Coin Bell Tutorial Part 2
ฝัง
- เผยแพร่เมื่อ 7 ก.พ. 2025
- Creating a Coin Bell from two 90% Silver Proof Quarters. This is Part 2 of a 4 Part Series Tutorial.
*Swedish Wrap using Blue Monster Teflon Tape
*Extruding the Dome
*Sanding the Reed Edge
*Flattening the Dome
*Adding the Topper
See my Facebook page for more coin jewelry at J.P.'s Coin Crafts!!!
/ jps-coin-crafts-104743...
Doming Tools:
coinringtoolsl...
Swedish Wrap Tools:
coinringtoolsl...
Bell Toppers
www.amazon.com...
I like your topper, kind of a more finished look than a hand hammered item.
Klasse Arbeit. Danke für die Filme . Grüße aus Deutschland
Danke!!!
I found the toppers on Amazon and ordered a batch of them and they came today I was pleased with them until I took them out of the little bags only to find that they only sent me half of the screws. So I went to my local hardware store and they had them. And I bought the ten screws that I was shorted. They are metric 3mm. They fit great. Only cost me two more dollars 💵. 😠
Stevan, thanks for sharing your experience. I’ve never had a problem with being shorted on the screws. Glad you were able to find a solution that worked. Hope my videos have helped you in making coin bells. Thanks again for sharing.
I would like to know where you get the topper’s with the ring’s ? I have looked and looked I have if not luck! My name Gary L. I live in IL. If you could help me out I would appreciate
Hi Gary, I get them from Amazon. There are several vendors but I use this one the most.
ZRM&E 20pcs 8x5mm Pull Ring Rivet O Ring Round Head Stud Screwback Nail Rivet 360 Degree Rotation DIY Solid Metal Chicago Screw for Leather Craft Bag Purse/Phone Case Decoration
I also have the link in the description box.
what size die is the swedish wrap? i have the standard kit from legacy tool but my coin goes right thru it ? am i doing to much on the 25 degree die to start with?
For Quarters,I use the .56-.95 Swedish wrap die. It is sold separately from the standard kit. Still can purchase it from coin ring tools Legacy Brand. You are not doing too much with the 25 degree die, just too large of a Swedish Wrap Die.
Where do you get the plate with the hole?
Hi Heather. Coin ring tools LLC Legacy Brand. Look under press accessories. It is sold with or without the hole. 5”x 5” size. Recommend going straight to their site and not ETSY. Better prices.
@@jpcoincrafts Sadly he does not have any plates listed in his Etsy shop right now
@@dhduncan coinringtoolsllc.com/product/one-ton-arbor-press-accessory-kit-ram-head-base-plate-urethane-pad/
The bell toppers, where in amazon did you find them ? Correct name is ?
On Amazon, check out the vendor: ZRM&E 20 pcs 8x5 mm pull ring rivets. Once you see this vendor you should be able to find even more. They are also called Chicago screws for leather bags.
part 3 ??
Glad you enjoyed the first two videos. Should have the last 2 later this week.
Thank you very much, appreciate the info. Btw yes ur bells are beautiful. I've been doing coin work for 9 years now, and there are few that take their time, doing very nice work. You're definately there.
@@Lucky-mn6vc thank you for the kind words. With my tutorial videos I try to be as detailed oriented as possible. Many little things to consider if you want a nice bell, ring or pendant. Thanks again!!!