Adding Color to Plaster Sculptures

แชร์
ฝัง
  • เผยแพร่เมื่อ 28 ส.ค. 2024
  • Learn about 2 basic ways to add color to porous (plaster, terra cotta, wood) sculptures. Choosing when to seal the surface makes all the difference!
    -----
    Subscribe for more: / bethanylutheran
    Stay plugged in with campus:
    💻: / bethanylutherancollege
    🐦: / bethanylutheran
    📸: / bethanylutherancollege
    Bethany serves students by providing a Christian education through stimulating academics, personal mentoring, and a pursuit of discernment, knowledge, and truth.
    👋 Say hello and see if Bethany could be the fit for you: blc.edu/admissions

ความคิดเห็น • 40

  • @tsinoy
    @tsinoy 2 ปีที่แล้ว +6

    I am in the 10-minute mark but so far, I find his explanations really clear, logical, and extremely helpful. Thanks!

  • @davidtruesdell4113
    @davidtruesdell4113 2 ปีที่แล้ว +7

    This guy is a great instructor, great tips, also he's like the Bob Ross of Sculpture

  • @jasonhopkins2890
    @jasonhopkins2890 3 ปีที่แล้ว +7

    This is an incredibly informative video - I'm so lucky you made this for me!

  • @AlejandraRafa
    @AlejandraRafa ปีที่แล้ว +2

    Really informative and enjoyable instruction, thank you so much for the video!
    I would probably wear a mask while brushing the sculpture, especially if I did often; I can see some plaster dust in the air around 37:55 for example, and you don’t want it to get in your lungs.
    Again, thank you! You seem like a great teacher.

  • @BountifulChildrensFoundation
    @BountifulChildrensFoundation 4 หลายเดือนก่อน

    Bob Ross vibes for sure. Thank you for the info!

  • @cliffdariff74
    @cliffdariff74 5 หลายเดือนก่อน

    Stain and seal... the best, most authentic way.. ive used cheap water color with ting bit of pva glue and water. (Elmer's glue)... then paste wax...careful with shoe polish brush, youll chip the plaster with the handle if not careful.
    Instant coffee with no cream or sugar, over a light color wash adds depth 😊

  • @redfog42
    @redfog42 2 ปีที่แล้ว +2

    That was very interesting, thank you. I was given a pair of pop figurines to restore and paint and this has given me some fresh ideas on how to approach it. I'm delighted to say I have shellac already as well as the wax that I used on other projects. Cool!

  • @weltidesign
    @weltidesign ปีที่แล้ว +2

    I just learned so much from this. Acrylic paint was peeling off my sculptures almost immediately. Could not figure out what I did wrong. Might go for a more lime-washed look using a sponge instead of a brush.
    Curious if you can recommend any everyday household products to be substituted for the wax and sealer?

    • @weltidesign
      @weltidesign ปีที่แล้ว

      Ok so I actually just tried the watered down paint mixture on 4 of my plaster pieces. The mixture stuck to 2 of them. But the other 2 stayed the color of plaster.
      Any idea why this happened?

  • @evonne-arcaneforge3864
    @evonne-arcaneforge3864 ปีที่แล้ว

    Super useful, thank you for sharing your expertise

  • @chandyscreations4211
    @chandyscreations4211 2 ปีที่แล้ว +3

    After sealing and painting with Acrylic, do you suggest using varnish to coat the finished project? If so, what do you suggest?

  • @cchemmes-seeseeart3948
    @cchemmes-seeseeart3948 ปีที่แล้ว

    I appreciate the video immensely. I greatly need help with these questions: 1. Acrylic paint: how can you paint it over shellac since acrylic is water based? Is not shellac oil based? (in the video you say 'resin'?). 2. Acrylic paint is used as a stain in this video; I understand that, so you alter normal use of acrylic paint, which normally should never be so severely diluted with water. Dilution removes normal adhesive properties of the paint, which is okay as you show for staining, but it seems it would better to retain the adhesion property, in order to strengthen the plaster. Would it not be better to use the very thin acrylic paint products that are similarly thin/ staining, but retain adhesive properties so as to make the plaster less fragile? (such as acrylic ink + high flow medium; or acrylic high flow paints... & mediums like acrylic airbrush medium)?

  • @Curleification
    @Curleification 2 ปีที่แล้ว +2

    That's a very insightful video! I am doing some sculptures using plaster of paris. I want to protect the final sculptures but I want the touch and white color to remain the same. Could you kindly tell me what type of sealant you suggest for that?

  • @b_h_a_v_i_k
    @b_h_a_v_i_k 2 หลายเดือนก่อน

    This is great! Does this method work on Hydrostone?

