I have lost count of how many 4010 and 4020’s that I rebuilt in the late 60’s and early 70’s.. I worked for a John Deere dealership in the UK and loved working on the Deere’s. Lovely tractors. Watching this video has brought back some great memories.
@@bradjenkins932 I guess all marques have their problems. I also worked on Massey Ferguson’s, New Holland, Ford, International Harvester and unfortunately the Russian and Polish Zetor and Ursus. These two were built to last as you can imagine but boy were they unreliable. .
“Whoops” - what a great comeback…. lol. “I just lifted a tractor” - very impressive lifting technique. Ethan is a great mechanic, he could make a good living as one. But I’m glad he’s staying on the farm because America needs farmers! This video was edited perfectly, kudos to the camera crew….
I've been doing that type of work around my county for a 35 years and couple observations when you're doing this kind of work it seems like 75% of it is cleaning. The other other notable thing is when you first started up you realize you did a lot of things are right that are not seen by most, which means there's a lot of things that can be wrong. Thumbs up.
Master mechanics at work...good job guys and you too Rhonda...you managed to coax a few words out of em...my experiences around a shortline rr locomotive shop (as here...merely observing)were that when heavy intensive work was ongoing...very little was said....except on occasion when clanging of metal unexpectedly occurred...an expletive or two...and then sometimes a "redo" of long hours of work would be redone...all part of the fun!
Pretty cool watching your boy being so meticulous. What a great skill he possesses! I grew up on a 100 head dairy farm in north west NJ till I was 15 and boy do I miss it, especially working with family and friends. Thanks for the videos.
Dad has done a great job in teaching the boys! It must make you both proud! There all something to be proud of and you as parents ❤ have taken the time and the Love and the Grace of God have created this wonderful family 👪 I do believe there's something extra special about all farmers. They very dedicated and God fearing people 🙏 I don't know what we would do without You! There are so many things that you have to deal with on a daily basis. I personally appreciate everything you go through to get your products to us, we don't thank you and appreciate you enough!!! So once again thank you and thank all farmers. God Bless and my prayers go out to you all!!!! Love Ya!
@@brendabaxter4045 Ty.... but at 75, I know I make a lot of mistakes, but Rhonda gets the message in what I'm trying to convey! That's what counts! Have a SUPER day!
Gr8 4010 video !!!!!! I have two 4010,s an have served me well an both are still working in hay an winter feeding .Great to see these older models of JD still putting in a day’s work. You all did great bringing the 4010 back to working condition . Really appreciate your hard work an skills .Good camera work as well !!!
Im a machinist and I have few recommendations. I hope you replaced the rod that had the spun the bearing and also you should have all the rods resized at a machine shop. They would grind off a little off the rod and cap where the cap fits on the rod and then open the bore to the proper size. This would help to keep the bearings from spinning again. They would also install a new bushing in the small end and open it up to proper size.
Always such a treat when you show Kevin and the boys, successfully repair a tractor, truck, piece of equipment, I enjoy watching Sydney working so carefully, such a knowledgeable family, thanks for sharing this
Nice to see the guy’s working together. Not a surprise to see the mechanical they have, without those skills it would almost be impossible to start farming. Kudos to the whole family including MacKenzie.
Quick tip.... Take you 2 bolts the same size as the bell housing bolts, cut the heads off of them and thread them into the block. Then when you are trying to line up the block with the bell housing it will slide on with ease.....
I find these jobs rewarding. One thing I did with the head gasket on my 4020 was put a high heat, high pressure sealent around the oil port on the back right corner because they are notorious for leaking oil.
Good job 👍 Don’t put lube on the back side of the bearings. You want the back side clean and dry. Safety glasses when cleaning. That’s a mom thing you need to remind him.😉
True that, no lube on back of bearings. It can give you a false reading on plastiguage and make it easier to spin a bearings. Looks like you did a great job cleaning it up.
Acres of Clay Repair & Service, Inc. featuring Kevin and his two sons Sydney & Ethan. This how to: episode is brought to you by: The TH-cam Channel. Thanks for watching! Another successful outcome on display here as we watch the trio get down to business. Awesome job guys! Have a great week!
