Hello @YOYODiagnostic 1st of all thank you for your work. About the ceramic resonator, there are some reworks where people use a quartz crystal, what are your thoughts on that? Since they have to add two extra capacitors, is it worth the hassle or from your experience the higher quality ceramic resonator will do the job? Thank you
Greetings from Dominican Republic, as always, thank you for so much real information that others don't say or show, today we have Autel, Launch and an immense clones of then, ( like TopDon, Foxwell , xtool and a bunch of others ).
Completely understand your pain, your work is much appreciated and I have subscribed to your channel because I can appreciate your hard efforts and what you have done for us all. I know it is not going to mean much but you have my word I am not out to make money on your hard work and only using it for my own personal use so thank you bro and glad I found your channel and look forward to seeing your content Cheers Nathan
hi, your rework is amazing and full rework , much better than what i found commonly used on internet , i will order the components and do rework on both KESS & KTAG, thanks
I had the chance to read my EDC16 with a Kess clone. It read the maps file one time then when I wanted to read it again after 10 mins, it didn't. I kept trying and it wouldn't read again. Very weird. For myself I bought a Galletto 4 (clone) and it worked everytime on EDC16 but I couldn't read DCM 3.4.
I have a Bosch mg1cs017 ECM from 2018 mustang and have a spare junkyard ECM that I'm not worried about. Will updating cloned KTAG to 2.70 library allow me to read my ECM and write to new one? Any help is appreciated
hello sir, I'm sorry before to ask here.. I have ADEC MTU genset engine control.. it's use mpc565 processor,there is bdm port.. can you give me advice what tool to bdm that cpu via bdm port? thanks before.. maybe you have email, I wanna discuss.. thanks
hello: I want to buy fc200 I have seen your videos and I like it but I don't know if it reads volvo edc16c34 I see that now there are some edc 16 but this one? On the other hand, what advises me to clone bsi citroen peugeot volvo? thank you so muchkees v2 unlock.:Good morning, maybe I have not explained myself well, I know that fc200 does not do edc 15 but now it does 16. My question is if it could read edc16 c34 volvo c30 1.6d 2008? On the other hand, I have kees 2 original, it will be blocked due to an update to kees 3 within 15 days. If I use the nxp chip, would it work as a master clone? I have drivers of version kees 2.47 kees 5.017. Where can I load the latest drivers? I plan to buy a kees v3 and I have bought the original v2 with 14 days to try it comes from an update and it is going to block ar. any ideas to evite blocking? or should i convert to clone? I already have a kees 2.47 red plate clone. Thanks friend, your disinterested videos help a lot of people. In andalucia spain very hot.....
![Фабричный KESS V2 с Алиэкспресс || Проверка Доработка [ Kess v.2 fw 5.017 ] Где купить](http://i.ytimg.com/vi/W9WSHv3-AFI/mqdefault.jpg)
Great video again. I fully understand your opinion about people without patience.
👍
Hello thanks for your videos. You have very good voice, very easy understand everything
👍
Where did you buy spares parts for this clone? Is it worth upgrading ?
@@aiviss9714
mouser.de
Hello @YOYODiagnostic
1st of all thank you for your work.
About the ceramic resonator, there are some reworks where people use a quartz crystal, what are your thoughts on that? Since they have to add two extra capacitors, is it worth the hassle or from your experience the higher quality ceramic resonator will do the job? Thank you
Thanks for the informative video. Much appreciated.
Greetings from Dominican Republic, as always, thank you for so much real information that others don't say or show, today we have Autel, Launch and an immense clones of then, ( like TopDon, Foxwell , xtool and a bunch of others ).
Hello.
It's true.
Thanks for watching . 👍
Completely understand your pain, your work is much appreciated and I have subscribed to your channel because I can appreciate your hard efforts and what you have done for us all. I know it is not going to mean much but you have my word I am not out to make money on your hard work and only using it for my own personal use so thank you bro and glad I found your channel and look forward to seeing your content
Cheers Nathan
👍
On my ktag there is no place for Murata Capacitor 4700? They are too small!
hi, your rework is amazing and full rework , much better than what i found commonly used on internet , i will order the components and do rework on both KESS & KTAG, thanks
👍
The 3 NPN E6327 under the capacitores are the same the 3 MMUN2113? Did you switch something?
Can we buy all these components as a kit
yoyo vc tem uma lista deste componente pra me passar outro detalhe esta melhoria nele o q melhora o ketag e o kess esta melhoria
Hola muchas gracias por el vídeo ,tengo una ktag original sclave se podría poner en máster con otro programa.
Cambia NPX
@@jeanro.8644 Cuál es ese chip?
@@josec3728 lpc2478
@@jeanro.8644 Y cambiando ese chip ya llega o ay que programar algo?sirve el programa que tengo de alientech?
@@josec3728 cambialo, por uno ya programado .
Hello very intéressant ,please can you explain how to fix transistors remplacement in PCM tuner ? Thk
Hello.
Yes I will do a video. 👍
I had the chance to read my EDC16 with a Kess clone. It read the maps file one time then when I wanted to read it again after 10 mins, it didn't. I kept trying and it wouldn't read again. Very weird. For myself I bought a Galletto 4 (clone) and it worked everytime on EDC16 but I couldn't read DCM 3.4.
Hello.
Galletto is a better experience for edc16 than Kess.
I have a Bosch mg1cs017 ECM from 2018 mustang and have a spare junkyard ECM that I'm not worried about. Will updating cloned KTAG to 2.70 library allow me to read my ECM and write to new one? Any help is appreciated
Hello.
Ktag clone it doesn't work with this ECU.
@@YOYODiagnostic do you have any recommendations for a tool that would be good for cloning this ECU?
@@AmpedElectronics
If you are looking for something original and cheap, check out the website at CGDI.
Thank you!
👍
My ktag 7.020 I had to change the SD card because it didn't communicate and now it doesn't open the protocols, could you help, thank you
+ Thanks + reputation ;) amazing videos
Thanks 👍
Thx for the video🥳
👍
Привет, а если честно - какой родной Ваш язык?
hello sir, I'm sorry before to ask here..
I have ADEC MTU genset engine control.. it's use mpc565 processor,there is bdm port..
can you give me advice what tool to bdm that cpu via bdm port? thanks before.. maybe you have email, I wanna discuss.. thanks
hello:
I want to buy fc200 I have seen your videos and I like it but I don't know if it reads volvo edc16c34 I see that now there are some edc 16 but this one? On the other hand, what advises me to clone bsi citroen peugeot volvo?
thank you so muchkees v2 unlock.:Good morning, maybe I have not explained myself well, I know that fc200 does not do edc 15 but now it does 16. My question is if it could read edc16 c34 volvo c30 1.6d 2008? On the other hand, I have kees 2 original, it will be blocked due to an update to kees 3 within 15 days. If I use the nxp chip, would it work as a master clone? I have drivers of version kees 2.47 kees 5.017. Where can I load the latest drivers? I plan to buy a kees v3 and I have bought the original v2 with 14 days to try it comes from an update and it is going to block
ar. any ideas to evite blocking? or should i convert to clone? I already have a kees 2.47 red plate clone.
Thanks friend, your disinterested videos help a lot of people.
In andalucia spain very hot.....
good job
Thanks
Hello Friend! I would like to ask a lot about Your Product, and perhaps order it .. speak Russian ...
Hello.
I'm not a seller.
I don't sell products. 👍
hello, can you help me with a lpc1788 nxp hex dump for fvdi 2015? Thank you
Hello.
I don't have that unfortunately.
Can you make such a product?
Hello
Of course I can, but unfortunately I don't have time for such a thing.