RPG do an awesome mesh grill, but he loves his ebay cheap stuff, he does wonders making it look good I’ll give him that. Mesh would have been something a bit more rally heritage.
White Calipers are a nice touch! Stickers add a unique touch to them as well. Hella good job dude! We're almost there with this build. Loved every minute of every one of these vids. can't get enough. Please keep doing these forever. LOL
The minute Devin said “Because all the break dust” I knew it right there and then he was going all white. They look sick bro that car it’s coming alone so freaking nice. It’s 🔥
The best thing to use is red rubber grease for caliper re-assembly, I think that is what came with my caliper re-assembly kit. Or silicone grease as it is rubber safe. Any oil based grease will cause the rubber seals to swell and break apart over time. The car is looking mint btw, the white caliper colour looks sick, I can’t believe how far the car has come along, from a smoking ugly duckling to a beautiful shiny black hawk 😆.
You gotta check out the bottle method for bleeding brakes. It’s a really simple setup and can be done by yourself in about the same amount of time it takes two people and it’s harder to mess up
Looks amazing! I was about to do the brake calipers on my WRB STI Hatch in White. Definitely gonna do Polar White now. I need to get me some blue Brembo stickers too!
@@Anfurnyy The glossy tire shines are gross, but there are some nice matte/low gloss ones that make the tire look like a fresh set of rubber. It just brings back the dark colour instead of the ashy gray
Some questions i would like to get answered 1. Do the windows need to get polished before tinting? 2. If you dont wipe the excess ceramic will you still have the ceramic effect? 3. Is clay barring essential before polishing? 4. Is there any super easy fix if you damaged the paint and want to make it look new again?
#1 no you dont need to polish them you just need to clean and alcohol them. #2 yes it still will have the same effect it just wont feel as smooth or look flat. #3 yes it is essential before polishing because there will be tar and other junk that's stuck and imbeded in your paint that only a clay bar will remove. #4 if there is deep scratches you can wet sand to a limit but if the scratch is past the clear coat then there is nothing you can do about it without re painting the panel
You had the idea of bleeding the brakes from the farthest away from the master cylinder to the closest correct (witch would be the passenger side rear btw) but then it looks like you started on the driverside front?
You cant bleed the brakes in the way you did. If the master cilinder is on the left side you have to go in this pattern. Rear right, rear left, front right, front left.
You can, you're just more likely to leave air in the system. He described it properly but then said he was gonna bleed the driver rear first, maybe it was just a brain fart
White calipers look sick. Will be interesting to see how they last with the brake dust. Iv had alot of parts for the underside of my car powdered white.
For your c-lights: not sure if it's different for the STI, but for mine I had to disconnect the drl module and put my parking lights on to drive with just the c-lights. The drl module would only turn on my low-beam projector. Is that what you did or were you able to wire it up so that the c-light is your drl? If the latter, do you mind sharing what you did? I've gotten lost in the wiring diagram many times haha
Engine assembly lube on rubber brake parts? I thought that was a no no. Petroleum swells rubber brake seals. I know this is a older video but curious to see if the brakes are okay after all this time.
The wheels alone don't look too good, but you put them on the car they look sick, the calipers alone don't look too good, but you put them on the car along with the wheels and everything looks so sick! That's amazing.
Great job You did a lot of work and it paid off did it all your self just like the evo ! You do little things that make the cars look completely different.l and run and look good. 👍
I was dubious about the brake colour change, but it turned out great, congrats well done, looks sick.🤘 ps hope your bro is doing well, he’s been very quite on his channel for awhile now, let him know we miss him and his bike vids.
I'm hoping you'll do a SEMA car or truck project some day soon. Some smart company needs to invite you to show a project of yours at SEMA. I hope it happens you deserve it. I hope a good company sees this and makes it happen.
So I got a subaru legacy 08 and put new catalytic converter on and there is a rattling and I cant find it any ideas anyone? Only when I get on the throttle
What I still don't get is why you always strip of the zinc plating of the screws? I would rather avoid this, or in case the zinc coating is already somewhat worn of, get them re-zinc-coated. Last a lot better and longer then bare metall screws. Even with coated heads, that is not a good way to go in my opinion. Besides this, great job again! :-)
All it needs is the front grill
And a new wheel color
RPG do an awesome mesh grill, but he loves his ebay cheap stuff, he does wonders making it look good I’ll give him that. Mesh would have been something a bit more rally heritage.