Great job Ethan at somebody that used to rebuild a lot of engines back in the seventies eighties and nineties you did a great job I like your detail how you do it you do a great job and would make somebody a great mechanic but I'm glad you're staying on the farm and I'm glad you up your neighbor's thank you very much great video as always God bless the whole family stay safe
Nice job on this one guys! Those 4010s can be little bit of a bear to work on. Between all those lines that run across the top of the engine splitting the tractor is kind of a pain. Then there’s the 24 V system… It starts on 24 V but everything else is 12 so that can be a little tricky. Then it has that synchro range transmission where the linkage gets a little worn out and it’s hard to shift.. then there’s the steering when it gets air in it and the front wheels don’t line up with the steering motor and you have to bleed it out lol. They are really cool tractors though. Nice job men
Just awesome! As this was my first video, I'm not sure of your son's age. But I will tell you this, he puts to shame most of my friends boys hands down. Great job young man! Reminds me of the days before the internet, cell phones and video games. We all worked with our hands and our minds. A simpler time but to me, a better time.
That was great. It takes time but the reward is when it starts and runs. I have a 3010 that needs similar work. Always love these tractor repair videos.
Looks like that tractor is again ready and plenty able to go to the field. If we could somehow just get a re~paint we could get that tractor in the field with a smile on it’s face. Good job guy’s, and know the owner will be happy.
Good job! I find slings around the engine, attached to a properly sized chain fall and again to the front loader forks provides for a more accurate "landing". Forks up high and minor adjustments with the falls. Very pretty girl.
You are going well. a friendly reminder, it's good practice when installing gudgeon pin circlips into groove to turn the circlips in the groove during installment, it's like a guarantee for yourself knowing circlips are seated correctly.. cheers and good work 👍
Can't keep a Deere down 😅 . After your boy has lived a little longer he'll be more appreciative of all the things Mom does and did for him, keep the faith 🙏 🤪🇺🇸
I have been watching your videos for a couple months now and this is my favorite so far. Family working on various projects in a shop that isn't immaculate with basic tools and still doing high quality work.
Big project. I noticed he oiled the back side of a bearing. I only do gas engines but I don't think you want to do that. Normally only oil the surface going to the crank
I know you've probably rebuild engines before but I've taken 4010 Motors and put in a Reliance kit with a new camshaft and got a hundred 10 horsepower out of them I would also put in a new oil pump drive here and replace the rod bushings
Nice job by all. Great work Ethan, Master Engine Rebuilder. At the start thought it was Kevin. They sound alike. Thanks for doing the video Ronda. Wonderful film making as always!
Great job!!! It's Alive!!! I thought I was watching a golfing channel at times with the whispering. (Ha!Ha!) I did like Ethan's "Whoops" around the 5:26 mark!!!
Great job I'm sure the neighbor is glad. Great job Ethan plus all the family support. plz wear protective eye wear with the grinder usage you only have one set of eyes.
I have lost count of how many 4010 and 4020’s that I rebuilt in the late 60’s and early 70’s.. I worked for a John Deere dealership in the UK and loved working on the Deere’s. Lovely tractors. Watching this video has brought back some great memories.
Yeah you can get pretty good at working on JD.
@@bradjenkins932 I guess all marques have their problems. I also worked on Massey Ferguson’s, New Holland, Ford, International Harvester and unfortunately the Russian and Polish Zetor and Ursus. These two were built to last as you can imagine but boy were they unreliable. .
Should have bought an 806 or 856 and the engines would have run 10,000 or 15,000 hours!
@@countrygent4 We have 1066s that have 20K+ hrs. O'haul them around 5-6K hrs. Great old tractors.
“Whoops” - what a great comeback…. lol. “I just lifted a tractor” - very impressive lifting technique. Ethan is a great mechanic, he could make a good living as one. But I’m glad he’s staying on the farm because America needs farmers! This video was edited perfectly, kudos to the camera crew….
I've been doing that type of work around my county for a 35 years and couple observations when you're doing this kind of work it seems like 75% of it is cleaning. The other other notable thing is when you first started up you realize you did a lot of things are right that are not seen by most, which means there's a lot of things that can be wrong. Thumbs up.
