Great presentation! The only problem I see is trying to figure out if the valves are all perfectly closed. I don't know if it's practical to do without taking the valve cover off and inspecting the position of the camshaft lobes. I can figure out TDC by sticking a long rod down the spark plug hole.
My 2018 Nissan Pathfinder with 73000 miles has always ran great, no mechanical problems. about 2 months ago and only occasionally, not always it would blow white smoke out of the exhaust when I started it up. I took it to a mechanic who looked at the oil and said it was extremely dirty. I had regular oil changes. He changed the oil twice and put an additive in it. It still ran great no signs of mechanical trouble but within a week or so it would blow white smoke when i started it up. Not always. The about a week later it conked out on me and came to a stop. I had it towed to my house. The mechanic that said it blew a gasket without looking at it or testing it in any way. He is very busy and doesn't want to work on it. I am having it diagnosed by another mechanic, next week. Your video is very informative and I am hoping it is not a blown head gasket, maybe a valve, cylinder, spark plug or whatever. It starts right up and has a very faint sound from the engine if you listen closely. I'm not driving it at all until I find out what is the problem. The other mechanic seems to think someone put dirt or something in the oil to intentionally contaminate it??? Hope my problem is fixable. I'm 73 on fixed income and can't afford another car. Thank you.
Pete, thanks for the video. I've done some head gasket replacement before but it was a diesel with a cast iron block and head. I did check the head with a machined straight edge like you said. I've been really hesitant to mess with aluminum blocks due hearing you always have to machine them. I had heard the heat will cause the metal to distort a little. It's good to know that is not the case. Are there any tricks to removing the head bolts other than reversing the bolt tightening order to minimize distorting when removing? Now I might just have to tackle a project I have been putting off just for that reason.
Hey Troy, If it's still running you can crack the bolts while the engine is still hot, that will prevent stripping the threads. Loosen the head evenly. Let it cool before taking them out. If 1 or 2 get tight again you know the head move a little.
Hi Pete! I have a 96 Camaro Z28 will these test prove if I have an head gasket leak/oil. Car leaks just a drop here and there and oil looks good and the car doesn’t overheat. Thanks Pete very informative videos!
Wow, my mechanic said he was going to do everything you said, skim, gasket change, for £600+. Covid 19 forced him to cancel. Said the minor oil leak was the head gasket, no milky oil or coolant, no white smoke from the exhaust. But he also didn't do any tests. Got a 2nd opinion from a chap who was going to overhaul the Pierburg 2B5 Carb, asked him if he could change the head gasket, he asked why. No way he said, it's just your rocker cover gasket. Said the same as you Pete, can't leak oil from the head gasket! God works in mysterious ways! 👍
Amazing video once again!. Just thinking if someone is actually going for a head gasket replacement, what other parts should one change just as a precaution? Because as the mechanics say since you have opened up the engine, lets change other stuff that as well might break and would again require tearing up the whole engine. I think for a 20 year old engine with 180 km on it, valve seals and piston rings may be changed and about the main bearings and pistons themselves? At the same time i believe fixing something that ain't broke yet might cause some other problem due to human error. What does your experience say about that :)
To check for compression entering cooling system, I just take the hose off my cooling system pressure tester and put hose in a clear container of water and check for air bubbles.
Got pudding goo on oil cap. Little white smoke from oil dip stick area. Loosing coolant but the only leak i see is lower intake. 3800 engine, grand Prix. Always had some white smoke but not a big cloud. Oil itself is normal color. Pressure test isn't holding. My personal mechanic thinks it's intake. Auto shop didn't do leak down or dye, says head gasket. Doesn't seem like head gasket from most symptoms not showing, just seems like coolant leaking somewhere ...
I had the leak down test done as I've had several hoses fail with no apparent overheating, so there was bubbling in the collant reservoir at 90 psi on cyl 3 (6 cylinder engine)... mechanic said head resurface and gasket replacement. No mix of fluids anywhere. Is his diagnostic right? Alternative solutions? Thanks for your video. Very informative.
