Drill- Packedge in typical box, came with a tool bag (added bonus), two batteries, one charger, drill, and driver. Two words "plenty of Torque" th-cam.com/users/postUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv well I guess that's three. Nice upgrade from current setup. Has belt clips, I don't think I will be using those. Driver and drill were bigger than what I expected but it is an upgrade from the current setup. For the money I would say that this is a great setup for Professionals and DIY/Weekend warriors.
Thank you so much for this. I managed to fix my parkside 12V cordless drill B2 that had the speed controller issue. Replaced the mosfet with an ST15810 and a diode with some 1000V 3A diode. Works again.
i´m learn with you more than anothers "teachers" who are around! Thank you so much! Aprendo mas contigo que con otros "profesores" que andan por alli! Muchisimas Gracias!
Perfecto amigo, era lo que hacía falta para reparar las cosas, no sólo cambiarlas ay veces que ya no existe la refacciones y tienes que deshacerse de tus herramientas Felicidades desde cdmx, tu amigo mario, pd: de que país eres??
Hi can I swap positive side to the negative side on a 18 v tool so I can use a 20 v battery because they are on opposite sides on the batteries your feedback would be very helpful thanks
Hello from Germany, first things first your videos are top Quality. I have a question is it possible to make a hack that the impact turns left allways with full power and turns right with the choosen power on display? Thanks in advance Markus
Good Dahen Zana! Please, I need your help if possible. I have a machine like the one in the video and I have already tested the switch, the motor, the battery and it works, but when I turn on the electronic board (I don't know what its function is), before the switch it doesn't give any sign of "life". I can remove this and connect the battery directly to the switch. Thank you very much.
Very Nice work.Do you have any idea from Angle Grinder of Parkside 20v.It burn/exploded the modest/transistor near to the battery and It can't be read the type.i would like to change.Can you help me with it?thanks a lot.
i have Parkside PDSSE 450, but it is too weak, it is specified it has 100/450N of torque, but it has maybe half of it, i have to modify it , it seams that strenght of big spring determines impact torque, so i have to put some spacers behind spring to get more load on balls that lift impact hammers, your video cleared what to do, thanks
No, the strength of the spring doesn't affect impact torque - only the weight and speed of the rotating hammer does. The only job of the spring is to push forward and engage the hammer, each time after the ingenious mechanism of the two balls with their curved seatings has retracted the hammer from the anvil ("automatically" every time the spindle meets enough resistance to get stuck).
@@MickeIsotalo yes, I'm thinking about how the strength of the force in the spring affects the operation of the tool, it's not that it doesn't have an effect, the goal is for the hammer to spin as fast as possible before impact (weak force in the spring) but when it hits it must not be raised immediately because it will not transfer all the impact energy (strong force in the spring), there is probably an optimum force that allows the hammer to spin fast enough and stay on impact long enough
@@makantahi3731, this other YT-video with high speed camera of the impact mechanism at work on several different wrenches is most enlightening: th-cam.com/video/xQzqNnWG21s/w-d-xo.html&ab_channel=TorqueTestChannel The short black and white sequence at 15 min 18 sec shows how the hammer actually bonces backwards off the anvil after each stroke, then is drawn back still in "mid air" by the mechanism of the two ball bearings - before the spring pushes it forward again during the next half turn, for the next hit (as is commented also on that video, intuitively one would imagine the hammer sliding off the anvil after each stroke, but that's not the case - at least not ideally). Surely there is a more or less delicate calibration of the spring force involved. A too weak spring would probably not push the hammer in place fast enough, maybe delaying the next hit from a half turn to a full turn - or longer (or the hammer could "land" only partially on the anvil surface). A too strong spring on the other hand could probably slow down the retraction of the hammer, touching the anvil again after the initial bounce and then sliding off it (making the process a bit less efficient). Maybe a too strong spring also could push the hammer back "too early", pushing it against the front of the anvil before it has had time to pass by (also affecting efficacy, at least a bit). Also remember that inside the hammer, the spring is resting against ball bearings at both ends. Thus the spring itself is in no way involved in the rotation or momentum of the hammer, only the pushing forward of it.
Theoretically yes, you would just replace the "anvil" section, however I'm not sure parts are available or if the one from the impact wrench is inter-compatible and this one is not ideal for nuts but will work. There are hex drive adapters which you just put into the socket to get 1/2 or 1/4 inch square drives
You have the schematic of the 2 electronic boards or a detailed foto whit pieces ?I have one of this and she have missing pieces on the both boards.Thanks!!
