey, Zaff. Did you had anything to rearange in the engine bay as I understand engine went lower with the frame and other parts which are mounted on the jimny engine bay stayed in same height?
nice build on the Jimny. i also have the same model, with a 2.5" lift. i saw your video on the tyre size upgrade. in your opinion what is the maximum tyre size that fits without trimming the arches? cheers from Transylvania!
Thanks bud ! I'm not sure on what the max size would be without trimming because I only fitted stock size and 31s but you can check some online jimny forums to get the answer.
It's not mandatory, but recommended. The steel braided ones more durable than the stock rubber ones as well for off-road use. I personally like to go the extra mile when it comes to brakes :)
I believe BR are manufactured in the UK, i'm not 100% sure on that. They're not that expensive either, comparing to Pro Comp, Trailmaster, AVO etc. I'd say they're more budget friendly. What I can comment on is the quality of the ride from BR, absolutely fantastic and smooth. I have no complaints. If I ever have to replace the suspension again, i'm definitely going back with BR. However, At the end of the day, it comes down to personal preference, everybody have their trusted brand :)
@@Zaff_TT so you wouldn’t recommend 2” suspension lift and 2” body lift without upgraded arms and rods etc ? Would it not work with 2” suspension and shocks with 2” body lift, extended brake lines and shock spaces / relocation ?
@@CustomsX I thought you meant 4” suspension. With 2” body and 2” you don’t need panhard rods and arms. But you should get castor corrected bushings and extended brake lines
@@Zaff_TT Apologies, so just new caster corrected bushes, brake lines, shock spacers front and rear , 2” suspension and body lift. No prop shaft spacer needed ?
@@Zaff_TT hi Just a quick one, did you have problems with body mounts not lining up right when lowering body back down ? Also have you any ideas about suspension blocks ? Thanks
![HOW TO JIMNY [Fitting coil spacers]](/img/n.gif)
Jimny no rust version.... NICE
Gotta keep it clean lol
great stuff bro, . wanna get one done soon
Thanks bro, it def makes it more off-road capable. BTW I really love your recipes, they are on point.
I love jimny.
Thank you ! :)
Best jimny chanel on,yt! 🔥 i have a question mate i already have a 3 inch body lift if i fit the 2 inch suspension lift do i need to do any other mods? Ie brake lines etc etc. Its mainly uses on road not off road. Thanks man keep these videos coming 🤜
Thanks for sharing your build. So informative.
I'm a bit concerned of the increased center of gravity as your unit has been lifted body 2" + suspension 2".
Should the tires offset be adjusted to compensate for the lift?
Thank you for the support, I appreciate it.
Yes sir, you’re right, I explained that in one of my other videos. The reason I have 15x10 rims with a -32 offset and 1” wheel spacers is to restore that stability that I lost when I lifted it. Although I went 4” higher with the lift, I went wider with the vehicle stance to compensate.
I hope this helps.
Is is not good to go with 2” and 2” or?
@@Zaff_TThow did you go wider?
Hello! the videos are great! it would be nice to have a film that shows you how to separate the body and the frame. Thanks 😉
Hey, in the future when I'm repainting, I would do that :)
@@Zaff_TT super, looking forward to! thanks, Bálint from Hungary
A wonderful person and a beautiful car
I want to ask some questions before I buy like you
Is it necessary to buy brake wires?
With a lift of 2 inches and a body of 2 inches
Also, how do you see the stability of the car in the turns?
And did I say comfort with lifting the body?
The most important question is what is the use of the little blue things that you bought at the beginning of the clip
Thank you
I must have missed this comment. My apologies.
The amount of lift would determine if the extended brake lines are necessary, in my case it was.
The stability on turns is fine, I never had any problems with it.
Comfort wise, its not the most comfortable when compared to a standard luxury car but thats a compromise I made for the off-road capability.
Those are castor corrected bushings.
Very Good Like Already Subscribed 🎉🎉🎉🎉🎉
Sweeettt jimny bro
Thanks bro!
Hello how are you? I have seen the videos on your channel and I love the transformation of your Jimny, I would like to know the specifications and brand of the lift kit you use in your car, I have one just like it and I would like to leave it as yours, thank you very much, one more thing , the dimensions of the tires and wheels please, I really appreciate your help, I live in Colombia.
Looks like that you have installed the body lift above the original body shims, Am I correct?
Congrats for the video, I have a JB43 in Brazil my next step is install the body lift
Thanks. Its the original body mounts cut in half
Thanks man for all your suggestions. I thinking to install just the Black raptor 2" and the wheels spacer. But seems like I will also need the castor correction bushes and?? What else is recommended? Thanks
Hey, Zaff. Did you had anything to rearange in the engine bay as I understand engine went lower with the frame and other parts which are mounted on the jimny engine bay stayed in same height?
Not to my knowledge. You’ll only have to extend the steering column by adding a steering spacer.