@@PetesGarage Thanks for sharing your opinion... Last question, Would a sealant additive be worth trying? The leak seems to be very small... Is it too bad to continue driving as it is?
I have a p0300 with misfires at 6 7 and 8 but mainly 8. Thing is I have zero symptoms no shake, no overheat, no smoke, fuel trims normal. No big coolant leaks but somehow I'm missing just a bit of coolant but the combustion test never hit yellow. Can I still have a very small leaking head gasket?
Question for you, as to what product and how much you think I should use. I have a 1995 Subaru 1.8L 4-CYL boxer Impreza, 177,000 miles. I have 76 and 78 PSI dry compression in #2 and 4 of one head (driver side). This started a few days ago, we noticed while on a highway trip the power was weak and I can hear it missing as the RPMs drop from driving to idle. I don't have overheating, excessive oil consumption (drippy seals, I add a quart about every 900 miles), smoking, or fluids cross contamination. I'm waiting to have a leak down and another dry/wet compression test at a different shop. The first shop only did dry compression and wasn't too bright or helpful. If I end up having a head gasket leak between those two cylinders, what products would I possibly try to mend it? It must not be too bad of a leak, whatever it is, for the compression to build to 78psi dry. The other two good cylinders are 130ish psi. If it ends up being a valve leak, what products and strength could I try to get them clean? After cleaning, I will have valve clearances checked, as it's probably never been done. Thanks much brother!
If I have milky fluid at the dipstick and inside of the oilfill spout, as well as bubbling in the overflow tank. All symptoms occurred within about a couple hundred mile window. Think it's possible that just the head gasket is compromised or more likely the block is also cracked or a valve or piston is cracked? Or is there another way to determine more specifically if it is the head gasket or cracked head or cracked valve and or piston? Thanks for caring enough to help us out!! Much appreciated couldn't do it without you!😎
You could do the second leak down test I performed. If the block or head is cracked you will see air bubbling in the reservoir. A cracked piston would leak into the crankcase and you would have to take of the head to be 100% sure on that one.
Also if you have the head surfaced you only have a set amount that can be removed so if you have it machined when you don't need to and for some reason the gasket goes and warps the head a little you may not be able to have it repaired because there's not enough material left because you had it cut originally for no reason.
I wish I had you work on my car. I was losing antifreeze after feeling up reservoir. Shop conducted pressure test on engine and said it passed. They installed new water pump and once everything was put back together the antifreeze in the reservoir started bubbling.
How can i stop small leak on head gasket.engine oil leak out very small amount.i always wash my engine if it catch my eye.but it still ok since it not mix my coolant.
Hello, so I wanted to know why are things never 100%, why is there always a leak, does the leak prevent the engine from blowing up; does the leak balance out the different kinds pressures????
Like said it doesn't matter if it leaks within that acceptable small amount. I think it's not 100% perfect (if that possible) because it would be more expensive to overengineer it for that when the end result would be very similar / the same As we all know balloons leak but do the job for the day or two they are inflated. Then those foil balloons last longer but more expensive.. That's my take on it. Always about the cost v fit for purpose
Can a bad rocker arm cause compression issues? I have a p219a code which is air/fuel imbalance. Can a leakage in the cylinder cause this code? Thank you
Dude,as soon as your car is in someone's garage as soon as you question anything THEY blow a gasket......that's why I learned on my own .....u go to get a head gasket done you'll be in for a valve job and resurfacing for sure....valve stem seals.the whole nine.
Hey, I have a case of vanishing coolant. No milk in the oil, no low cylinder pressure. Could a pressure test on the coolant system tell me that one of the gaskets is bad? I was thinking either intake manifold or head gasket would be blown if the pressure goes down provided there are no other obvious leaks.
I have a 02 camaro ls1, got ported heads, cam, valvetrain etc done. Problem is once i got the work done car overheats only with ac on, on hot summer days 85° and up. New radiator, new fans, 160 tstat, new cap, new overflow tank, mls head gaskets were installed during the mods. Bled the cooling system multiple times. Car will overheat on both city and highway driving (again only with ac on). Turn ac off and temps drop back down, can drive the car all day without ac and wont overheat. Can drive the car with ac on cooler weather and wont overheat. Idk what else to check for or what to do.