شكرا جزيلا اخي العزيز على هذا العمل الرائع ولدي سؤال اذا ممكن تجاوبني عليه وهو ما هي وظيفة الدائرة الموجودة اسفل قبضة الدريل والتي فيها الاقطاب التي تتصل بالبطارية
Dahen: I don't know if you will understand this English. But when you put the two captured larger ball bearings in the drive head, one was captured and the other came back to the uncaptured position. I may have seen it wrongly in the camera. If it is uncaptured the head will soon fail maybe.
I checked this when working on my own machine, and while releasing the spring mechanism on the vice, both ball bearings are moving to the middle of their curved seatings - which is the same position where you put the bearings back while the spring is compressed. However, since the axle with the bearings moves inside the hammer while releasing the spring, they can't pop out from that position but are held in place by the interior of the hammer - if that was your worry?
it is a good tool, you will have fun using it. I think you should try to join parkside facebook groups, there are a few. I am sure that 'western people' often discard their tools - they land in trash but hey... they could send them to you instead, if you show them your materials, I am sure they will do. How much is a 1kg parcel to Kurdistan from EU?
Drill- Packedge in typical box, came with a tool bag (added bonus), two batteries, one charger, drill, and driver. Two words "plenty of Torque" th-cam.com/users/postUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv well I guess that's three. Nice upgrade from current setup. Has belt clips, I don't think I will be using those. Driver and drill were bigger than what I expected but it is an upgrade from the current setup. For the money I would say that this is a great setup for Professionals and DIY/Weekend warriors.
Thank you so much for this. I managed to fix my parkside 12V cordless drill B2 that had the speed controller issue. Replaced the mosfet with an ST15810 and a diode with some 1000V 3A diode. Works again.
Mais uma grande ajuda na reparação de máquinas, trabalho perfeito 👍
obrigado senhor
What a great machine.
I wish i had the knowhow to troubleshoot and repair them.
Great job!
✌️
i´m learn with you more than anothers "teachers" who are around! Thank you so much! Aprendo mas contigo que con otros "profesores" que andan por alli! Muchisimas Gracias!
Great job!!! learning a lot from your videos!!!
thank you sir, i hope it's helpful for you
Very helpful. I happen to have a problem with the same tool. Thank You. good luck with the channel.
Τέλεια έγινε η συντήρηση του δραπανοκατσαβιδου και αυτό είναι το καλύτερο.
σας ευχαριστώ, κύριε
@@zana3587 οκ
You are a big inspiration I have to say!
Great job it better than what it was new it has better components now so that means more torque more power without burning out so easily 💯👍
دائما مبدع
Ko zna,zna.Svaka čast majstore.Precizno i pedantno 👍🍺
Hvala Vam gospodine
@@zana3587 cini mi se jaci, moj prije pocne udarat nego ovaj, je to do popravka ili je moj defektan
this is repair and restoration 😀😀 great video once again
Thank you sir
Bravo ! Mieux que neuf !!!!! 👍👍👍
Well done ! Better than new!!!!! 👍👍👍
Excellent work. Could you tell me what type of diode and amperage you used for the replacement? Thank you
أحسنت أستاذي العزيز عمل متقن
اشكرك اخى العزيز
Another great repair.
Thank you sir
Great video. Thanks a lot for share you knowledge. Greetings!!!
thank you sir
Absolutely genius you are now the world's first impact driver surgeon your video was brilliant. Is it possible to purchase spares from lidl
thank you sir, no idea sorry
Amizing thank you so much
عمل ممتاز اشكرك سيدي
You are very skilled at what you do, very interesting.
Thank you sir
@@zana3587 is there a possibility to mail you regarding questions?
عاش شغلك متقن
اشكرك اخى العزيز
المزيد من الإبداع عمل رائع
اشكرك اخى العزيز
Tenvir oldum muaffakiyetler dilerim daima
Wonderful and genius work . My brother.
Thank you my teacher and my brother
Your welcome my dear brother.
Thank you bro
Absolutely brilliant
Very great job my brother. Who knows, do It alive. Hold my like. 👏
thank you sir
مبدع.... اخي
ممكن تعمل فديو للكابسة خشب الشحن.. وشكرا
لدى فيدو فى قناتى لكابسة خشب الشحن
Simply perfect👍
Thank you sir
سللم عقلك وسلمت يداك
Bravo
thank you sir
Как всегда на высоте!
благодарю вас
Awesome thanks!!! Can you please tell me what lubricant you use?
Beau travail 👍👍👍👍
That was a very clever way of testing the mosfet. kudos on that, I'm going to have to use that later
Good idea the diode from outside.
What type of grease are you using pls?
Oops torque is mind blowing wow amazing
Spitzenklasse!
One hell of a job !
Thank you sir
Bravo daher zana
솜씨가 예술이다.
감사합니다
Congratulations on the excellent videos!
What is the reference or equivalence of the diode you used on the switch?
Thank you. Hug!
thank you sir, diode high amp
@@zana3587
Ok! Thank you very much.
