Thank you! I didn't know that bobbin should have tension. Then I noticed that I threaded the bobbin thread not correctly. Thank you for great explanation!
thankyou - just had my machine professionally serviced but tension still wasn't right ( the test sample had matching colour bobbin thread) anyway the bobbin case was full of very fine dust and now its clean and much better tension. You know your stuff !!!
OMG this saved my life!!! I found the smallest tiny lint in the bobbin holder just like you said. and removing that made such a big difference!! THANK YOU!
I can’t tell you how many times I’ve watched this video and it has saved me - thank you so much for explaining this in such a clear and understandable way because I truly had been looking for a solution for days before I found this!
Thank goodness for competent people!! I watched several other videos about how to fix or trouble shoot tension problems and they were useless. This video described very clearly what to look for. I had the problem of my embroidery suddenly pulling up the bobbin thread to the top of the fabric. When I pulled out the bobbin case and probed with a needle as Mr. Lord shows above, Presto! - out popped a small thread fragment and the PE800 returned to completing its normally beautiful stitching. I am very grateful for the help. Thanks so much.
Same here. Finally what I was looking for! Adjustments are not always from the top thread. I just didn't know how to get to the bobbin case. Thanks to this gentleman!
Thank You. I had just about decided to take my embroidery machine back and have it serviced after playing with the tension. Then decided to check TH-cam out and found you. And in less than 15 min. and the removal of a bunch of "thread dust" it's working great!! Thanks You!!
Yesterday I watched your video on tension and did what you recommend Today my machine is running GREAT Thank you for your help I m using husqvarna epic 1
My upper thread was bird nesting heavily and this video gave me the courage to open the machine up where I was able to see a lot of thread wound up. Now it's fixed. Thank you!!
Thank you!! You Rock!! Hope you share more problems with the Brother machines, I have a babylock and needless to say the tech's get a lot of money for things like this that are so simple...thank you again!
Thanks SO much - this was exactly my problem that has had me stumped for two days with jobs waiting... after cleaning behind the tension springs as you showed my bobbin tension suddenly returned THANK YOU! Have shared this in a couple FB groups to help others as well
Thank you Mr. Lord! It's right before Christmas, and I still have sewing to do, and there's no way I would get this machine back from a dealer in time, and you saved me a lot of money. There must have been a bit of schmutz between the springs; problem solved! You made my night!!
Thanks so much for this help I had been fooling around with the upper 10 Thread tension for hours with no result your help fixed immediately my problem thanks so much for posting this video Brian
Thanks Keith. A very useful video to be able to refer to. Once again, free informative information - you really do go that extra mile. Thanks once again.
Wow! I am sew goad I found Keith Lord! My Destiny has been shredding, and I have done everything my local shop told me, at least 2 times. Two things Keith just explained were problems on my machine. The #6 issue, and the little hook in the bobbin case area both. Now to test.
I have had a lot of problems with my bobbin tension on my dream 2. I continue to have puckering when doing satin stitches. I have done everything, change the needle, thread and trying to correct on bobbin casing, unsure what I am doing wrong. I have also cleaned the area as you showed in this video. Been to be serviced several times and was told there were no problems. So I'll try the suggestion in your video again to try and correct. Thank you for this video.
This video is so helpful! I’m just starting out with my f440e and the bobbin thread was coming through the embroidery, this has given me a glimmer of hope! 😁
Thank you Keith for all the videos you are doing for the V series. I have a V7, sometimes the automatic threader works then suddenly not. I have to hold the thread high in the air and at last second let go, sometimes that seems to do the trick, or I thread by hand, not ideal especially when embroidering!! I have watched your other video too so will get my son to look at it when he can.
Thank you! I started having problems with my bobbin thread and couldn't figure out why. Your tutorial was helpful to learn how to clean the case. Lo and behold, there was a small piece of thread lodged somewhere and my practice stitches look perfect again. It was also helpful to understand the different thread weights for the embroidery only machines vs. the combination ones! I appreciate your taking the time to create this video for us!