I needed this Video, Im 16 and Just bought a 1999 Ford F-150 Triton and I Believe it has a Head Gasket Leak but I'm not Sure. It doesn't Overheat or Even really Change within a 40 Minute Drive. The Coolant Resivour is A Mirror Black and Not Frothy/Milky, Just A Mirror Black. The Engine Starts AMAZING, Not even Hesitating... The Oil Dipstick Seems to be Normal. I'm having the Coolant Flushed next week to See if that Clears up the Coolant or it it gets bad again. I don't know much about cars and I don't have anyone around who can help me... Any thoughts from Anyone would be Appreciated. Thanks! 👍🏼
RuggedRebel57 I would have the coolant flushed and then keep an eye on it. It's possible that it will turn dark again if it's really dirty. As long as it's not overheating and or losing coolant i don't think you need to worry.
8:39 I know this video was 4 years ago, but I hope you replaced that orange hose that is kinked up on the snap on cylinder leakdown tester before 90+ psi of pressure explodes in your face. A lot of things could've happened in those 4 years.
I just watched a video with similar looking gauge but not snapon. When calibrated right gauge was fully clockwise when 1st gauge was just at 20 psi. His cylinder showed 100 leakdown but flow at 20 psi was so little he couldn't detect where leakage was coming from. I'm puzzled about big difference in psi on 1st gauge.
I got a 1999 3.3l dodge grand caravan and when I start it in the morning and drive, it drive perfect until the temperature gauge get to the middle spot, and now the engine start to miss fire and drive badly, if I left the car off for 8 hours it would drive perfect again until it heat up and so and so, I hope you can help me with that problem before I take to a mechanic and get ripped off. Thanks in advance.
@@PetesGarage thank you so much for replying Pete, l changed the coil a week ago and it didn't help, some mechanic told me that it could be a head Gasket, he said when the car heat's up the water can get in true the head Gasket into the cilinder and that's why the misfire happen, I don't know if should change it because that's a big job.
Checking the oil cap is in no way an indication of head gasket. If you have a bad oring around that cap condensation and water gets in that spot and causes milk color. Common as hell. Just sayin
"The more you know, the less you get ripped off." So guys, get educated in car maintenance and don't ever get ripped off. Not all auto mechanics are honest.
I have dihatsu coure car.when it starts air bubbles comes out with smelly compression gas.then I noticed that considerable amount of coolent available on the 2 nd piston of the cylinder.I removed that plug and started again.coolent comes out from the plug hole.this engine never over heated or boiled.what can be the reason? please reply me.
So my 97' honda odyssey with 320,000 miles has upper and lower radiator hoses only a year old that collapse. Then the radiator empties to about a 3rd to a 1/4 coolant bottle low but while the overflow reservoir is full and overflowing at the same time and Pisses on the ground. There is rusty like sediment in the radiator and only the new cap I put on and its a tiny bit cloudy. I think this is original radiator from 1997 but I don't know it's a single one owner before me. Is my head gasket leaking or should I just overhaul and get new hoses (entire engine) new radiator, thermostat, housing,temp sensor and water pump or what? Much appreciated of anyone's help thanks 😊
@Pete's Garage yep very true but it's sort of sentimental. It used to be my house after my girlfriend cheating on me and never gave me much of an issue even with the mileage. If it's not worth it I guess this is time to let her go :(
Enjoyed many of your videos, good, technical & to the point. This was terrible, its like you're doing show & tell and talking to Children in Kindergarten.
I got to say, I really enjoyed Pete's carnival of balloon parlor tricks.
I thought it would make it easier to understand what the test is doing. Gotta have a little fun.....lol
Great stuff Pete! You're like Click and Clack, but with more knowledge and a little less wise cracks. Helping us all keep the mechanics honest.
That's funny, thanks
Thanks for the tests.
351 windsor, overheating, bubbles in the radiator, rusted out muffler but oil is not contaminated.
I wish I saw this video before now! You make the best videos! Keep them going!