Your videos are spectacular! Well there!
Great restored sir.
Thank you sir
Good work friend🙂
Thank you sir
Great job. Well done. If you can buy it. Car CV joint grease is better for greasing impact parts.
thank you sir
Yes, graphite grease.
Muy Bien..!! ....ji ji j i ji..Saludossss
gracias Señor
Perfecto amigo, era lo que hacía falta para reparar las cosas, no sólo cambiarlas ay veces que ya no existe la refacciones y tienes que deshacerse de tus herramientas Felicidades desde cdmx, tu amigo mario, pd: de que país eres??
Hi can I swap positive side to the negative side on a 18 v tool so I can use a 20 v battery because they are on opposite sides on the batteries your feedback would be very helpful thanks
Hi, is there a replacement part for the ly758a board at the bottom? Thanks.
Браво полезно видео
Hello from Germany, first things first your videos are top Quality.
I have a question is it possible to make a hack that the impact turns left allways with full power and turns right with the choosen power on display?
Thanks in advance Markus
The reason why the drill bit slows down and rotates slowly, is it because the battery is weak or something else?
صباحك ورد وفل
اشكرك اخى العزيز يا معلم
Buna treaba 😊
multumesc domnule
أحسنت العمل أستاذي العزيز كيف يمكنني خلع المسنن الذي في رأس الماتور
Where I can get that protection board with 2 mosfets?
عمل رائع شكرا
اشكرك اخى
Very good
Good Dahen Zana!
Please, I need your help if possible. I have a machine like the one in the video and I have already tested the switch, the motor, the battery and it works, but when I turn on the electronic board (I don't know what its function is), before the switch it doesn't give any sign of "life". I can remove this and connect the battery directly to the switch.
Thank you very much.
yes you can remove electronic board, but you must charging before the battery empty
@@zana3587 OK! I understood perfectly ... thank you very much.
God bless you! Hug!
Great video
Thank you sir
@@zana3587 You're welcome :)
أحسنت 👍🏽
اشكرك اخى
Merci pour cette video
Merci Monsieur
Si vous pouvez nous faire une video sur le switch de makita in cha allah.
Превосходно
Спасибо, сэр
Very Nice work.Do you have any idea from Angle Grinder of Parkside 20v.It burn/exploded the modest/transistor near to the battery and It can't be read the type.i would like to change.Can you help me with it?thanks a lot.
sorry sir
Καλημέρα φίλε τέλεια δουλειά μπορείς να δήξις πως αλλάζουν το δραναζι του μοτέρ ευχαριστώ
とても良い
ありがとうございます
i have Parkside PDSSE 450, but it is too weak, it is specified it has 100/450N of torque, but it has maybe half of it, i have to modify it , it seams that strenght of big spring determines impact torque, so i have to put some spacers behind spring to get more load on balls that lift impact hammers, your video cleared what to do, thanks
No, the strength of the spring doesn't affect impact torque - only the weight and speed of the rotating hammer does. The only job of the spring is to push forward and engage the hammer, each time after the ingenious mechanism of the two balls with their curved seatings has retracted the hammer from the anvil ("automatically" every time the spindle meets enough resistance to get stuck).
@@MickeIsotalo yes, I'm thinking about how the strength of the force in the spring affects the operation of the tool, it's not that it doesn't have an effect, the goal is for the hammer to spin as fast as possible before impact (weak force in the spring) but when it hits it must not be raised immediately because it will not transfer all the impact energy (strong force in the spring), there is probably an optimum force that allows the hammer to spin fast enough and stay on impact long enough
@@makantahi3731, this other YT-video with high speed camera of the impact mechanism at work on several different wrenches is most enlightening: th-cam.com/video/xQzqNnWG21s/w-d-xo.html&ab_channel=TorqueTestChannel
The short black and white sequence at 15 min 18 sec shows how the hammer actually bonces backwards off the anvil after each stroke, then is drawn back still in "mid air" by the mechanism of the two ball bearings - before the spring pushes it forward again during the next half turn, for the next hit (as is commented also on that video, intuitively one would imagine the hammer sliding off the anvil after each stroke, but that's not the case - at least not ideally).
Surely there is a more or less delicate calibration of the spring force involved. A too weak spring would probably not push the hammer in place fast enough, maybe delaying the next hit from a half turn to a full turn - or longer (or the hammer could "land" only partially on the anvil surface). A too strong spring on the other hand could probably slow down the retraction of the hammer, touching the anvil again after the initial bounce and then sliding off it (making the process a bit less efficient). Maybe a too strong spring also could push the hammer back "too early", pushing it against the front of the anvil before it has had time to pass by (also affecting efficacy, at least a bit).