Master mechanics at work...good job guys and you too Rhonda...you managed to coax a few words out of em...my experiences around a shortline rr locomotive shop (as here...merely observing)were that when heavy intensive work was ongoing...very little was said....except on occasion when clanging of metal unexpectedly occurred...an expletive or two...and then sometimes a "redo" of long hours of work would be redone...all part of the fun!
Awesome job. Nothing like getting your hands dirty and bringing something old back to life
Pretty cool watching your boy being so meticulous. What a great skill he possesses! I grew up on a 100 head dairy farm in north west NJ till I was 15 and boy do I miss it, especially working with family and friends. Thanks for the videos.
Dad has done a great job in teaching the boys! It must make you both proud! There all something to be proud of and you as parents ❤ have taken the time and the Love and the Grace of God have created this wonderful family 👪 I do believe there's something extra special about all farmers. They very dedicated and God fearing people 🙏 I don't know what we would do without You! There are so many things that you have to deal with on a daily basis. I personally appreciate everything you go through to get your products to us, we don't thank you and appreciate you enough!!! So once again thank you and thank all farmers. God Bless and my prayers go out to you all!!!! Love Ya!
Thank you for your very kind words!!
@@acresofclayhomestead You're Supper People! God Loves You! Stay safe 🙏 ❤
@@rodmcintire7319 Super, not supper!
@@brendabaxter4045 Ty.... but at 75, I know I make a lot of mistakes, but Rhonda gets the message in what I'm trying to convey! That's what counts! Have a SUPER day!
Good seeing your boys tackle those projects. Nothing like knowing how to use your hands and brain! Compliment them all for me!
Wow, so great to see that our young farm kids of today have such skills!
Gr8 4010 video !!!!!! I have two
4010,s an have served me well an both are still working in hay an winter feeding .Great to see these older models of JD still putting in a day’s work.
You all did great bringing the 4010 back to working condition . Really appreciate your hard work an skills .Good camera work as well !!!
Thanks for your kind words!!
Great old tractor...4010, 3020 and 4040 are some of my favorites.
You can’t leave out the 4020
Im a machinist and I have few recommendations. I hope you replaced the rod that had the spun the bearing and also you should have all the rods resized at a machine shop. They would grind off a little off the rod and cap where the cap fits on the rod and then open the bore to the proper size. This would help to keep the bearings from spinning again. They would also install a new bushing in the small end and open it up to proper size.
And never use a 3M pad to clean gasket off it will make surface uneven
Could watch this all day. So young to be so mechanicly inclined.
Always such a treat when you show Kevin and the boys, successfully repair a tractor, truck, piece of equipment, I enjoy watching Sydney working so carefully, such a knowledgeable family, thanks for sharing this
Nice to see the guy’s working together. Not a surprise to see the mechanical they have, without those skills it would almost be impossible to start farming. Kudos to the whole family including MacKenzie.
Quick tip.... Take you 2 bolts the same size as the bell housing bolts, cut the heads off of them and thread them into the block. Then when you are trying to line up the block with the bell housing it will slide on with ease.....
I find these jobs rewarding. One thing I did with the head gasket on my 4020 was put a high heat, high pressure sealent around the oil port on the back right corner because they are notorious for leaking oil.
Good feeling to get it started with everything working and no leaks. Good going.
Good job 👍
Don’t put lube on the back side of the bearings. You want the back side clean and dry. Safety glasses when cleaning. That’s a mom thing you need to remind him.😉
Mom wasn't there when he was cleaning, if I had been, I would have definitely said something. 🥴
True that, no lube on back of bearings. It can give you a false reading on plastiguage and make it easier to spin a bearings. Looks like you did a great job cleaning it up.
And don’t Touch the bags with your bare hands The acid and oil off your skin. Do bad things to bangs of all kinds
Young Lad has nice way , good hands knows how to work , not yelling and great to see not firing tools down. Bright Man.