Thanks you so much my friend
Great presentation! The only problem I see is trying to figure out if the valves are all perfectly closed. I don't know if it's practical to do without taking the valve cover off and inspecting the position of the camshaft lobes. I can figure out TDC by sticking a long rod down the spark plug hole.
You could take out each spark plug to see when it is at the top of the compression stroke
My 2018 Nissan Pathfinder with 73000 miles has always ran great, no mechanical problems. about 2 months ago and only occasionally, not always it would blow white smoke out of the exhaust when I started it up. I took it to a mechanic who looked at the oil and said it was extremely dirty. I had regular oil changes. He changed the oil twice and put an additive in it. It still ran great no signs of mechanical trouble but within a week or so it would blow white smoke when i started it up. Not always. The about a week later it conked out on me and came to a stop. I had it towed to my house. The mechanic that said it blew a gasket without looking at it or testing it in any way. He is very busy and doesn't want to work on it. I am having it diagnosed by another mechanic, next week. Your video is very informative and I am hoping it is not a blown head gasket, maybe a valve, cylinder, spark plug or whatever. It starts right up and has a very faint sound from the engine if you listen closely. I'm not driving it at all until I find out what is the problem. The other mechanic seems to think someone put dirt or something in the oil to intentionally contaminate it??? Hope my problem is fixable. I'm 73 on fixed income and can't afford another car. Thank you.
I hope it's nothing serious
Loved this episode, very educational.
I try to make them all that way, thanks
That was Yamaha jetski cylinder head that you were holding at the end.... What happened to that jetski engine rebuild?
Yes it was, I'm still working on it between projects.
Pete, thanks for the video. I've done some head gasket replacement before but it was a diesel with a cast iron block and head. I did check the head with a machined straight edge like you said. I've been really hesitant to mess with aluminum blocks due hearing you always have to machine them. I had heard the heat will cause the metal to distort a little. It's good to know that is not the case. Are there any tricks to removing the head bolts other than reversing the bolt tightening order to minimize distorting when removing? Now I might just have to tackle a project I have been putting off just for that reason.
Hey Troy, If it's still running you can crack the bolts while the engine is still hot, that will prevent stripping the threads. Loosen the head evenly. Let it cool before taking them out. If 1 or 2 get tight again you know the head move a little.
@@PetesGarage awesome! Thanks.
Hi Pete! I have a 96 Camaro Z28 will these test prove if I have an head gasket leak/oil. Car leaks just a drop here and there and oil looks good and the car doesn’t overheat.
Thanks Pete very informative videos!
Yes, it could
Thanks for another informative video Pete.
Thanks James
Nice video as always. Here where I live head skimming is about 15$ so i do it anyways its not that expensive.
what planet was that again?🤣
That is pretty cheap, I think you meant $150
@@rissals8071 a little steep for just a haircut. Maybe some shampoo too.🤣
Wow, my mechanic said he was going to do everything you said, skim, gasket change, for £600+. Covid 19 forced him to cancel. Said the minor oil leak was the head gasket, no milky oil or coolant, no white smoke from the exhaust. But he also didn't do any tests. Got a 2nd opinion from a chap who was going to overhaul the Pierburg 2B5 Carb, asked him if he could change the head gasket, he asked why. No way he said, it's just your rocker cover gasket. Said the same as you Pete, can't leak oil from the head gasket!
God works in mysterious ways! 👍
That's awesome...good for you Russell
You can easily see if the leak is from cylinder head or valve cover gasket your self
Amazing video once again!. Just thinking if someone is actually going for a head gasket replacement, what other parts should one change just as a precaution? Because as the mechanics say since you have opened up the engine, lets change other stuff that as well might break and would again require tearing up the whole engine.
I think for a 20 year old engine with 180 km on it, valve seals and piston rings may be changed and about the main bearings and pistons themselves? At the same time i believe fixing something that ain't broke yet might cause some other problem due to human error. What does your experience say about that :)
The only thing I would recommend on a high mileage engine would be a head rebuild and valve job. Everything else requires pulling the engine.
Great explanation, Pete.