Oh my. I got a v5 and I've been tearing my hair out. I thought it wanted to put the adjustable one in...cant wait to try it with the preset bobbin case now and see if it works properly!
This is a brilliant video thank you, my machine is just chewing up my thread and snapping needles for fun. Do you have any ideas what it could be please 🙏
gracias amigo, tengo 5 broher 780, y cuando el hilo gasta la plaquita por donde pasa el hilo le hago con una lija para quitar la rayita que hace el hilio y me queda otra vez trabajando bien, muchas gracias
Brilliant Keith. Thank you for sharing this information it has certainly helped me to understand about the bobbin tension. That’s always scared me, but now when I need to I will refer to this video. Thanks again! X
You just explained everything I needed to know. Thank you. New on embroidery but a pro with my tensions on my long arm. Lol. Thank you. Loved your video n subscriber
there is too much top thread on the underneath of my embroidery design. I am using a Janome 11000 MC any help would be greatfull. the other problem with my underneath tread is looping.
Thanks Keith for your fantastic videos I have learnt so much from you. In this one you mentioned 2 types of thread, was one cotton and one embroidery thread or were they both embroidery thread and if so why do you need to change the bobbin case. This bit confused me a little
Susan, there are two types of Brother bobbin fill for embroidery, the bobbin case is different for each one. You can read more about it in this blog: www.lordsewing.co.uk/blog/2014/07/21/the-mystery-of-bobbin-fill/
As the name says he is the Lord. I have had more problem than I could ever tell you and have been driven to despair, I’ve watched others before finding Mr Lord and they were long winded and useless.m don’t waste your time watch Mr Lord. Thank you so much.
Hi Keith, I have the Innovis 4000D embroirdery machine. The top thread after embroidering is also showing on the wrong side . The white bobbin thread is not visible on the bottom side . Please help , kind regards
The videos posted on my channel go through the scenarios for top and bottom tension issues. Either your bobbin thread is too tight or top thread too loose by the sound of it. You could also read my blog articles which cover the issues -www.lordsewing.co.uk/blog/2014/07/31/know-your-thread-tension/
Thank you! I didn't know that bobbin should have tension. Then I noticed that I threaded the bobbin thread not correctly. Thank you for great explanation!
thankyou - just had my machine professionally serviced but tension still wasn't right ( the test sample had matching colour bobbin thread) anyway the bobbin case was full of very fine dust and now its clean and much better tension. You know your stuff !!!
OMG this saved my life!!! I found the smallest tiny lint in the bobbin holder just like you said. and removing that made such a big difference!! THANK YOU!
I can’t tell you how many times I’ve watched this video and it has saved me - thank you so much for explaining this in such a clear and understandable way because I truly had been looking for a solution for days before I found this!
Thank goodness for competent people!! I watched several other videos about how to fix or trouble shoot tension problems and they were useless. This video described very clearly what to look for. I had the problem of my embroidery suddenly pulling up the bobbin thread to the top of the fabric. When I pulled out the bobbin case and probed with a needle as Mr. Lord shows above, Presto! - out popped a small thread fragment and the PE800 returned to completing its normally beautiful stitching. I am very grateful for the help. Thanks so much.
Same here. Finally what I was looking for! Adjustments are not always from the top thread. I just didn't know how to get to the bobbin case. Thanks to this gentleman!
The best video I've watched so far,machine is sorted now
Thank You. I had just about decided to take my embroidery machine back and have it serviced after playing with the tension. Then decided to check TH-cam out and found you. And in less than 15 min. and the removal of a bunch of "thread dust" it's working great!! Thanks You!!
Thank you soo much for the in-depth explanation of why and how this is caused and happening!
Yesterday I watched your video on tension and did what you recommend
Today my machine is running GREAT
Thank you for your help
I m using husqvarna epic 1
My upper thread was bird nesting heavily and this video gave me the courage to open the machine up where I was able to see a lot of thread wound up. Now it's fixed. Thank you!!