Like his mothers people
Acres of Clay Repair & Service, Inc. featuring Kevin and his two sons Sydney & Ethan. This how to: episode is brought to you by: The TH-cam Channel. Thanks for watching! Another successful outcome on display here as we watch the trio get down to business. Awesome job guys! Have a great week!
Ethan is a Man of few words but he is one heck of a Great Mechanic. What a Great Job he did. 👍
One of my favorite video's yet. Rhonda your son looks just like you.
Thanks for watching!!
I agree
Great job Ethan at somebody that used to rebuild a lot of engines back in the seventies eighties and nineties you did a great job I like your detail how you do it you do a great job and would make somebody a great mechanic but I'm glad you're staying on the farm and I'm glad you up your neighbor's thank you very much great video as always God bless the whole family stay safe
Thank you for your kind words!!
2:48 Did we just see Dad outlift two sons? Way to go!
Nice to have that factory book, I'm a firm believer in specs.
Great work! I love seeing and hearing these ol gals receive new life for another generation of farming.
Only lube the crank side of a bearing, never the under side of a bearing!
It's good to lube both sides..
The bearing will spin easier.... Lmao
Nice job on this one guys! Those 4010s can be little bit of a bear to work on. Between all those lines that run across the top of the engine splitting the tractor is kind of a pain. Then there’s the 24 V system… It starts on 24 V but everything else is 12 so that can be a little tricky. Then it has that synchro range transmission where the linkage gets a little worn out and it’s hard to shift.. then there’s the steering when it gets air in it and the front wheels don’t line up with the steering motor and you have to bleed it out lol. They are really cool tractors though. Nice job men
Could watch these gentlemen fix equipment all day. Another great vid.
You and Kevin sure raised up a bunch of good kids. Nice to see the owner fix the tractor rather than junking it.
Just awesome! As this was my first video, I'm not sure of your son's age. But I will tell you this, he puts to shame most of my friends boys hands down. Great job young man! Reminds me of the days before the internet, cell phones and video games. We all worked with our hands and our minds. A simpler time but to me, a better time.
Welcome to my channel!!
I really enjoyed this video. Your video skills are on point. You showed the many talents of your men. Kevin is a good coach. Thank you.
That was great. It takes time but the reward is when it starts and runs. I have a 3010 that needs similar work. Always love these tractor repair videos.
Fascinating to watch. I studied heavy duty diesel mechanics and had an opportunity to operate a 3010 for a couple summers.
great job hope the neighbor was pleased and gave you all a nice check
Ethan did a great job. Love his sense of humor 😊
Very interesting video thanks for your time to do the video on 4010 John Deere tractor
Thank you for watching!!
Well done guys, as a farmer it’s very impressive to see you tackle these jobs that I wouldn’t have the courage too 👍
Nothing like old iron revived. Well done. 👍all involved.
Молодцы. Семейный подряд в действии. Отличный трактор
Looks like that tractor is again ready and plenty able to go to the field. If we could somehow just get a re~paint we could get that tractor in the field with a smile on it’s face. Good job guy’s, and know the owner will be happy.
I can build you a multi story building but cannot do what your boys have achieved. Well done to them.
saved a farmer lots of extra money on a repurchase. Good job guys !
Great job Ethan and crew! And good camera work Rhonda!
Great video kevin and the boys great job over haul the tractor great camera lady keep them coming learning alot
What with all the work your men have to do on your own place, I'm amazed that they have the time for someone else's machinery. They do good work.
They work on the side jobs when they have "free time".
They are great mechanics with nhis cap on Eathan looks just like you Rhonda Good job guys....
Glad they understand diesel mechanics. Congratulations to them. I've already done this work on the truck too.
Great video. Great job. Amazing family. God has blessed with many many talents. Thanks for every post.
Hello ! Really good video 😎🙂👍thanks.
You all made my day! Thanks for sharing your lives with us.
Thanks for watching!
Nothing Finer than the Sweet Sound of Success. Keep up the Strong 💪 Effort, ALL. You Rock! 👍
Good job! I find slings around the engine, attached to a properly sized chain fall and again to the front loader forks provides for a more accurate "landing". Forks up high and minor adjustments with the falls. Very pretty girl.