Thanks my friend
To check for compression entering cooling system, I just take the hose off my cooling system pressure tester and put hose in a clear container of water and check for air bubbles.
Great tip, thank you
Or remove the cap from the expansion tank and put a balloon over it. If it inflates, you’re getting combustion pressures into your cooling system
Good video. Pete what do you think of using gasket sealer with a head gasket?
Thanks J....never use anything on a head gasket unless the manufacturer recommends it.
Got pudding goo on oil cap. Little white smoke from oil dip stick area. Loosing coolant but the only leak i see is lower intake. 3800 engine, grand Prix. Always had some white smoke but not a big cloud. Oil itself is normal color. Pressure test isn't holding. My personal mechanic thinks it's intake. Auto shop didn't do leak down or dye, says head gasket. Doesn't seem like head gasket from most symptoms not showing, just seems like coolant leaking somewhere
...
Year old water pump, doesn't look like leaking. Just seems like leaking around intake
Ya mean losing?
Good demonstration Pete
Thanks my friend
Great Video especially when getting something you just bought checked out!
Yes! Thank you!
Awesome PSA Pete!
Thanks Mike
I had the leak down test done as I've had several hoses fail with no apparent overheating, so there was bubbling in the collant reservoir at 90 psi on cyl 3 (6 cylinder engine)... mechanic said head resurface and gasket replacement. No mix of fluids anywhere. Is his diagnostic right? Alternative solutions? Thanks for your video. Very informative.
I'm not sure about head resurfacing. The hoses can fail from heat and pressure. 90 psi is a little low
@@PetesGarage Thanks for sharing your opinion... Last question, Would a sealant additive be worth trying? The leak seems to be very small... Is it too bad to continue driving as it is?
It's always worth trying first.
I have a p0300 with misfires at 6 7 and 8 but mainly 8. Thing is I have zero symptoms no shake, no overheat, no smoke, fuel trims normal. No big coolant leaks but somehow I'm missing just a bit of coolant but the combustion test never hit yellow. Can I still have a very small leaking head gasket?
It could be
Question for you, as to what product and how much you think I should use. I have a 1995 Subaru 1.8L 4-CYL boxer Impreza, 177,000 miles. I have 76 and 78 PSI dry compression in #2 and 4 of one head (driver side). This started a few days ago, we noticed while on a highway trip the power was weak and I can hear it missing as the RPMs drop from driving to idle.
I don't have overheating, excessive oil consumption (drippy seals, I add a quart about every 900 miles), smoking, or fluids cross contamination. I'm waiting to have a leak down and another dry/wet compression test at a different shop. The first shop only did dry compression and wasn't too bright or helpful.
If I end up having a head gasket leak between those two cylinders, what products would I possibly try to mend it? It must not be too bad of a leak, whatever it is, for the compression to build to 78psi dry. The other two good cylinders are 130ish psi.
If it ends up being a valve leak, what products and strength could I try to get them clean? After cleaning, I will have valve clearances checked, as it's probably never been done.
Thanks much brother!
You could try any of the head gasket sealants, but follow the directions exactly
If I have milky fluid at the dipstick and inside of the oilfill spout, as well as bubbling in the overflow tank. All symptoms occurred within about a couple hundred mile window. Think it's possible that just the head gasket is compromised or more likely the block is also cracked or a valve or piston is cracked? Or is there another way to determine more specifically if it is the head gasket or cracked head or cracked valve and or piston?
Thanks for caring enough to help us out!! Much appreciated couldn't do it without you!😎
You could do the second leak down test I performed. If the block or head is cracked you will see air bubbling in the reservoir. A cracked piston would leak into the crankcase and you would have to take of the head to be 100% sure on that one.
Does each cyl have to be at TDC for the leak down test? Thks
BDC
@PetesGarage can you tell me how I know I am at bdc. Never used bdc. Appreciate it
.jc
TDC not BDC
Also if you have the head surfaced you only have a set amount that can be removed so if you have it machined when you don't need to and for some reason the gasket goes and warps the head a little you may not be able to have it repaired because there's not enough material left because you had it cut originally for no reason.