  • @mirjanauzelac2703
    @mirjanauzelac2703 3 ปีที่แล้ว +1

    Thank you very much for the video. :)

  • @maddieh7806
    @maddieh7806 3 ปีที่แล้ว

    "very scientifically... blop in some glops" love that

  • @ngkaka123
    @ngkaka123 ปีที่แล้ว

    helpful video! thank you

  • @sandramendez5925
    @sandramendez5925 2 ปีที่แล้ว +1

    I know that adding elmers glue to plaster makes it stronger...would GAC make a better consistency?

  • @ianmcpherson1078
    @ianmcpherson1078 3 ปีที่แล้ว +2

    Can you paint acrylic paint onto a stained-then-waxed plaster sculpture? I like the way it comes out but I want to add lines of detail or shading with another color paint

    • @Alibeeee
      @Alibeeee 3 ปีที่แล้ว +1

      I would refrain from waxing. Put some diluted shellac on top to make the plaster less absorbent and then you can use acrylic on top. If you wish afterwards you can apply wax on top of that. Otherwise the wax will resist the paint layer.

  • @GrandPrizeFitnesAJAY
    @GrandPrizeFitnesAJAY 2 ปีที่แล้ว

    Thanks ❤

  • @Legallyblindart
    @Legallyblindart 3 ปีที่แล้ว

    Thank you for your video

  • @baribiernsedar3481
    @baribiernsedar3481 3 ปีที่แล้ว

    Thanks, so much.

  • @HH-wh1kh
    @HH-wh1kh ปีที่แล้ว

    Thanks! can i stain so that everything is evenly wthout seams?

  • @Worldfriends218
    @Worldfriends218 ปีที่แล้ว

    HI what the best paint to you on plaster our lady statue - it very old what do you recommended thanks

  • @ART-N-AROUNDCOM
    @ART-N-AROUNDCOM 3 ปีที่แล้ว +1

    Is there a way to paint the plaster sculpture then seal so it can be in the weather with out being ruined?

    • @steve998
      @steve998 3 ปีที่แล้ว +1

      Varnish it.

  • @michelleelwell5537
    @michelleelwell5537 ปีที่แล้ว

    Is it possible to pigment the plaster before sculpting? I’m after a black plaster that as you said respects the integrity of the plaster itself rather than hide it. Hoping you monitor your comments even after 2 years.

    • @feldspar4190
      @feldspar4190 9 หลายเดือนก่อน

      For the rectangle plaque that was marbled he said he had pigmented the plaster before pouring it. I’m uncertain what he used to pigment, have not made it through entire video. If you want a rich black you may struggle overcoming the plaster base.

  • @isabellaahued2896
    @isabellaahued2896 2 ปีที่แล้ว

    after using acrylic paint then paste wax can i put coats of linseed oil on it to waterproof it??? or can i not paint it a color first

    • @isabellaahued2896
      @isabellaahued2896 2 ปีที่แล้ว +1

      if u see this pls help im an art student and my projects due soon :,)

    • @youtubemaster4282
      @youtubemaster4282 2 ปีที่แล้ว

      You can probably email him directly to his official school email address

    • @skateboardingjesus4006
      @skateboardingjesus4006 2 ปีที่แล้ว

      Don't use linseed oil. Use clear shoe polish, or floor wax, after you've painted it.

  • @HarryNicNicholas
    @HarryNicNicholas 2 หลายเดือนก่อน

    if you left god out of it i might have watched but i'm not really into voodoo. if god inspires your art then you are redundant, god might as well do it himself.

  • @Chucosan
    @Chucosan 8 หลายเดือนก่อน

    shellac is made from bugs!.... Bugs!

  • @Brewskin78
    @Brewskin78 2 ปีที่แล้ว +2

    NEVER, NEVER mix a paint solution with a brush. When one does, thoughtlessly, mix paint with a brush, paint will, through capillary-action, retain un-mixed paint and pockets of water or un-integrated solvent, resulting in a terribly inconsistent application. Moral takeaway: A smock and a beard does not an artist make.

    • @redfog42
      @redfog42 2 ปีที่แล้ว +1

      I was surprised by this too and while I wouldn't do it this way myself, I suspect the man, with the lovely beard, was doing it his way. (Or didn't have a mixing stick to hand) 😉

    • @jasonjaspersen806
      @jasonjaspersen806 ปีที่แล้ว

      agreed

    • @cliffdariff74
      @cliffdariff74 ปีที่แล้ว +1

      Ummm... did you ever consider a person that is an artist is free to create , AND discover all the possibilities and incidents that are the hallmarks of a true piece of art?... Not craftsmanship my friend, smock or no smock.

  • @nicholasvanstrander852
    @nicholasvanstrander852 ปีที่แล้ว

    Extra points for the Cafe Bustelo can.IYKYK