You say refer to your manual. WHAT MANUAL???!!! The motor did not come with one! Good video, though and thank you. I STILL haven't got the bike to move except in the "Walking Man" icon. Or about 4 mph. I even bought a new contoller, a device to check the contoller and new pedal assist sensor. I REALLY NEED THIS TRIKE, as I'm handicapped and it's my only form of transportation. My next purchase would be a new twist throttle. No bike shops around here will work on a bike they didn't sell and I built my own. Any help.would be appreciated!
This video really save my e bike my pedal assist has been kicking in and off. Because my motor came 48v 1000w. The pedal assist has 8 magnets.that come with the kit. But didn’t fit my bike. So I bought an after market pas sensor. 12 magnet. I started experiencing some strange kicking in and off when pedaling. After watching this video. I switched to to 12 magnet on the on the display screen. On num 13. Where he spoke about you can choose either 5, 8 or 12 magnet. Originally mine was set at num 8. So I change it to num 12. Because The pas I bought was 12 magnet. But now it’s zoom zoom zoom. Wow. Thanks a million. and it work really fine thanks a million
Great video! Any chance you have info on the RadBikes controller os version of the 900? There are only 3 settings/options given after the up&down arrow hold. First is wheel size, second is speed limiting (in km/hr) but no display info is given on the 3rd setting which has options of setting 1, 2, or 3.
hello! I mess something in my bigstone c300s display and the [assist] is not show in the bottom left main screen anymore and the PAS stop working. the rest is fine you know what config [+][-] menu I need to change to re-enable it again? it have 3 configuration menus
Can I perform a firmware reset without worrying that the motor parameters will be changed afterwards? I have no data on my engine. So the factory condition is the condition of the controller where I got it? or did the seller adjust it so that it works and after the firmware reset nothing works anymore?
Hi very intéressant vidéo and thx for it. M’unissiez is that I can t enter thé program mode (pressing thé 2 arrows for 3 secs can only reset thé timer and daily podometer ). Any tip unlock it ?
I saw my setting for tire size was 24 inch and my tires are 20 inch ? Isn't the wrong tiire size in the settings going to mess up the correct mph and milage ?
Yes. It’ll say you’re going faster than you actually are. The bigger tires need more power to turn and will carry you farther at the same rpm compared to the 20” tires. So change the tire size or throw on some bigger wheels to go faster.
@@vs4571 yup i changed it to 20 but i keep hearing about others who made some changes and we're able to throttle at a higher at a higher speed. I made few charges but still top of a 20 ?
It's sad my 1200w kit can't go but about 30mph. And my last 1000w kit was able to hit 45.5mph, or the max speed it would give before it would immediately cut the power from the bike. Unless I was giving it a 52v 17.5ah battery hence why it was so powerful. It was pulling 1800w at the most. This new 1200w kit is okay..but I wish I could get it back up to 45mph at the most so I could get around places easily. Speedhacking these aren't easy.
It also depends on what controller you have. I have an off-road e-scooter with 1500 watts, whose cables are 4 times thicker than those of these 1500 watt bike controllers. The battery (4x12v agm) from the scooter has a 60 ampere fuse built in, from which you can call up 40-50 amps as continuous output. These ebike controllers, however, only have a continuous output of 17 - 18 amps and briefly go up to 35 or so high. I can do about 30 mph with my 1500w kit and the acceleration is poor until I reach 9 - 13 mph, only then does it start accelerating faster. At first I thought the dealer had ripped me off and sent me a motor with less watts, but according to the display the consumption is actually 1300-1400 watts.