You are going well. a friendly reminder, it's good practice when installing gudgeon pin circlips into groove to turn the circlips in the groove during installment,
it's like a guarantee for yourself knowing circlips are seated correctly.. cheers and good work 👍
This engine has low oil pressure. The most important thing is that the pressure on the hot oil does not drop at work. Good work👍
Good job everybody. Y'all take care and have a blessed day and I'll see you on your next vidja.
Great video, love to see the guys working on tractor motors.
Good job, sounds good, smells good. The smile on Kevin's face says it all. Time for dinner.
I’m glad to know I wasn’t the only one screaming that lol
Can't keep a Deere down 😅 . After your boy has lived a little longer he'll be more appreciative of all the things Mom does and did for him, keep the faith 🙏 🤪🇺🇸
I have been watching your videos for a couple months now and this is my favorite so far. Family working on various projects in a shop that isn't immaculate with basic tools and still doing high quality work.
Thanks for watching!
Came for the thumbnail, stayed for the repair : )
These guys and Gal are smart!
Nicely done 👍
She was a "SAVER" ... Under Very PRECISE Hands!😊.... I'm a "Farmall" guy.. but have a soft ❤ for the 70's Deer's
better put up a shop for ethan smart guy
This bring back memories, 40 years ago I was driving one of those .. great work guys..:)
Big project. I noticed he oiled the back side of a bearing. I only do gas engines but I don't think you want to do that. Normally only oil the surface going to the crank
The motor sounds good ! Great job guys.
Thanks for the great fun guys
I know you've probably rebuild engines before but I've taken 4010 Motors and put in a Reliance kit with a new camshaft and got a hundred 10 horsepower out of them I would also put in a new oil pump drive here and replace the rod bushings
if your going that deep replace al the bearings bushings including camshaft
@@michaelwillcutt2619 oh yeah that's just part of the camshaft never replace a cam without replacing the bushings or the bearings
Great job guys putting the engine in the tractor
Great job keeping those guys in line Rhonda
One of the most gorgeous shop superintendents on TH-cam. Bet she runs that shop with an iron hand.
Great video Rhonda and Kevin
Nice work sure that farmer will be very happy
Nice job by all. Great work Ethan, Master Engine Rebuilder. At the start thought it was Kevin. They sound alike. Thanks for doing the video Ronda. Wonderful film making as always!
Great to see the knowledge, and a farm family working together, thank you for the great video.
Well done. Runs like a top!! Take care & stay safe. Cheers
You guys are amazing. It has always fascinated me how people know how to do that stuff. Great video. Your kids are amazing!!
Nice work 👏 successful rebuild smooth at silk 👌 👏 👍
not bad for 50 year old tractor!!!
Another job well done!
Love it great job. God bless your beautiful family 👉👍👍👍👍⚘⚘⚘
That is amazing seeing him repair that engine.
Nice job guys! Sometimes a gantry crane would be nice to have, but when it's not being used it's in the way!
Thanks for sharieng a geat video! Love that older John Deere. Love from Sweden. ✨💖🤠
Me and my dad love watching your program keep up the good work
Thank you so much for watching!!
Old style torque wrenches and plastigage. Been there done that. Keep on keeping on.
Good job guys it fired right up!
You finally got a John Deere on your property amazing Pretty in Pink Randa!
You guys are so multi talented
Great job!!! It's Alive!!! I thought I was watching a golfing channel at times with the whispering. (Ha!Ha!) I did like Ethan's "Whoops" around the 5:26 mark!!!
Not that the boys should leave the farm but the mine here in Nevada would pay big money for their skill. Proud parents you must be!
Awesome job young man. Carl
Great rebuild Ethan. Sounds great. I think sanders is almost the same size as the brothers. Growing fast
Yes, he is growing fast!! 😳
Yet another successful repair, sounds sweet! :)
This is south Korea thanks you good video i hope always happyiness family^^♥
John from Edmonton Alberta Canada! If it works it will be Magic!
Great job I'm sure the neighbor is glad. Great job Ethan plus all the family support. plz wear protective eye wear with the grinder usage you only have one set of eyes.
Nice work guys I'm happy you saved it from part out.