Also remember that inside the hammer, the spring is resting against ball bearings at both ends. Thus the spring itself is in no way involved in the rotation or momentum of the hammer, only the pushing forward of it.
@@MickeIsotalo ok, thank you
Great vid do you know of any sites where I can acquire the planatery gears
thank you, sorry sir no idea
@@zana3587 what type of grease did you use and where can I get it
any type but good quality
@@zana3587 thanks
}
عمل روعة... عندي نفس العطل لكن لم اتمكن من معرفة (رقم الموسفت)الذي استبدلته.اذا امكن رقم ذلك الموسفت مع الشكر والتقدير
اشكرك اخي العزيز . لقد كتبت رقم الموسفق المحروق و البديل فى الفيدو
With all these super cool tactical black sci-fi paddings and decorations, power tools look like crap from the inside.
yes sir
صباح الخير هل اختصاصك تصليح بارك سايد او انواع اخرى من العدد
صباح الخير . ليس اختصاص بل هواية فى التصليح
@@zana3587 انت محترف
Nice video as always mate. Is it possible to change the Hex Driver to 1/2 square anvil on this Tool or the newer Blushless one?
thank you sir . no idea sir sorry
Theoretically yes, you would just replace the "anvil" section, however I'm not sure parts are available or if the one from the impact wrench is inter-compatible and this one is not ideal for nuts but will work. There are hex drive adapters which you just put into the socket to get 1/2 or 1/4 inch square drives
Subscribed
thank you sir
Parkside PKGA 20 has a diode across the trigger. I disassembled it and forgot where to put the new one. Anyone got a picture?
nice video as always, but you shoul improve your soldering skills! :)
thank you sir
You have the schematic of the 2 electronic boards or a detailed foto whit pieces ?I have one of this and she have missing pieces on the both boards.Thanks!!
can you show me in time bar
should have used some heatsink compound on the Mosfet to the Heatsink.
Super 👍🏾👌
thank you sir
Could you say what kind of diameter the bearing balls at 11:37 are?
Au făcut ceva peste imaginația mea
multumesc domnule
شكرا جزيلا اخي العزيز على هذا العمل الرائع ولدي سؤال اذا ممكن تجاوبني عليه وهو ما هي وظيفة الدائرة الموجودة اسفل قبضة الدريل والتي فيها الاقطاب التي تتصل بالبطارية
اشكرك اخى. وظيفة هذه الدائرة لقطع الاتصال بين البطارية و الموتور عندما يكون البطارية ضعيفا لكى لا تفرغ البطارية تماما . حسب علمى
@@zana3587 شكرا جزيلا اخي الكريم وفقك الله
👍👍👍👍👍👍👍👍👍
thank you sir
Teşekkürler
Meni ne radi regulacija brzine na prekidacu,jel mi mozes reci koje si delove koristio pa da i ja probam ovako da uradim pozz
sve objašnjavam
Możesz opisać co wymieniałeś? Dioda?
przepraszam nie rozumiem
Hi were can you buy the repair parts kit please I have the same problem with my half inch impact driver. Kind regards.
sorry sir i don't know where you buy this parts
The original diode, what type, power is?
no idea about the original diode . but i use a bigger diode, more amp
Good 🌹👍
Thank you sir
Gut 👍
Danke, du Bruder
Sir is motor ka Aarmechar kese niklega
Класс!
обычный
Dahen: I don't know if you will understand this English. But when you put the two captured larger ball bearings in the drive head, one was captured and the other came back to the uncaptured position. I may have seen it wrongly in the camera. If it is uncaptured the head will soon fail maybe.
I checked this when working on my own machine, and while releasing the spring mechanism on the vice, both ball bearings are moving to the middle of their curved seatings - which is the same position where you put the bearings back while the spring is compressed. However, since the axle with the bearings moves inside the hammer while releasing the spring, they can't pop out from that position but are held in place by the interior of the hammer - if that was your worry?
سڵاو برام.... ئەو مۆسفتە لە کوێ دەس ئەکەوێ؟ داێودەکە هیچ چی ژمارەیەکە؟
genius
thank you sir, i hope it's helpful for you
👍👍👍👍
Thank you sir
👍👍👍👍👍👍👍👍
عندي بطاريه بيه شحن بس ماتنطي فلوتيه الدريل بارك سايد
لا اعرف . اسف
شكرأ اخي ❤️
💪👏👏
Thank you
Wow
thank you sir
Hi, when can I find this boards please?
it is a good tool, you will have fun using it. I think you should try to join parkside facebook groups, there are a few. I am sure that 'western people' often discard their tools - they land in trash but hey... they could send them to you instead, if you show them your materials, I am sure they will do. How much is a 1kg parcel to Kurdistan from EU?
thank you sir, that is very nice for you. no idea how its cost