Hello how to turn on the display light on an electric bike ? My my bicycle display does not have brightness turned on. especially at night it's very hard without a bright screen
Hello everyone, I changed the settings and the bike doesn't work anymore Someone knows how to Reset the settings to return to factory settings ? My Bicycle Model RKS RS3 PRO X
Hi, very helpful video, learnt a lot from it. 1 issue I have is, I bought the new ebike motor where the controller is built into the motor, it is a 48v 1500w I had to increase torque via increasing amps. I had a 48v 1500w motor before my current, it died on me unfortunately. But the power from the old one was a lot more better than my current one. I noticed my current motor is only displaying a maximum output wattage of around 800, whereas my old one, would at times, display over 1600 watts. Is there any way where I can unlock more wattage output for my current motor? Thanks
My bike does not enter into the programming mode when I hold the 2 buttons. Is there another way I can increase the speed limit? (My bike is an EVox kab 375)
If our kit has no paddle assist with it or has a single mode paddle assist can we modify it to PAS with modes? please if any video available there regarding the same. Thank you
I changed the top speed limit to max, but when I reach 25km the bike still limits the speed. It feels different, like if the bike is braking. Is there any solution to this? I have the kt-lcd3
@@AugustineEBikes you mean while biking? Yeah, the ASSIST value is set to 5 while reaching the 25km/h and the brakes hit. Even The brakes icon flashes when this happens, as if there is another system or configuration to change. To test this issue, I changed the Wheel Diameter to 6’’ instead of 29’’ in order to “fool” the device and reading a slower speed, but when reaching around “real” 25km/h it still slows down (the displays shows a much slower speed like 5km/h when this happens but its definitely running at around 25km). Could there be another system that tracks the speed and deactivates the motor? Another thing that I found after changing the Wheel Diameter is that the throttle function won’t stops at 6km/h as it used to, but now it holds up to 25km/h before shutting down (while again the display shows a lower speed reading). So, the change in the Wheel Diameter indeed changed something but not the overall top speed. Thanks in advance
Isn't it that magnet sensor, in the rear wheel? You can fool that by putting the magnet on your pedal and changing the place of the sensor. It will detect a way lower "speed" and give you more juice. I think there are video's about this. That is... "IF" it has a magnet sensor.
The problem is a lot of these bikes don't come with manuals....which is dumb...but expected because China is the KING of doing things half assed. My display has 17 P settings.....Like how the hell am I supposed know what to do? It will be one long ass hell trial and error. made in China is made half assidly.
trouble with S866 controller - when I press my + - buttons I do not get the P programmes - I only get 4 dashes at bottom of screen - you can scroll through and change to some letters and 0-9 numbers - no idea what to do ! can anyone help
@@colevisuals111 thanks for your help - company eventually got back to me and gave me a different password 6666 - hope this helps anyone else out there
Unfortunately will lose your trip distance every time you turn the battery off, however it does not effect the odometer. So in order to keep track of your trip distance remember where your odometers mileage was when you started.
Hey Einstein ... before you go insulting someone who just took the time to create a Free Video full of information for you... maybe you should know what the F you are talking about ! *IT'S SINE WAVE !*
You say refer to your manual. WHAT MANUAL???!!! The motor did not come with one! Good video, though and thank you. I STILL haven't got the bike to move except in the "Walking Man" icon. Or about 4 mph. I even bought a new contoller, a device to check the contoller and new pedal assist sensor. I REALLY NEED THIS TRIKE, as I'm handicapped and it's my only form of transportation. My next purchase would be a new twist throttle. No bike shops around here will work on a bike they didn't sell and I built my own. Any help.would be appreciated!
Exactly. Some guidance would have been helpful. Like "if you have X motor, use Y setting", etc.
This video really save my e bike my pedal assist has been kicking in and off. Because my motor came 48v 1000w. The pedal assist has 8 magnets.that come with the kit. But didn’t fit my bike. So I bought an after market pas sensor. 12 magnet.
I started experiencing some strange kicking in and off when pedaling. After watching this video. I switched to to 12 magnet on the on the display screen. On num 13. Where he spoke about you can choose either 5, 8 or 12 magnet. Originally mine was set at num 8. So I change it to num 12. Because The pas I bought was 12 magnet.
But now it’s zoom zoom zoom. Wow. Thanks a million. and it work really fine thanks a million
if your kit is 48v 1000w it should run at 20amps. if it is limited to 12 amp thats only 600watts.
Mines on 26amps
Can I not change the max limit speed for level 1 to 5 with just throttle not pedal assist
thanks this video was much better than the last one thum,bs up ,man
What if i upped my controllers voltage would it increase the speed ?