Thank you!! You Rock!! Hope you share more problems with the Brother machines, I have a babylock and needless to say the tech's get a lot of money for things like this that are so simple...thank you again!
Thanks SO much - this was exactly my problem that has had me stumped for two days with jobs waiting... after cleaning behind the tension springs as you showed my bobbin tension suddenly returned THANK YOU! Have shared this in a couple FB groups to help others as well
Thank you Mr. Lord! It's right before Christmas, and I still have sewing to do, and there's no way I would get this machine back from a dealer in time, and you saved me a lot of money. There must have been a bit of schmutz between the springs; problem solved! You made my night!!
Thank you! Found lint in the bobbin holder that I didn't see before and wow, everything running smoothly again. Thank you!!!
Thank you Keith, you have spared me a mental breakdown
Thanks so much for this help I had been fooling around with the upper 10 Thread tension for hours with no result your help fixed immediately my problem thanks so much for posting this video Brian
Oh my goodness! Thank you! I couldn't understand why my machine all of a sudden had tension problems! This fixed my issue perfectly!
Thank you saved me hours and days of tears of me trying to figure it out on my own. Easy to follow instructions! loved the video
Thank you for this ❤️
I was in absolute tears bc the bobbin kept showing on top. Now it’s all fixed ❤️
Thanks Keith. A very useful video to be able to refer to. Once again, free informative information - you really do go that extra mile. Thanks once again.
Wow! I am sew goad I found Keith Lord! My Destiny has been shredding, and I have done everything my local shop told me, at least 2 times. Two things Keith just explained were problems on my machine. The #6 issue, and the little hook in the bobbin case area both. Now to test.
Thank you ever so much! My bobbin thread was coming to the top and now it is not. Cheers!!
I have had a lot of problems with my bobbin tension on my dream 2. I continue to have puckering when doing satin stitches. I have done everything, change the needle, thread and trying to correct on bobbin casing, unsure what I am doing wrong. I have also cleaned the area as you showed in this video. Been to be serviced several times and was told there were no problems. So I'll try the suggestion in your video again to try and correct. Thank you for this video.
Thank you so much, I didn't realise the Brother M280D bobbin was pre-set. Very helpful video
This video is so helpful! I’m just starting out with my f440e and the bobbin thread was coming through the embroidery, this has given me a glimmer of hope! 😁
Thank you king I had no idea what I struggling with
You just saved me so much time. Thank you so so much for all of your help
Thank you Keith for all the videos you are doing for the V series. I have a V7, sometimes the automatic threader works then suddenly not. I have to hold the thread high in the air and at last second let go, sometimes that seems to do the trick, or I thread by hand, not ideal especially when embroidering!! I have watched your other video too so will get my son to look at it when he can.
Thank you so much of your video. I finally figured out and solved the bobbin thread issue of my embroidery machine.
Thank you so much. You just helped me fix my machine thanks to this video. I'm grateful 🙏
Thank you! I started having problems with my bobbin thread and couldn't figure out why. Your tutorial was helpful to learn how to clean the case. Lo and behold, there was a small piece of thread lodged somewhere and my practice stitches look perfect again. It was also helpful to understand the different thread weights for the embroidery only machines vs. the combination ones! I appreciate your taking the time to create this video for us!
Really good video. My XE2 came with really tight bobbin tension. On lettering I could not see any bobbin thread at all.
Oh my. I got a v5 and I've been tearing my hair out. I thought it wanted to put the adjustable one in...cant wait to try it with the preset bobbin case now and see if it works properly!
This is a brilliant video thank you, my machine is just chewing up my thread and snapping needles for fun. Do you have any ideas what it could be please 🙏
You are a star...... Thank you so much for this simple fix.
