nested esxi hosts management configuration will not be saved or will be erased after restart?
ฝัง
- เผยแพร่เมื่อ 10 ต.ค. 2024
- VMware ESXi-8.0U1a-21813344-standard
I have solved the problem. After configuring the management settings, please refrain from restarting the ESXi server immediately. There appears to be a slight delay when it comes to saving the configuration. I completed the management setup and waited for 1 hour, and the IP addresses were successfully saved. Restarting the server no longer erases the setting
did you get the fix for this?
I have solved the problem. After configuring the management settings, please do not rush to restart the ESXi server immediately. There appears to be a slight delay in saving the configuration. I completed the management setup and waited for 1 hour, and the IP addresses were successfully saved. Restarting the server no longer erases the settings.
Fast solution for the problem: SSH into the system and execute the "sync" command.
@@vanduhomelab thanks I really appreciate the response.
Have you experienced the backup and restore issues on esxi 7.x! I'm unable to upgrade esxi 7.0 to 7.03 and trying to install 7.03 on usb drive but installation is getting stuck on 70% . Can you guide on that!
@@TheNabpro I have had many failures with installing and upgrading 7.x, but it was a long time ago. I think the issue might be related to the storage devices where you want to install ESXi. What are you using? SD card, USB flash drive, NVMe, or SSD drive? I do not recommend using SD cards or USB flash drives as they tend to fail quickly, typically within six months to a year. I would suggest using SATA SSD drives, which are very affordable. Make sure to buy genuine SSD drives from trustworthy local stores,. There are many fake SSD and NVMe drives on eBay, Amazon, and AliExpress that are actually SD cards inside.