You video was very helpful thank you so much.the video was perfect for a beginner like me :)
Great video! Any chance you have info on the RadBikes controller os version of the 900? There are only 3 settings/options given after the up&down arrow hold. First is wheel size, second is speed limiting (in km/hr) but no display info is given on the 3rd setting which has options of setting 1, 2, or 3.
Found it, 3rd setting is the BackLight according to supplier video description finally found.
Vince
hello! I mess something in my bigstone c300s display and the [assist] is not show in the bottom left main screen anymore and the PAS stop working. the rest is fine
you know what config [+][-] menu I need to change to re-enable it again? it have 3 configuration menus
Hello and welcome to this video....
Please check your manual. .. again check your manual. .
Thanks for watching
Does it work with vivi ebike
Can I perform a firmware reset without worrying that the motor parameters will be changed afterwards?
I have no data on my engine.
So the factory condition is the condition of the controller where I got it? or did the seller adjust it so that it works and after the firmware reset nothing works anymore?
Hi very intéressant vidéo and thx for it. M’unissiez is that I can t enter thé program mode (pressing thé 2 arrows for 3 secs can only reset thé timer and daily podometer ). Any tip unlock it ?
Cosa dovrei acquistare per queste migliorie esiste qualche display già programmato?
I saw my setting for tire size was 24 inch and my tires are 20 inch ? Isn't the wrong tiire size in the settings going to mess up the correct mph and milage ?
Yes. It’ll say you’re going faster than you actually are. The bigger tires need more power to turn and will carry you farther at the same rpm compared to the 20” tires. So change the tire size or throw on some bigger wheels to go faster.
@@vs4571 yup i changed it to 20 but i keep hearing about others who made some changes and we're able to throttle at a higher at a higher speed. I made few charges but still top of a 20 ?
Why do we suddenly only get to see your wheel going around, when we need to see the display? Very weird.
do you know anything about the Zugo Rhino's
Do you know if running a 36v battery and 36v rated controller on a 48v hub is legit? Like, will I ever run into any type of issues?
I made mine go faster but my speed doesn’t go up. Anyone know how to reset a ebike
It's sad my 1200w kit can't go but about 30mph. And my last 1000w kit was able to hit 45.5mph, or the max speed it would give before it would immediately cut the power from the bike. Unless I was giving it a 52v 17.5ah battery hence why it was so powerful. It was pulling 1800w at the most. This new 1200w kit is okay..but I wish I could get it back up to 45mph at the most so I could get around places easily. Speedhacking these aren't easy.
It also depends on what controller you have. I have an off-road e-scooter with 1500 watts, whose cables are 4 times thicker than those of these 1500 watt bike controllers.
The battery (4x12v agm) from the scooter has a 60 ampere fuse built in, from which you can call up 40-50 amps as continuous output. These ebike controllers, however, only have a continuous output of 17 - 18 amps and briefly go up to 35 or so high.
I can do about 30 mph with my 1500w kit and the acceleration is poor until I reach 9 - 13 mph, only then does it start accelerating faster.
At first I thought the dealer had ripped me off and sent me a motor with less watts, but according to the display the consumption is actually 1300-1400 watts.
Hello how to turn on the display light on an electric bike ? My my bicycle display does not have brightness turned on. especially at night it's very hard without a bright screen
Hold up arrow
@@aski1529 okay thank you I will try
Hi mr.why my ebike display go off after same second , help me please?
Hello everyone,
I changed the settings and the bike doesn't work anymore
Someone knows how to Reset the settings to return to factory settings ?
My Bicycle Model RKS RS3 PRO X
With the sw900 is there a way to get the full range of the throttle without having to change the PAS ?
guys i am having a trouble with my handmade e bike, when i try to ride my bike it doesn't work, i see everything on my lcd can someone help me pls
Nope!
I have enabled cruise control but what do I press while riding?
Hold the down button for a few seconds
Thanks very helpful
Thanks man.!
Hi there, would you you know something about GOGOBEST GF700 settings? Best regards
Hi, very helpful video, learnt a lot from it.
1 issue I have is, I bought the new ebike motor where the controller is built into the motor, it is a 48v 1500w
I had to increase torque via increasing amps.