Yaaaa
And the sti airbag this ones throwing me off
😂 I been waiting so loooong
White Calipers are a nice touch! Stickers add a unique touch to them as well. Hella good job dude! We're almost there with this build. Loved every minute of every one of these vids. can't get enough. Please keep doing these forever. LOL
The minute Devin said “Because all the break dust” I knew it right there and then he was going all white. They look sick bro that car it’s coming alone so freaking nice. It’s 🔥
It still blows my mind at how far this thing has come!
Devin has fallin in love with the budget build and yes it is FUEGO !! Love what it has become
didnt the tinter say not to open the windows for 2 days?
maybe is not filmed all in 1 day
The best thing to use is red rubber grease for caliper re-assembly, I think that is what came with my caliper re-assembly kit. Or silicone grease as it is rubber safe. Any oil based grease will cause the rubber seals to swell and break apart over time. The car is looking mint btw, the white caliper colour looks sick, I can’t believe how far the car has come along, from a smoking ugly duckling to a beautiful shiny black hawk 😆.
I wasn’t a fan of the blue wheels before, but the white calipers make them look like they fit the car now. Good work.
Those blue wheels and white calipers combo looks so sick!
When you finish can you do a break down of how much did it cost to get it back to 💯
Have to say I'm going old school devin
That guy who sold you that sti is kicking himself in the ass right now ! 😂
Ikr
I dont think so, this guy has put tons of times and money into this project its not like hes just get it the same as when he bought it.
Ben Kirkham lmao ikr that comment was so dumb this dude put in hella work to get it like that
The dude thought he owned a semi truck with the 12 quarts of oil he put in there😂
How much did he get the sti for ?
Blue wheels w white calipers is AN AWESOME combo Devin😎👌🏻.
Those wheels are absolutely sick Devin. I wish we could have things do so easily here in RSA. Now get that grille on...we waiting.
Very perfect colour for the brake calipers Devin
White calibers look great.. can u do a update video on how the coils are doing
You gotta check out the bottle method for bleeding brakes. It’s a really simple setup and can be done by yourself in about the same amount of time it takes two people and it’s harder to mess up
Love the color! I thought you paint them with some clearcoat too, but still an amazing shine! Amazing job!
Great color and stickers for the brembos! Really nice!
Glad you went ahead and did the JDM tail light mod, 04/05 tails just aren't right without it.
Looks amazing! I was about to do the brake calipers on my WRB STI Hatch in White. Definitely gonna do Polar White now. I need to get me some blue Brembo stickers too!
I personally love the white with those wheels. Nice choice dude!
I want you to do a full sound system plz
Best callipers you’ve done!! They look sick!! Wheels need to go white now 👌
I would love to see your car with a tyre shine. Just out of curiosity on how gorgeous it would look all super clean 😃
Tire shine is ugly. Lol
@@Anfurnyy The glossy tire shines are gross, but there are some nice matte/low gloss ones that make the tire look like a fresh set of rubber. It just brings back the dark colour instead of the ashy gray
Tire Wet! Dat's what YOU want! Makes your tires look wetter than a Lake!!!!
White works great behind those wheels!
with the HF powder coat gun you want to remove the tip. allows for better coverage
Old school definitly 👍
Nice choice with the calipers.
Some questions i would like to get answered
1. Do the windows need to get polished before tinting?
2. If you dont wipe the excess ceramic will you still have the ceramic effect?
3. Is clay barring essential before polishing?
4. Is there any super easy fix if you damaged the paint and want to make it look new again?
#1 no you dont need to polish them you just need to clean and alcohol them. #2 yes it still will have the same effect it just wont feel as smooth or look flat. #3 yes it is essential before polishing because there will be tar and other junk that's stuck and imbeded in your paint that only a clay bar will remove. #4 if there is deep scratches you can wet sand to a limit but if the scratch is past the clear coat then there is nothing you can do about it without re painting the panel
super sick!!! brake dust worries me though... 🤨 lot of maintenance will be needed
Wow! Great color choice
You had the idea of bleeding the brakes from the farthest away from the master cylinder to the closest correct (witch would be the passenger side rear btw) but then it looks like you started on the driverside front?
Calipers look good Devin, nice work. Hot like fuego!
Brakes came out great with that color combo nice job dude 👍
You cant bleed the brakes in the way you did. If the master cilinder is on the left side you have to go in this pattern. Rear right, rear left, front right, front left.
You can, you're just more likely to leave air in the system. He described it properly but then said he was gonna bleed the driver rear first, maybe it was just a brain fart
Car is looking Sick Bro love the blue wheels with white
White calipers look sick. Will be interesting to see how they last with the brake dust. Iv had alot of parts for the underside of my car powdered white.
I didn't think the white would work,was I wrong! Great look!
Whats up with the white spot on the right from fender 23:14?