That is true
I wish I had you work on my car. I was losing antifreeze after feeling up reservoir. Shop conducted pressure test on engine and said it passed. They installed new water pump and once everything was put back together the antifreeze in the reservoir started bubbling.
The water pump could have been part of it
I learned a lot from visiting youtube like changing master/slave cylinder, changing clutch, and changing flywheel.
Great to hear!
@@PetesGarage Thank you!
How can i stop small leak on head gasket.engine oil leak out very small amount.i always wash my engine if it catch my eye.but it still ok since it not mix my coolant.
You could try one of those additives to see if it works. I have used them successfully.
Can I put compressed air in cylinder and watch radiator leak Pete ?
Sure
Hello, so I wanted to know why are things never 100%, why is there always a leak, does the leak prevent the engine from blowing up; does the leak balance out the different kinds pressures????
I can tell you that everything leaks. There is no such thing as something that is 100% leak free. It's a matter of how much it leaks.
Like said it doesn't matter if it leaks within that acceptable small amount. I think it's not 100% perfect (if that possible) because it would be more expensive to overengineer it for that when the end result would be very similar / the same
As we all know balloons leak but do the job for the day or two they are inflated. Then those foil balloons last longer but more expensive..
That's my take on it. Always about the cost v fit for purpose
Can a bad rocker arm cause compression issues? I have a p219a code which is air/fuel imbalance. Can a leakage in the cylinder cause this code? Thank you
It is possible
Dude,as soon as your car is in someone's garage as soon as you question anything THEY blow a gasket......that's why I learned on my own .....u go to get a head gasket done you'll be in for a valve job and resurfacing for sure....valve stem seals.the whole nine.
That's the truth, thanks Chris
Great video! Thanks for your channel man!
My pleasure!
Great demonstration. Keep it up. Thanks.
Thanks for watching!
Hey, I have a case of vanishing coolant. No milk in the oil, no low cylinder pressure. Could a pressure test on the coolant system tell me that one of the gaskets is bad? I was thinking either intake manifold or head gasket would be blown if the pressure goes down provided there are no other obvious leaks.
Yes
I have a 02 camaro ls1, got ported heads, cam, valvetrain etc done. Problem is once i got the work done car overheats only with ac on, on hot summer days 85° and up. New radiator, new fans, 160 tstat, new cap, new overflow tank, mls head gaskets were installed during the mods. Bled the cooling system multiple times. Car will overheat on both city and highway driving (again only with ac on). Turn ac off and temps drop back down, can drive the car all day without ac and wont overheat. Can drive the car with ac on cooler weather and wont overheat. Idk what else to check for or what to do.
Radiator may not be big enough to handle additional heat
Make sure ac fan kicks on
I needed this Video, Im 16 and Just bought a 1999 Ford F-150 Triton and I Believe it has a Head Gasket Leak but I'm not Sure.
It doesn't Overheat or Even really Change within a 40 Minute Drive.
The Coolant Resivour is A Mirror Black and Not Frothy/Milky, Just A Mirror Black.
The Engine Starts AMAZING, Not even Hesitating...
The Oil Dipstick Seems to be Normal.
I'm having the Coolant Flushed next week to See if that Clears up the Coolant or it it gets bad again.
I don't know much about cars and I don't have anyone around who can help me... Any thoughts from Anyone would be Appreciated. Thanks! 👍🏼
RuggedRebel57 I would have the coolant flushed and then keep an eye on it. It's possible that it will turn dark again if it's really dirty. As long as it's not overheating and or losing coolant i don't think you need to worry.
I agree with wysetech..... see what happens after the flush
Oh gosh that shot of the pin in the end of the balloon was intense
It's all drama...lol
8:39 I know this video was 4 years ago, but I hope you replaced that orange hose that is kinked up on the snap on cylinder leakdown tester before 90+ psi of pressure explodes in your face. A lot of things could've happened in those 4 years.
Sure did
Great!
I just watched a video with similar looking gauge but not snapon. When calibrated right gauge was fully clockwise when 1st gauge was just at 20 psi. His cylinder showed 100 leakdown but flow at 20 psi was so little he couldn't detect where leakage was coming from. I'm puzzled about big difference in psi on 1st gauge.