Awesome just got some and the front springs ones longer than the other is that right thanks gray
Nice bud ! That’s correct, one pair should be longer than the other pair, I can’t remember if the long pair goes in front or the back 😅
@@Zaff_TT thanks for advice I was worried thay had send me a wrong part thanks for your help 👍👍
Good video !
Thanks ! Glad you enjoyed it :)
It's been 2 years. How you like it?
Fantastic. It’s so good I recently upgraded to a 4” black raptor suspension lift 💯
Hey Zaff, I want to install a 2" suspension lift on my jimny. Do you know the biggest tyre I can fit without cutting after the lift?
Hey I’m not sure. You can check some online Jimny forums. They might be able to help 👍
👍👍
Neat!👌👌👌
suggest you using tri pod to make camera stable.... I felt like on a boat while watching this video lol
Thanks for the suggestion bud 🙌
nice build on the Jimny. i also have the same model, with a 2.5" lift. i saw your video on the tyre size upgrade. in your opinion what is the maximum tyre size that fits without trimming the arches? cheers from Transylvania!
Thanks bud ! I'm not sure on what the max size would be without trimming because I only fitted stock size and 31s but you can check some online jimny forums to get the answer.
@@Zaff_TT Did some checking without trimming or lifting 215/75 are the most recommended tire size for JB43
How long did you go over standard length brake lines 2 inch or 4
4 inch
Nice vibes
I also did mine too. I up in st.lucia
What tries are you playing next
Thanks bud. I'm not sure what you mean by tries. Do you mean tires?
@@Zaff_TT us man that happens when are typing off road 🤣
Any lift kit for Toyota RAV4 3s 5 doors.
If you're based in Trinidad, check ABS Offroad Limited.
Are brake lines extension mandatory for the 2 inch lift? Thought it was necessary if you lifted 3 inch and beyond
It's not mandatory, but recommended. The steel braided ones more durable than the stock rubber ones as well for off-road use. I personally like to go the extra mile when it comes to brakes :)
Send me number
3751542
Hello , with the Bodylift do you change the steering column? Any adjustments?
I didn't change the steering column, I extended it using steering spacers.
@@Zaff_TTwhere did you put the steering spacer? Because I did the 2"body lift on my jimny too and my steering wheel has been too heavy..
@@teo_siamidis it goes on the steering column. Google has pictures of it, you can check it out
Black Raptor stuff seems to be generic Chinese parts rebranded. All they do is throw in some stickers and charge a fortune. Not TUV rated or anything.
I believe BR are manufactured in the UK, i'm not 100% sure on that. They're not that expensive either, comparing to Pro Comp, Trailmaster, AVO etc. I'd say they're more budget friendly. What I can comment on is the quality of the ride from BR, absolutely fantastic and smooth. I have no complaints. If I ever have to replace the suspension again, i'm definitely going back with BR. However, At the end of the day, it comes down to personal preference, everybody have their trusted brand :)
Hey zaff quick question. Did you buy extended break hose for your 2 inch body and suspension lift?
Hey, yeah I did. Check out 1:21 on the video 😁
Hi guys . So can lift a total of 4” without anymore parts required ? No caster arms or Panhard rods ? Any help much appreciated
@@CustomsX I wouldn’t recommend it. Your suspension geometry will be skewed. Check my more recent video on installing a 4” suspension
@@Zaff_TT so you wouldn’t recommend 2” suspension lift and 2” body lift without upgraded arms and rods etc ?
Would it not work with 2” suspension and shocks with 2” body lift, extended brake lines and shock spaces / relocation ?
@@CustomsX I thought you meant 4” suspension. With 2” body and 2” you don’t need panhard rods and arms. But you should get castor corrected bushings and extended brake lines
@@Zaff_TT Apologies, so just new caster corrected bushes, brake lines, shock spacers front and rear , 2” suspension and body lift.
No prop shaft spacer needed ?
@@Zaff_TT hi Just a quick one, did you have problems with body mounts not lining up right when lowering body back down ? Also have you any ideas about suspension blocks ? Thanks
Is it a full kit or u ordered it individually?
Ordered individually
Hey Zaff, can you please share the link for the center console? Been trying to locate one for a while here in Trinidad with no luck
Hey buddy, this is the link. www.ebay.com/itm/153966949378
Hi Zaff, Is there no need for adjustment for the steering-wheel link for this lift?
Hey, Its recommended, I just haven't got around to do it yet :)
tire size?
31x10.5r15
I have jb33 jimny.
They are really nice 4x4s !
I want one
It’s a fun vehicle 😁
Nice video.. did you make any adjustment on your transmission?
I added a transmission cooler. The video on the channel 😁
@@Zaff_TT i mean for the body lift, did you make any necessary adjustment on the transmission?
@@momu3659 no I didn’t
They are good for offroad?
Very good ! I’ve had no problems with it. It’s comfortable and smooth both on and Off-road.
Not to smooth?
Landed cost?
Do you have a link for the all the parts you installed?
Everything can be found on jimnybits.com
8)
Brape kos br0