Hi. I'm having a dpf issue 2017 transit. Had it chemically cleaned and it's still drive to clean and service engine now. Was at 200 percent. I think i should just get a new one or try an exhaust place as opposed to my mechanic
Great job , Great video , I need to clean the DPF on my 2103 Transit , could i use an electronic paint sprayer or hand pump garden sprayer in place of the Launch GUN cheers
that was a belta watch that lad part 1 & this part 2. the start ov the launch dpf fluid ay lad. quick question jimmy please - how successfull was the wynss fluid with all other dps you done with the gun?
Now having watched many of your videos I happen to notice you seemed very happy in this.... one more than normal. Is there a reason for such positivity?.
I've had a couple of these transits now fail me and it is exciting finding something to overcome this Ford Transit / Peugeot Boxer issue and actually getting good results from my research
Perfect job. Please can you tell me which is the fuse for diesel particulate filter vaporizer? I know it is 20a but where is located- is the tiny one or is that thick 🤔? Please can you answer 🙏 Thanks
I tried regeneration on my ford transit custom two times, but unfortunately failed. I used dpf 100 normfest, two times the van seems to be okay but it is in limp mode and I don't know how to reset it. Where are you located. Thanks
I know you don't but you can removed the dpf and use an acid based tfr (traffic film remover) to clean the dpf, works very well from what I have seen, and cheap too.
A brilliant man loves nosing watching what the gentleman is getting up to next thank you❤️👀👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Ho Jimmy, i have seen your few videos where you reset the Ash level by replacing dpf settings, is that Ash level is just a modelled number and not actual. My 320d regens fine, soot level always low but getting fault code for Ash.
@@ORileysAutos thanks Jimmy, I have reset the dpf using ISTA, Ash level now reduced to zero. Back pressure is 0 mb at Idle and 8mb at 2000, is that ln the limits? Thanks for your help. I am not far from you and may book a clean if required. Thanks
www.launchtech.co.uk/technical-fluids/dpf-gun-particulate-filter-cleaning-fluid/
People stop ringing Jimmy over questions, 😂 let the man just do his work.
I bet the gentleman looks forward to the summer❤️👀👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Hi. I'm having a dpf issue 2017 transit. Had it chemically cleaned and it's still drive to clean and service engine now. Was at 200 percent. I think i should just get a new one or try an exhaust place as opposed to my mechanic
I put 800ml of the JLM cleaner in mine and the pressure differential increased from. 38 at idle to 1.96.
Wish i hadn't bothered now.
Thanks for you videos. I’m tackling my 2013 custom with your knowledge. Think I need to swap out the vaporiser due to p244c code.
Great job , Great video , I need to clean the DPF on my 2103 Transit , could i use an electronic paint sprayer or hand pump garden sprayer in place of the Launch GUN cheers
Ohh, didn't realize that mb was a multiple of 10 in Kps, thought my DPF pressure was too low and maybe cracked or something!
that was a belta watch that lad part 1 & this part 2. the start ov the launch dpf fluid ay lad.
quick question jimmy please - how successfull was the wynss fluid with all other dps you done with the gun?
It was kinda successful but getting the gun and compressor made life so much easier with results far better and works almost every time
Hi mate transit 2.2 mk7 power loss & black smoke just had dpf gutted and mapped out what's common issues .
Top job Jimmy 👍 with a bit of frothing action.
Thank you
Hi great information. What Autel Diagnostics are you using to perform regeneration?
Not performing regeneration just reading live data.
Autel MK906BT
Great Stuff Jimmy!! Thank You😇
Glad you enjoyed it
Now having watched many of your videos I happen to notice you seemed very happy in this.... one more than normal. Is there a reason for such positivity?.
I've had a couple of these transits now fail me and it is exciting finding something to overcome this Ford Transit / Peugeot Boxer issue and actually getting good results from my research
Great video! Can this be done without plugging in OBD computer?
It can be cleaned but you need diagnostic scan tool to reset dpf
Up to what level of blockage will this clear
Perfect job. Please can you tell me which is the fuse for diesel particulate filter vaporizer? I know it is 20a but where is located- is the tiny one or is that thick 🤔?
Please can you answer 🙏
Thanks
I've never had to change the fuse on a transit custom.
I tried regeneration on my ford transit custom two times, but unfortunately failed. I used dpf 100 normfest, two times the van seems to be okay but it is in limp mode and I don't know how to reset it. Where are you located.
Thanks
@@motanel Biggleswade Bedfordshire
What's a rough price for that procedure please
Great work, do you work in the kent area.
Only Bedfordshire
Hi I live in canada I m a mobile mechanic I would like to know ow if this product can be shipped to me ,I appreciate your help
I know you don't but you can removed the dpf and use an acid based tfr (traffic film remover) to clean the dpf, works very well from what I have seen, and cheap too.
The fluid is under £25 delivered and you can get two cleans from it if not too blocked
Hi Jimmy my dpf has oil mass ash 45g and the limit is 70g can that be cleand with dpf on the car or the car has to be removed.
A brilliant man loves nosing watching what the gentleman is getting up to next thank you❤️👀👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Top stuff keep them coming
Cheers
Hi I have a 2013. Custom 2.2, had from new but not sure if my one has this filter, if it does would cause a lumpy tick over, 87,000 miles
EGR or needing software update can cause lumpy idle on these. Also injectors
Ho Jimmy, i have seen your few videos where you reset the Ash level by replacing dpf settings, is that Ash level is just a modelled number and not actual. My 320d regens fine, soot level always low but getting fault code for Ash.
Ash is basically a calculation of time elapsed and how many times its done self regeneration to guess the Ash load
@@ORileysAutos Superb, thanks for your response. So if dpf is not blocked the fault code can be ignored?
@@MrMzhashmi84 you'd need to reset it in adaptions
@@ORileysAutos thanks Jimmy, I have reset the dpf using ISTA, Ash level now reduced to zero. Back pressure is 0 mb at Idle and 8mb at 2000, is that ln the limits? Thanks for your help. I am not far from you and may book a clean if required. Thanks
Nice. Btw How many cleanings toi are doing a month?
I've never actually counted. But between 15-50 depending on work flow
Hi I have a icarsoft cr max scanner... But would like to upgrade what would you recommend?
www.launchtech.co.uk/
Launch Pro 5 is a good unit
Great video 👍👍
Thank you 👍
Where are u based? And how much Isit for this please?
Bedfordshire.
Orileysautos@gmail.com
Good job
Thanks
jimmy can i google and call you bruv ! LOL
Noooo 😭
@@ORileysAutos LOL