Brilliant! going off to check my bobbin case right now
Thank you for sharing your expertise! This solved my problem, and I am so happy!
gracias amigo, tengo 5 broher 780, y cuando el hilo gasta la plaquita por donde pasa el hilo le hago con una lija para quitar la rayita que hace el hilio y me queda otra vez trabajando bien, muchas gracias
Thanks for that enlightenment. You just helped me resolve some problems.
Thank you for making this video. It was exactly what I needed.
Thank you!! Cleaned debris from bobbin case. Working good again.
Thank you! I am trying to get to know my SE machine better and this was very helpful.
Brilliant Keith. Thank you for sharing this information it has certainly helped me to understand about the bobbin tension. That’s always scared me, but now when I need to I will refer to this video. Thanks again! X
You just explained everything I needed to know. Thank you. New on embroidery but a pro with my tensions on my long arm. Lol. Thank you. Loved your video n subscriber
Thank you thank you so much. I just couldn’t figure it out and. Guess what I had the wrong bobbin in. I’ve for an explanation and I got it. Thank you.
Thank you, sorted my machine out😊
Fantastic video, thank you so much this really helped me!!!!!
Thank you, I recently had my dream machine serviced and now it’s not working properly. I think it’s the wrong size bobbin case inside.
How do you fix the Issue where when you use the automatic cutter the thread pulls puckering the fabric?
there is too much top thread on the underneath of my embroidery design. I am using a Janome 11000 MC any help would be greatfull. the other problem with my underneath tread is looping.
I have tried everything you mentioned in the video and I'm still having issues. Can you recommend anything else I can do?
Thanks Keith for your fantastic videos I have learnt so much from you. In this one you mentioned 2 types of thread, was one cotton and one embroidery thread or were they both embroidery thread and if so why do you need to change the bobbin case. This bit confused me a little
Susan, there are two types of Brother bobbin fill for embroidery, the bobbin case is different for each one. You can read more about it in this blog: www.lordsewing.co.uk/blog/2014/07/21/the-mystery-of-bobbin-fill/
hi , have you ever had a problem that embroidery machine start to suck fabric under ? no matter what I do it is still sucking it in
Thank you! My machine is working great again
I have no bobbin thread on the backside of embroidery - I have tried and tried adjusting an can not get bobbin thread to show
what am i doing wrong?
Hello. Can you tell me what the replacement bobbin case is for the SE600?
Patricia, you need to make enquiries in your country as this model is not one we have in the UK.
Very clear and useful thank you
Thank you for this video, it's been very helpful.
Excellent advice, thank you
As the name says he is the Lord. I have had more problem than I could ever tell you and have been driven to despair, I’ve watched others before finding Mr Lord and they were long winded and useless.m don’t waste your time watch Mr Lord. Thank you so much.
The Word I hate the most is.... Bobbin😮😢😂 thanks for the video.
Hi Keith, I have the Innovis 4000D embroirdery machine. The top thread after embroidering is also showing on the wrong side . The white bobbin thread is not visible on the bottom side . Please help , kind regards
The videos posted on my channel go through the scenarios for top and bottom tension issues. Either your bobbin thread is too tight or top thread too loose by the sound of it. You could also read my blog articles which cover the issues -www.lordsewing.co.uk/blog/2014/07/31/know-your-thread-tension/
I m having thread breaking problem when i m doing decorative stitching my top thread is breaking all the time can u help me
Keith you legend 👏🏿👏🏿
Very helpful! Thank you!!
thank you for your help!
I wish i had found this video before i went and changed the factory sealed green screws 🤣🤣🤣
Omg thank you sooooo much for this video!!!
Thank you so so much ❤
Thank you SO much!!
Many thanks for this video
Thank you so much
Thank you
Very helpful and informative, thank you!
THANK YOU !!!
Thank you, I'll keep that in mind.
Love you my hero
How do i revirse the machine language to english fron french
Wow, a tiny bit of thread can cause all that trouble!
Thank you, valuable informations