4K ✅ Engine Rebuild JD PowerTECH 4.5L 🔥John Deere Engine Overhaul 🔥NEW: Cylinders, Pistons, Gasket 🔥
ฝัง
- เผยแพร่เมื่อ 4 ก.พ. 2021
- 🛠️ Engine Repair Fixit John Deere Telescopic Loader Engine 100HP @BGFarmerJD
🔥 Do not forget to 🔥 SUBSCRIBE 🔥 to the channel !!!
Coming Soon Full video
4K ✅Engine Rebuild JD PowerTECH 4.5L 🔥John Deere 3420 Engine Overhaul 🔥NEW: Cylinders, Pistons, Gasket 🔥Bulgaria, Kubrat
We repaired the engine of the Telescopic Fadroma alone.
Problem: It raised the antifreeze to a very high temperature above 120 degrees Celsius. And it was putting pressure in the Antifreeze Expansion Vessel. There was no problem with starting the engine or running it. After we removed the head and found that the head gasket was burned. It was putting pressure from the Cylinders in the Cooling System. The head didn't need grinding. Only the valves and the valve beds were fitted with a special fitting device. Then we took it out to check the cylinders and found that they were worn out, so we replaced a whole set. Pistons, Shirts, Gaskets and Gaskets. We have bought English brand Analog in high quality as the original parts of the brand ANGLO Agriparts ENGLAND. It cost us about BGN 1,500 ~ EURO 750
I hope you enjoyed the video, if you subscribe to the channel I will be happy. If you have questions about the repair of the engine Write in the Comments or if something is not clear in the video. I hope I was helpful with this short video. Expect more similar repairs in the Channel.
Devices used to capture video are:
1 - Apple iPhone 11 Pro 256GB
2 - DJI Phantom 3
3 - GoPro Hero 4
4 - Apple iMac 27" 5K
Video Editing: Final Cut Pro X
Music: No Cpyright Music
|--------------------------------------------------------------------------------------------------------------|
►Like,
► Comment,
► Share,
🔥 SUBSCRIBE 🔥 for Channel: BGFarmerJD
/ @bgfarmerjd
Social Media:
►I N S T A G R A M - / bgfarmerjd
►F A C E B O O K - / bgfarmerjd
►T W I T T E R - / bgfarmerjd
|--------------------------------------------------------------------------------------------------------------| - ยานยนต์และพาหนะ
I might be buying one of these engines to put in a Skid Steer. Nice to see it all apart. Looks like it's easy to work on. Supposed to be a very good engine according to what I've read about it.
Explained at a technical level 🤙👊 a question friend, I did the reconstruction to one of the same with its complete packing liner kit and work on the cylinder head (replacement of guide valves and rubbers) plus a new turbo compressor, but the engine was leaking oil from the exhaust manifold more smoke what could it be??
unbedingt den zylinderkopf planen da immer am feuerring der kopfdichtung eingearbeitet! sonst hält die kopfdichtung keine 1000 stunden!auf den videos sieht man sehr schön dass die planfläche schlecht ist.
May the peace, mercy, and blessings of God be upon you. Is it possible to tighten the engine head bolts, the crankshaft bolts, and the arm bolts? How much is the tensioning force of the John Deere 405L engine? Thank you
10:41 Good way to break a ring.
O meu amigo se tu puder nos mostrar a camisa com os aneis de borracha pous tem varias cores qual a sequencia de colocaçao 👍se puder agradeço pois tenho um 5700 pra montar.
Nice video
#santoshpal
👍
Cara pasang piston gimana posisi nya gimana mau tau terbalik atau tidak
Quiero saber la altura del block y la camisa de un motor powertec de 6 cilindros
Necesito saber sobre el cindrode la tapa hidraulica
Quién me podrá dar el torque de vielas de un 4430
What kind of Coolant are they using in the engine
La altura de la camiza y blok
Muy buen
Quero ber cono se colocan las camizas
Como
Assembling karaoke generator
Wow, to go through all that time and expense and then lap the valves? Lapping valves is never a good idea- valves and seats need to be refaced properly with the proper angles which are usually 1 degree different from each other.
I don't see what's wrong with valve lapping
sinmiedo
Never trust anyone wearing sandals to rebuild an engine. This is wrong in so many ways.
🤣🤣
Hillbilly rebuilder