@@Trent-1436 the metal was about 2” wide and 30” long and about a 1/4” thick. Unfortunately I don’t know how the side pieces where bent it came with the boat as a single piece and I cut it in half to create two spots to mount lights.
I did a video on the run time but I wasn't expecting how long the battery (24C Marine Deep Cycle) to last as long as it did. I got to about 3.5 hours and I could have gotten about 4 hours but did not want to completely drain the battery.
Is there anyway to run all the lights on the front on one positive and one negative? That’s way you don’t have to run so many wires. It’s either called running them in series or parallel I can’t remember. I’m looking to do the same setup that’s why I ask.
I must say I like the 12” light bar for straight infront of the boat however when the marsh opens up I find it difficult to see the sides so that’s why I like the side mounted lights. My suggestion is go with the 2 pods so you can mount them slightly sideways to give you a better visual at night but still enough to see infront. Let me know if you have any other questions.
Yes the switches have individual ground wires per toggle then a larger master ground which I ran to the negative on the battery. Let me know if this makes sense or you have another question. I am here to help!
From what I remember I think it was 12 gauge I would say over sized for what I needed but I’d rather be on the safe side. Do you remember what gauge you used?
@@BCBackwaters me too, the only problem is on the lake where i am there are so many assholes with speed boats and wave boat that you get rocked from tip to tip all day long. i wondered how to mount my umbrella so it doesnt snap off.
Actually it was one bracket that came with the boat when I traded for it I just cut it into two. If you get a thin aluminum from Home Depot you should be able to bend it into shape but still hold solid. Let me know if you have any other questions!
@@Chalz108 Not sure only ever ran them a couple hours in the morning but I plan on doing a video soon just running the lights and seeing how long they last probably going to post it in 3 to 4 weeks so stay tuned I am also interested in seeing the outcome!
I always get the marine switch panel off Amazon but have noticed in the last 6 months they have been harder and harder to find I will link some in the comments tomorrow to help you out!
To be honest I’ve actually never tried. I’ve been in the marsh and had them running for atleast 1.5hr and no issue. If you would like I can make a video on this?
@@BCBackwaters man that would very helpful. Im doing the same exact set up and Im conflicted on how to run the cables from the back of ghe switch. All the components needed and what not. I tried looking at your bildge video for it as well.
@@OscarPerez-ec6eu Just to clarify once you have all the wires plugged into the rocker panel the panel itself should have two main wires for ground and power that go to the battery do you need to see how I made all the connections on the back of the panel also?
boss hog I’ve used this boat now for three years after running to my spot which is about 20 min then setting up about 75 decoys and stashing the boat all with lights on I’ve never come close to killing my battery. The lights are very efficient.
Merci beaucoup ❤❤❤❤❤❤❤❤
Great video do u know the dimensions of the metal u used and how were u able to get the bend in it for the side piece ?
@@Trent-1436 the metal was about 2” wide and 30” long and about a 1/4” thick. Unfortunately I don’t know how the side pieces where bent it came with the boat as a single piece and I cut it in half to create two spots to mount lights.
What size battery do you run?
@@leeburke2606 I can’t remember the exact ones but usually the Costco deep cycle battery either size has worked for me.
Do you have a video on how you installed the original switch? I'm trying to understand how you did that.
Yes I have a video on my channel of wiring up a switch panel.
@BCBackwaters great, I'm going to watch it now. Wanted to see how you ran wires from battery through back seat/cut foam/ wired up etc.
Thank you
Great little vlog! Thanks.
what battery are you running? how much run time are you getting with it?
I did a video on the run time but I wasn't expecting how long the battery (24C Marine Deep Cycle) to last as long as it did. I got to about 3.5 hours and I could have gotten about 4 hours but did not want to completely drain the battery.
Nice work dude.
Thank you!
Is there anyway to run all the lights on the front on one positive and one negative? That’s way you don’t have to run so many wires. It’s either called running them in series or parallel I can’t remember. I’m looking to do the same setup that’s why I ask.
Great job, I was JUST about to do almost the same thing, you saved me from several mistakes I would have made. Thanks... Nick.
Thanks for the comment! If you have any questions let me know!
How did you bolt bracket to the seat??
I was gonna install 2 4 inch pods or should I get a bar
I must say I like the 12” light bar for straight infront of the boat however when the marsh opens up I find it difficult to see the sides so that’s why I like the side mounted lights. My suggestion is go with the 2 pods so you can mount them slightly sideways to give you a better visual at night but still enough to see infront. Let me know if you have any other questions.
Did you have to ground the lights
Yes the switches have individual ground wires per toggle then a larger master ground which I ran to the negative on the battery. Let me know if this makes sense or you have another question. I am here to help!
@@BCBackwaters ok thanks I’m going to start trying to wire them in tonight
What gauge wire are you using I tried putting in light bar on my boat and melted the wite
From what I remember I think it was 12 gauge I would say over sized for what I needed but I’d rather be on the safe side. Do you remember what gauge you used?
did you mount and umbrella?