I had a 48v 1500w motor before my current, it died on me unfortunately. But the power from the old one was a lot more better than my current one.
I noticed my current motor is only displaying a maximum output wattage of around 800, whereas my old one, would at times, display over 1600 watts.
Is there any way where I can unlock more wattage output for my current motor?
Thanks
Vince Livingfree do you now know how to?
increase your p014 setting. if your being limited to 12 amps at 48v thats only 600watts.
My bike does not enter into the programming mode when I hold the 2 buttons. Is there another way I can increase the speed limit? (My bike is an EVox kab 375)
Hi man
Do you have some instruction about s900 ?
What if u got no manual!?!?!
I got a 555 blinking why
Where did you find this manual?
Online
If our kit has no paddle assist with it or has a single mode paddle assist can we modify it to PAS with modes? please if any video available there regarding the same. Thank you
I changed the top speed limit to max, but when I reach 25km the bike still limits the speed. It feels different, like if the bike is braking. Is there any solution to this? I have the kt-lcd3
Using the up arrow key, set the PAS to the highest number. I believe that should help. Let me know
@@AugustineEBikes you mean while biking? Yeah, the ASSIST value is set to 5 while reaching the 25km/h and the brakes hit. Even The brakes icon flashes when this happens, as if there is another system or configuration to change. To test this issue, I changed the Wheel Diameter to 6’’ instead of 29’’ in order to “fool” the device and reading a slower speed, but when reaching around “real” 25km/h it still slows down (the displays shows a much slower speed like 5km/h when this happens but its definitely running at around 25km). Could there be another system that tracks the speed and deactivates the motor?
Another thing that I found after changing the Wheel Diameter is that the throttle function won’t stops at 6km/h as it used to, but now it holds up to 25km/h before shutting down (while again the display shows a lower speed reading). So, the change in the Wheel Diameter indeed changed something but not the overall top speed. Thanks in advance
Isn't it that magnet sensor, in the rear wheel? You can fool that by putting the magnet on your pedal and changing the place of the sensor. It will detect a way lower "speed" and give you more juice. I think there are video's about this.
That is... "IF" it has a magnet sensor.
great vid mate not having a go at you
i got rid of this display i will be honest its shit
Guys does anyone know how to reset password I'm entering the correct password but it's not unlocking
The problem is a lot of these bikes don't come with manuals....which is dumb...but expected because China is the KING of doing things half assed. My display has 17 P settings.....Like how the hell am I supposed know what to do? It will be one long ass hell trial and error. made in China is made half assidly.
Agreed. Where is the video to help If you don't have the manual? I mean if you have the manual you don't need this video in the first place. Duh
trouble with S866 controller - when I press my + - buttons I do not get the P programmes - I only get 4 dashes at bottom of screen - you can scroll through and change to some letters and 0-9 numbers - no idea what to do ! can anyone help
Try entering the numbers 3745 and it should let you through. I had the same problem, hope this helps.
@@colevisuals111 thanks for your help - company eventually got back to me and gave me a different password 6666 - hope this helps anyone else out there
How to stop the mileage from resetting after a short break
Unfortunately will lose your trip distance every time you turn the battery off, however it does not effect the odometer. So in order to keep track of your trip distance remember where your odometers mileage was when you started.
Check the manual: what if you don't have the manual? That's why I'm here. No help
Why dint no one telll me 😢 but thanks bro
Heya the roadhog ebike MX253686 is asking for a 4 digit code when i turn it on any idea i done the 1111 2222 all the way to 9 and 1234
Lol im from morocco no limit of speed for bikes and i buy a electic bike for risque so i ll put the max speed lol
1:50
Taking advice from someone who never took a trigonometry class. Its "sign" wave not "seen"
Hey Einstein ... before you go insulting someone who just took the time to create a Free Video full of information for you...
maybe you should know what the F you are talking about !
*IT'S SINE WAVE !*
Eco trike
i did get accessed to the settings and adjusted the speed on P8 to 70 khp, i tested it out but speed still the same, is there another step i missed?
there is no P8. P1-5