Interesting, I'd have to see the video
I got a 1999 3.3l dodge grand caravan and when I start it in the morning and drive, it drive perfect until the temperature gauge get to the middle spot, and now the engine start to miss fire and drive badly, if I left the car off for 8 hours it would drive perfect again until it heat up and so and so, I hope you can help me with that problem before I take to a mechanic and get ripped off. Thanks in advance.
Usually, a bad ignition coil may cause a misfire when the engine warms up
@@PetesGarage thank you so much for replying Pete, l changed the coil a week ago and it didn't help, some mechanic told me that it could be a head Gasket, he said when the car heat's up the water can get in true the head Gasket into the cilinder and that's why the misfire happen, I don't know if should change it because that's a big job.
You can test for a bad head gasket first
@@PetesGarage thank you so much I'll do that 👍
If the coolant in the reservoir bubbles but the engine doesn't overheat..is that symptomatic of head gasket leaking compression into coolant?
That or it's just overheating
@@PetesGarage luckily issue was only a hole in a heater hose. Replaced the hose and no more bubbles.
What if the coolant and the transmission oil dried out same time...can a blown head gasket cause that ro be happening?
Coolant yes, transmission no. That sounds like a bad radiator
Checking the oil cap is in no way an indication of head gasket. If you have a bad oring around that cap condensation and water gets in that spot and causes milk color. Common as hell. Just sayin
That is true
Very very nice video 🙏👍👍
Thanks Bob
"The more you know, the less you get ripped off." So guys, get educated in car maintenance and don't ever get ripped off. Not all auto mechanics are honest.
Unfortunately that is true
I have dihatsu coure car.when it starts air bubbles comes out with smelly compression gas.then I noticed that considerable amount of coolent available on the 2 nd piston of the cylinder.I removed that plug and started again.coolent comes out from the plug hole.this engine never over heated or boiled.what can be the reason?
please reply me.
Blown head gasket
If your oil is way overfilled all the sudden cracked warped or overall blown heads
Interesting
Thanks Pete you’re the man! 😄
Thanks Gabe
_Pete's Party Tricks and Pistons_ - You'll learn things....and get a free leaking balloon animal...
It's all fun and games until someone whips out a balloon
@@PetesGarage
"Back to work, you clowns!"
Thanks 🙏🌹👋
Welcome 😊
GREAT video.
Glad you enjoyed it
So my 97' honda odyssey with 320,000 miles has upper and lower radiator hoses only a year old that collapse. Then the radiator empties to about a 3rd to a 1/4 coolant bottle low but while the overflow reservoir is full and overflowing at the same time and Pisses on the ground. There is rusty like sediment in the radiator and only the new cap I put on and its a tiny bit cloudy. I think this is original radiator from 1997 but I don't know it's a single one owner before me. Is my head gasket leaking or should I just overhaul and get new hoses (entire engine) new radiator, thermostat, housing,temp sensor and water pump or what? Much appreciated of anyone's help thanks 😊
That's quite a bit of money to put into a '97 Odyssey
@Pete's Garage yep very true but it's sort of sentimental. It used to be my house after my girlfriend cheating on me and never gave me much of an issue even with the mileage. If it's not worth it I guess this is time to let her go :(
Goner..that kind of mileage and the year plus the issues you mentioned it isn't worth it. Time to turn it into a new bicycle.
@@joemiller2629 lol makes sense or a beater corolla civic or carry lol
@garrettwalravema❤n2552 makes no sense.
Enjoyed many of your videos, good, technical & to the point. This was terrible, its like you're doing show & tell and talking to Children in Kindergarten.
Some things need to be explained in the most basic of terms so everyone can understand
If I'm the first comment can you fix my engine on the house. You could do a video on it...lol
It would be difficult to fix on the house, up and down the ladder hundreds of times......lol
@@PetesGarage 😂
5:00 is that a Chevy cruze??
Ooooh no 😢😢😢
Nope
Why is he shouting, why cant Americans make a video without shouting
It's a function of the cheap microphone in the camera. I have since upgraded.