For your c-lights: not sure if it's different for the STI, but for mine I had to disconnect the drl module and put my parking lights on to drive with just the c-lights. The drl module would only turn on my low-beam projector. Is that what you did or were you able to wire it up so that the c-light is your drl? If the latter, do you mind sharing what you did? I've gotten lost in the wiring diagram many times haha
Hello is that right you can make evo fast sheaper than making a Subaru
Subaru cost 3 times more
To get good results thank you
Engine assembly lube on rubber brake parts? I thought that was a no no. Petroleum swells rubber brake seals. I know this is a older video but curious to see if the brakes are okay after all this time.
Yo devin can you do a video, featuring all your cars and explaining everything about them? we'd love to see all your cars in one video
Just imagine this with bronze or grey wheels
Yeah the blue wheels look terrible
This car is goals! 🔥🔥 good stuff Devin, keep it going
The wheels alone don't look too good, but you put them on the car they look sick, the calipers alone don't look too good, but you put them on the car along with the wheels and everything looks so sick! That's amazing.
This man has exceeded my expectations for this car with those brakes i can fully accept those blue wheels
that color combo is really dope
Very nice, definitely Fuego 🔥🔥 brembo with vasyn logo 👌
Hawk eye looks awesome. Old school.
I want this one... what do you do after you’re done ?
Great job You did a lot of work and it paid off did it all your self just like the evo ! You do little things that make the cars look completely different.l and run and look good. 👍
The brembo stickers are way too much fuego for their own good 🔥
FUEGOOOO! even the vasyn in the STICKER like brooo, u can’t be the only fire youtuber in WA hah I needa get to your level w my car and channel 👌
I love the place he stay. Calm rural area...beutiful
That looks wayyyy better great job brotha!
damn the calipers in white look so clean! good choice.
That’s a clean clean sti dude a lot fuego there
Did you buy rebuild kits for these or use the same seals?
White looks great!!
That beauty Bro! Congrats! 🤙😊💖
Devin what do you torque the halves bolts to i want to do my brembos but cant find specs anywhere
I was dubious about the brake colour change, but it turned out great, congrats well done, looks sick.🤘
ps hope your bro is doing well, he’s been very quite on his channel for awhile now, let him know we miss him and his bike vids.
Polish the muffler and tire shine! 👌👌
The tint bro you rolled the windows down you werent supposed to yet 😂
gunmetal finish looks sick on those wheels✨
I'm hoping you'll do a SEMA car or truck project some day soon. Some smart company needs to invite you to show a project of yours at SEMA. I hope it happens you deserve it. I hope a good company sees this and makes it happen.
Those calipers are fire!
Hey man, tell me the brand of power tools you're using especially with the sockets in wheels! i dont know what to call that
I am feellin that brembo's with the sticker with your logo. A Devin Original again
Love the white man, was hoping for a long time you would choose white 🙌🏻👌🏻👌🏻
Old skool every day 🤟🏻🤟🏻🤟🏻
Maybe a white subaru or sti logo for the centercaps of the wheels?
Just awesome..... looking really reallllllly good !!
Where did you get the brembo stickers from?
What tint percentage do you have on the front windshield??
What percent do you put on the windshield! I am trying to get mine done like yours!
The white and the blue looks so sick
Since you put the tint on the windshield, doesn't that make the ceramic coat on windshield useless?🤔
i wished you did the STI pink color
looks good stil
Damn, I want to do this so bad on my Genesis. I am in Western Washington, wish I was closer would love to pay you to do them.
So I got a subaru legacy 08 and put new catalytic converter on and there is a rattling and I cant find it any ideas anyone? Only when I get on the throttle
Wont you change the exhaust?
what wing stabilizers are those?
Very fresh indeed
Car looks amazing. Calipers look good. Are you gonna paint the the rear fender wells?
Car is looking good and like the white calibers.
Love the white! 😎👍
Get some green stuff pads, they give off next to no dust
Old school 🔥🔥🔥
Please get blue STI badges to match the wheels and the interior
What I still don't get is why you always strip of the zinc plating of the screws? I would rather avoid this, or in case the zinc coating is already somewhat worn of, get them re-zinc-coated. Last a lot better and longer then bare metall screws. Even with coated heads, that is not a good way to go in my opinion. Besides this, great job again! :-)
Looks insane!! I called it boys 🔥
Clear tint would be nice
Subi's looking fire 💯👌🔥😎
You should just Cerakote next time super easy and when you want to change the color all you have to do is sandblast it.
Spreading the COVID, no social distancing... But pushing out that car content, youth 2020
what wheels are these if anyone knows. Thanks
old school is on point today
That looks so sick!