Hi. I have setup the magnetic limit stopper between the sensor as instructed in the manual. I then completed the run time setup exactly like the video and the installation manual. During the run time setup and profiling the gate stops before it is completely closed (about 6cm before its closed). Once run time setup is completely and i test with the remote. The gate then not only closes completely shut but knocks the closed stopper. I then can't open the manual override. How do I fix this?
Cuando estoy programando el recorrido no puedo detener el portón con el botón set y por ende no me aparece el ajuste fino , así que no puedo grabar recorrido , porque?
Twnfo drive 1000 cuando la energia se corta y vuelve sale error y los controles no funcionan pero cuando desconecto la energia y la bateria por un par de segundo vuelve a funcionar los controles que puede ser ??
Please check your rack to pinion spacing, check for any physical obstructions. Encoder stall E01 is a loss of revolution count. Can you confirm if Positive closed mode activated. Can be referred to "How do I have gate close Fully" on this channel. If you do not manage to solve the matter, kindly visit our website (www.niceforyou.com/za) to send our technical team an e-mail for extra support.
At the 1.31 mark is she saying “pull the gate to the middle travel by hand” is that correct?
What if when finish this process the gate stop
Hi. I have setup the magnetic limit stopper between the sensor as instructed in the manual. I then completed the run time setup exactly like the video and the installation manual. During the run time setup and profiling the gate stops before it is completely closed (about 6cm before its closed). Once run time setup is completely and i test with the remote. The gate then not only closes completely shut but knocks the closed stopper. I then can't open the manual override.
How do I fix this?
Please send us your contact details to sales@et.co.za
What if when you finish the gate stop
Please help, I need to add 2 remotes to this model 500 600 system
What could be the possible problem if it requests motor limit setting?
How do you set your run-time if it displays "manual released" when you select the run-time option?
Cuando estoy programando el recorrido no puedo detener el portón con el botón set y por ende no me aparece el ajuste fino , así que no puedo grabar recorrido , porque?
Hi,how do i solve comms error on ET Drive 500 motor
Please help, I have the same system. I struggle to understand how to add 2 remotes to the system
Jason Henderson Hello Jason - we have a video tutorial loaded on our channel that can help you with this.
@@geraldkirsten2367 Thank you Gerald, still sitting with the same remote xD I will have a look in your channel tomorrow
Twnfo drive 1000 cuando la energia se corta y vuelve sale error y los controles no funcionan pero cuando desconecto la energia y la bateria por un par de segundo vuelve a funcionar los controles que puede ser ??
500
600
How to set up error code encoder stall e01
How to fix error code E01
What must i do if it says encoderstalle01?
Please check your rack to pinion spacing, check for any physical obstructions. Encoder stall E01 is a loss of revolution count. Can you confirm if Positive closed mode activated. Can be referred to "How do I have gate close Fully" on this channel. If you do not manage to solve the matter, kindly visit our website (www.niceforyou.com/za) to send our technical team an e-mail for extra support.
@@nicegroupsouthafrica8683 im still not winning but everything is clear and the positive closing is on 5
@@boykienkosi7190 Please call your closest ET Nice branch and speak to the technical team.
@@nicegroupsouthafrica8683 any contacts for South Africa Mpumalanga province Nelspruit
Hi. Did you get this error to clear on ur motor??
Queria restrições em português ou Brasil
😅😅😅😅😅😅😅😅😅😅😅😅😅😅😊😅😅😊😅
500
500
Drive 500