Just for clarity, the 2011-2014 is different from the 2007-2010. This must be the newer version, since there’s no drum e-brake or goofy Torx hub retaining bots.
Portion removing the hub at 3:23 you'd be pounding that until it was simply putty for something in a rust belt and still not have removed it without heat, oxy acetylene torch. 2012 Ford Edge left rear just did.
I read one of those bolts behind the hub is almost impossible to get without a special torx tool. Some of them have torx fasteners instead of the 15 mm bolt.. Is that correct? EDIT this must be later version. There's no tone ring on the axle either.
Excellent video and thank you for posting! Would you happen to know if this Ford Edge is the same has a 2013 Lincoln MKX AWD when it comes to performing the same job?
something had to give, running that little torx in and out with the high powered air impact, do that one by hand people. you can see he snaps the bit off in the head of the bolt putting it back in.
Ford 4WD Edges have some bad designs as PTU DRIVE TRAIN goes can't change the fluid on them unless u drill and tap drain and fill holes...they say it's not serviceable but it fails when the fluid goes bad and tears up the unit
+Clifford Brammer The part in this video fits your application, and the install should be the same or similar. Buy this part on 1AAuto.com: 1aau.to/m/Shop-TRQ
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Very professional I like the fact you give torque specs while doing the procedure. Thanks!
Just for clarity, the 2011-2014 is different from the 2007-2010. This must be the newer version, since there’s no drum e-brake or goofy Torx hub retaining bots.
Portion removing the hub at 3:23 you'd be pounding that until it was simply putty for something in a rust belt and still not have removed it without heat, oxy acetylene torch. 2012 Ford Edge left rear just did.
Doing this job on a 2013 Edge today. Thanks for the well narrated and perfectly detailed video. You have a new sub.
BROKE THE TORX BIT. GREAT JOB TWO THUMBS UP.
Saw that too then I found your comment.
If you're using impact it's just a matter of time.
Busted! I see what you did to your torx socket when you tightened the rotor mounting bolt.😉🤫
What he do?
ha yeah...i noticed that too...i never use an impact on those ...and i never use a hollow security style bit either...they break too easily 👍
it doesn't get any better then this......Excellent jobs
I read one of those bolts behind the hub is almost impossible to get without a special torx tool. Some of them have torx fasteners instead of the 15 mm bolt.. Is that correct? EDIT this must be later version. There's no tone ring on the axle either.
Excellent video and thank you for posting! Would you happen to know if this Ford Edge is the same has a 2013 Lincoln MKX AWD when it comes to performing the same job?
This was a big help. Im doing the front passenger side.
+Davarus Branigan Thanks for watching our video! 1aau.to/m/Shop-TRQ
Great video. Can you guys do a video on how to adjust the doors (driver and passenger side doors) for 2011 Ford Edge
Is this the same process for the front wheel bearings on the 2015 Edge? It would appear so.
Thanks man. Video helped me out. Broke your torx bit huh. Lol
Yeah great job you made the extraction look easy
Can you list all of the tools required?
Thanks so much. Very detailed and helpful.
something had to give, running that little torx in and out with the high powered air impact, do that one by hand people. you can see he snaps the bit off in the head of the bolt putting it back in.
+Carson Thanks for the tip! We'll pass this info along to our production team. 1aau.to/m/Shop-TRQ
Me to blew it right up!
Ummm yeah I think they realized that
Are the wheel hub and bearing assembly the same for all 4 tires?
+Griffen Weber Thanks for watching! The bearings assemblies are not interchangeable from front to back on this vehicle.
Nice camerawork. Thanks!
some video's show that the bearing bolts are a T60 torx head, these require a BMW flywheel /ford edge wheel bearing tool. Is that for ABS only?
The t60 version is for fwd this video shows an awd
@@dbo52 mines an all wheel drive and I have to use the t60 torx.
@@stevematthews9724 mine is awd, 2008. Mine came out with t55. Positive about this
My 2007 awd also uses the T60 special tool.
Where's the parking brake? Mine is getting caught on the brake rotor and I can't get it off, but it looks like this 2007 Ford Edge doesn't have one
My 2011 edge has abs ring on cv shaft, right in the way of the bolts??? Now what???
Thanks was a big help.
hi would this be the same for a 2015 edge Thanks
Ford 4WD Edges have some bad designs as PTU DRIVE TRAIN goes can't change the fluid on them unless u drill and tap drain and fill holes...they say it's not serviceable but it fails when the fluid goes bad and tears up the unit
Well done 😁👍
Is this the same on a Ford Kuga?
Great video... Thanks for sharing...
Thanks for the video 👍🏼
Same goes for 2007 Lincoln MKX right?
Yes
Perfect video 👍
great video - thanks
Is the Edge going to be the same as a 2013 Flex?
+Clifford Brammer The part in this video fits your application, and the install should be the same or similar. Buy this part on 1AAuto.com: 1aau.to/m/Shop-TRQ
Thank you for the guidance..
Mine wasn't the same the bolts are hard to get too
258 ft./lbs sounds crazy high
Watching this for my 11 mkx since ah wheel fell off
You make it look so damn easy
+Dylan Hutchinson Thanks for watching our video! 1aau.to/m/Shop-TRQ
Thank you this is a very good video to get the job done....
Straight snapped that torx bit off.
258 ft.lb. looked way too easy 😂🎉
anybody on youtube know how to to replace a wheel bearing on a 2013 ford escape
6:39 Doh!!!!!!
Thats what I need a bigger F-in hammer!!!