Door Trim and Speakers - Nissan Micra K12
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- How to remove and replace the front door trim and speakers on a 2003 to 2010 Nissan Micra K12. Thanks for watching. Please comment, like and subscribe !.
~~~~ Part Links ~~~~
As an Amazon Associate I earn from qualifying purchases.
🛠️ Socket Set ~ amzn.to/3OLJzne
🛠️ Trim Kit ~ amzn.to/3JD0zeL
Disclaimer: Screwsnutsandbolts is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to www.amazon.co.uk
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2022
Read important information below:
Disclaimer
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts. - ยานยนต์และพาหนะ
Thanks alot for all your k12 videos - saved my ass countless times - need mine running 5 nights a week - food delivery -
However got a blown speaker - measuring the speakers would have been massively useful so i would have known what size to buy before doing the job 😂
You're welcome, I didn't think of that at the time, sorry :)
Nicely done.Thanks.I particularly liked the method you used to remove the plastic door clip without damaging anything ! When ever I do this this type of job with a Manual door winder I've had to fiddle trying to remove the metal clip holding it to the spindle !When reassembling I usually end up replacing the protective membrane with a plastic bin liner!
Lol, Thanks very much. Yeah that plastic handle surround is a particularly bad design.
Thanks bro, attempting this tomorrow
the previous owner got into an accident. the key cable is disconnected. This is just the video i need.
Nice clear video. Thanks.
You're welcome. Thanks for watching!
Would you recommend putting some insulation? As the bass makes the plastic rattle...
That sounds like a good idea !
Question:
In nissan micra k12, on the driver side rear light interior department, there are two cables with connection tab mechanism.
They are coloured in yellow and green.
On the tab, it says push/press (not sure) and .1amp.
What are these cable used for?
Do u by any chance know the size of the screws to mount the speakers.
I'm not sure, sorry
Great video!!! Just in time to educate me before I replace my front speakers on my k12 with some jvc 300w :))
Have a lovely day pal! Thanks again!
Thanks, you too!
What size is the speaker please?
@@aitorSonGallI think it's 16,5cm
If I go to remove the plastic in order to access the lock, do I have to reapply new membrane when refitting?
No, if you peel it off carefully you can glue or tape it back into position
Hey bro! I really appreciate you videos, I’m learning so much about this car for you!
I have some questions hopefully that you could help me, I’m thinking to upgrade the audio estéreo on my Micra, here’s the question, I’ll need like an additional adaptador to connect the horns?
I can't help you there I'm afraid, I don't really do much work on stereo systems
Question
My door has a big dent and my plan is to remove the cover on the inside of the door, ass showed in the video, and push the dent out. But my window cant get all the way down. It stops around 30% left of its way, because of the dent.
Can I do it with the window up?
And coud i damge my window when i push the dent out?
The window is opened to make it easier to hook the top of the door cover into the frame when you're refitting it. You should be able to remove it with the window up. As for the dent, depending on where, and how bad it is, you may be able to push it back out but yes, you will have to be very careful not to put pressure on the glass.
How did you get the window switch pannel removed that easily?? Mine won't come off at all. Broke out a few edges by trying but still won't come off. Are there any hidden screws or anything??
No there shouldn't be. I went by the manual and there was nothing more to it than in the video.
Mmhh alright thanks though! The sourrounding on the door pannel is starting to bulge in and crack while im trying to pry the part out. In the front its lifted out of the clip but I can't even put it back in without taking it out completly. Seems I'll have to break it to get it out :(
Tnx
😊
You're welcome !
What size is the speaker
I don't know, sorry. You can use the serial number to find the specifications
@@screwsnutsandbolts 40watts,4 0hm