DJI Air 3: The Complete Disassembly and Reassembly Guide
ฝัง
- เผยแพร่เมื่อ 4 ส.ค. 2024
- In this repair guide, we walk you through every intricate step of taking apart and putting back together your DJI Air 3 drone.
Buy tools and parts on AMAZON:
Screwdriver Set: hfixt.com/mpro
Opening Tool Set: hfixt.com/pryt
Magnetic Mat: hfixt.com/mat
Tweezers: hfixt.com/tzrs
Global AliExpress:
Screwdriver set: hfixt.com/alis
Opening tool set: hfixt.com/alit
Magnetic Mat: hfixt.com/amat
Tweezers set: hfixt.com/altz
Drone Spare parts: s.click.aliexpress.com/e/_DBK...
Useful links
DJI Air 3 Gimbal Replacement Guide: • DJI Air 3 Gimbal Repla...
More DIY repair guides: how-fixit.com
DESCRIPTION
In this comprehensive DJI Air 3 Disassembly and Reassembly Guide, I'll show you the essential techniques and step-by-step processes to expertly take apart and put together your drone. Whether you're a seasoned enthusiast or a newbie, this tutorial will empower you with the knowledge to handle DJI Air 3 maintenance and repair broken parts. From understanding each component to mastering the intricate reassembly, this guide is your key to becoming a drone repair pro. Dive in now and elevate your drone skills to new heights!
🔧 Repair tools for DJI Air 3:
- Screwdriver set with Phillips 1 and Torx T5 screwdriver
- Tweezers
- Plastic pry tools
- Glue gun
- Magnetic mat (optional)
- Soldering iron (if you need to replace the ESC board or drone arm)
In this video, we cover:
- Step-by-step disassembly instructions for DJI Air 3
- Essential tools you'll need for the task
- Expert tips for a safety disassembly process
- Electronic Speed Controllers errors and troubleshooting
- Fixing navigation system error
- Proven techniques for reassembling your drone flawlessly
Time code:
00:00 Introduction to disassembly guide
00:12 Repair tools for DJI Air 3
00:41 Removing battery
01:03 Removing the bottom cover
02:15 Removing the gimbal camera assembly
04:45 Removing the mainboard
07:06 Opening the cover to access DJI enhanced image transmission module
08:38 Removing the top shell cover of the drone
10:08 Removing the GPS module
11:55 Removing the module with vision sensors
12:38 ESC board errors and troubleshooting
13:08 Removing the drone arm shaft
14:18 Removing front arm shaft
15:15 DJI Air 3 disassembled into parts
15:24 DJI Air 3 reassembly
35:00 Checking the operation of the drone
DISCLAIMER
This video intended for general information only. We will not accept any liability for damage or injury caused while following this guide. Any reliance you place on such information is therefore strictly at your own risk.
AFFILIATE PROGRAM
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
#howfixit #djiair3 #repair #doityourself - วิทยาศาสตร์และเทคโนโลยี
![[LIVE] : ONE ลุมพินี 73 วันนี้!! คู่เอก "วรพล vs พันฤทธิ์"](http://i.ytimg.com/vi/rrOljlqse3A/mqdefault.jpg)
*For more info check out the links in the description*
Where is the DEBUG port located?
please help me with this problem
@howfixit how to callibrate vision sensor after replacing the module
Thank you for this! I crashed and had to replace a broken arm, this took me through the entire process flawlessly.
To change the arm, did you follow all the steps, or did you just focus on freeing the arm and the welds?
I also crashed and I have to change an arm
Just broke an arm on mine too😩
Great video. Thanks, man. ✌🏻
Appreciate this content
Seriously impressive skills to me! Thank you, Like and subed
Parabéns. Very good !!
Nice 😊
Thank you for the wonderful video. I can't.
useful if you mention the antenna cables and which does what
Cảm ơn nhiều
Gracias👏👏👏🤘😘
Thanks for this. Can you show how to disassemble the front arm landing train?
10:12 What GPS receiver does it use (under that lower emi shield, usually a u-blox device)? Also, what’s that vibration isolated black box, and what’s in it?
Do u have a video of disassemply the battery?
Hello,
I just need to replace the top shell cover. Can I replace only this part or do I need to disassemble other parts beforehand to remove it?
Thanks.
Top ❤❤❤❤❤❤❤
How to calibrate vision sansor in DJI air 3
have you got any solution i am facing same
i had a problem with my air 3 it gains altitude by its own even if I want to land it won't land easily some times i had to grab it and had to turn it upside down please suggest me what settings should I go for
To change the rear arm must I do all this things?
Which one cable that connects between battery power to mainboard?
is there a way to take the motors off on the Air 3?
What is in the top. The 2 wires and what looks like a USB c after u removed the cover
that part at 3:20 holding the camera .. the housing .. where can i find the replacement for it?
Where is it better to stick the aluminum plate with the identification so that it produces less interference?
What's the empty space on the top of drone for??? Is it for an upgrade???
It's for a cellular dongle. Not available in the US, only China. Some have gotten it work in other countries but it's iffy and still sends data to Chinese servers which increases latency making it glitchy.
what thermal paste to use for the drone
How can I remove the motors from the arms?
Hallo :-) , is there a video to replace a motor? Thank's 👍:-)
Who else is here in summer 2024 to see how tf to open the enhanced transmission cover? xD
7:07
Hi, I recently purchased a Mavic Air 3, but unfortunately, it was involved in an accident within the first 24 hours. The drone was attempted to be flown by friend and crashed into a bus. Fortunately, the camera is undamaged, but the opposite side of camera body is severely crushed. I'm wondering if there's any possibility of repairing it ??
Can you show you what's the look inside camera sensor?
Of course, I will show it in the next video guide
How to remove and anti-tamper glue in second screw on body cover? Any advice from anybody would be appreciated.😊
Where is the fan?
Where is the DEBUG port located?
Can it be, that u re blind and stupid?
After changing the sensors during repairs its seems sensor is not working
What should I do now??
have you found any solution ?
If we power on the AIR 3 , we can hear a beep.. Where is that speaker located?
Likely on the main mother board unless im mistaken.
It's the motors.
how to calibrate vision sensor error
have you found any solution ?
Where is the Gimbal disassembly video?
DJI Air 3 Gimbal Replacement Guide -> th-cam.com/video/6XRaMMTEcf8/w-d-xo.html
Hello sir
Top❤❤❤❤❤