No I did not mount the umbrella to the boat but some summer days I wish I had!
@@BCBackwaters me too, the only problem is on the lake where i am there are so many assholes with speed boats and wave boat that you get rocked from tip to tip all day long. i wondered how to mount my umbrella so it doesnt snap off.
Great video! Is there a place u bought the brackets from or did u bend them yourself?
Actually it was one bracket that came with the boat when I traded for it I just cut it into two. If you get a thin aluminum from Home Depot you should be able to bend it into shape but still hold solid. Let me know if you have any other questions!
Thank you this video was really helpful.. have a blessed day!
Thank you, You too!
How big of a battery are you running?
I am using a 27DC Kirkland battery from Costco made by interstate. I got a deal on this one but I use to use a 24DC both worked great.
@@BCBackwaters thanks for the reply! How long does it last? Could you fish all night with it you think?
@@Chalz108 Not sure only ever ran them a couple hours in the morning but I plan on doing a video soon just running the lights and seeing how long they last probably going to post it in 3 to 4 weeks so stay tuned I am also interested in seeing the outcome!
@@BCBackwaters awesome yeah that would be a helpful video. I'll stay tuned for that one!
@@Chalz108 Just posted the video of the battery run time make sure you go watch it, you will be surprised!
nice vid this helped me learn really how wiring works on boats and gave me a good understanding
Awesome! Happy I could provide some knowledge! It’s actually very easy!
With all these lights how long does your battery last? And are you going through a breaker box? Do you recommend a breaker box?
My switch panel has built in fuses. Regarding run time I just posted a video on how long the battery will last!
Where did you get the switch panel?
I always get the marine switch panel off Amazon but have noticed in the last 6 months they have been harder and harder to find I will link some in the comments tomorrow to help you out!
How long does the lights last on a battery?
To be honest I’ve actually never tried. I’ve been in the marsh and had them running for atleast 1.5hr and no issue. If you would like I can make a video on this?
@@BCBackwaters please do! When you get the time
@@fishyenoughforme7877 I’ve got it on my list of videos to make I’ll try and squeeze it in over the next few weeks!
Video is just posted sorry for the delay. Make sure you go watch it!
What lights are you using and where did you get them?
kheeter11 Just using marine lights that I found on amazon they are fairly cheap and work great
Where did you get the brackets you are using for the two lights on each side?
Gary Harbison The brackets come with the lights when you order them on amazon
Thanks for the reply! Do you know which lights you had ordered from Amazon? Sorry for all the questions, I appreciate your help!
Not a problem. I ordered Simplive® 12" Inch 72W 7200LM... www.amazon.ca/dp/B0181RC68W?ref=ppx_pop_mob_ap_share
Are you using a regular car battery ?
Marine Battery
what size are the wires your running to the back?
Using 12ga wires probably a little overkill but I prefer over then under
Did you install fuses?
Yes the switch has built in fuses
Flat bar flexes to much I would recommend using L-Bar to make it more stable while running across the water. But looks good
Thanks for the suggestion I found mine didn’t move much but I did think about using an L bar to make it more stable.
You did a great job! We just didn't see how the cables attach the battery.
Hey Oscar I can create a video over the next day or two and post it of the cables connecting to the battery!
@@BCBackwaters man that would very helpful. Im doing the same exact set up and Im conflicted on how to run the cables from the back of ghe switch. All the components needed and what not. I tried looking at your bildge video for it as well.
@@OscarPerez-ec6eu Just to clarify once you have all the wires plugged into the rocker panel the panel itself should have two main wires for ground and power that go to the battery do you need to see how I made all the connections on the back of the panel also?
Yes that would be awesome 👌
@@OscarPerez-ec6eu Video is up! Hopefully it helps make sure to check out the diagram at the end!
Nice! How long will those run on a battery? I’d like to do this but don’t want the lights to die after an hour or so
boss hog I’ve used this boat now for three years after running to my spot which is about 20 min then setting up about 75 decoys and stashing the boat all with lights on I’ve never come close to killing my battery. The lights are very efficient.
BC_Backwaters awesome. Answers that lol. Thanks for the speedy reply bud. 👍🏻
@@tylerw1418 Just an update I made a video with battery run time. Actually better then I expected make sure you go watch it!
@@BCBackwaters hell ya buddy. Will do. Thanks
The brackets and flat bar are sweet! Do you get much rattle while running?
To be honest I thought it was going to and I was going to add a bracket but it doesn’t move at all so not going to put any bracket in.
Wire
Where did you get the brackets from?
I got the metal bracket from Home Depot is was just a 2" piece of aluminum. I cant recall the thickness.
The same with the bent brackets?
@@jonboatnationandstuff3301 No the bent brackets came with the boat originally had rod holder on it but they are also just thin bent aluminum