Mine arrived yesterday opened everything up took time to learn how to tread as because it's modern everything has changed but once l sorted that out l have tried a few stitches embroidered my name l am enjoying this machine so my weekend is going to be spent on my new machine l just love it
Hi, I have just bought the Brother FS130QC too, it arrived today and I've been doing a stitch library. However, when I tried to stitch the letters it made a horrible noise and the thread just knotted under the fabric. Are you supposed to use stabiliser under it?
I use a iron on stabiliser if you don't it makes an awful mess. The needle speed is set by the machine no matter what it is set to it will use the machines option. I have tried to personalise on a sweatshirt and it is the only thing that I cannot do lettering on at the moment
Hi If this helps…… I have just received my Brother FS130QC and have monogrammed lots of samples, (with no stabiliser fabric, although I’m sure it would help to strengthen the monogram placement), on thin double shirt cotton without a problem, except one time…… The problem…. After a couple of stitches the machine stopped sewing, with a noisy grumble, and the fault E6 started flashing in the display, E6 fault (p93) means that the thread is tangled on the wrong side of fabric, and suggested the cause was ‘incorrect upper threading’. What I’d done was to not 'raise the needle to the upper position' before doing the upper threading (p23)…. So the thread had not been guided correctly through the thread take-up lever (p25) ….. Therefore the machine displayed fault E6. I followed the Remedy suggested (p93) removing the tangled thread and stuck fabric then re-threaded the upper thread … this time correctly with needle raised. Sounds more complicated than it actually was…. and a reminder to me to always raise the needle by turning handwheel or better still to simply press the Needle Position Button to up position.
the needle threader on my machine gets stuck. Fixed it try to use it I'm and still can get it to work. I've watched this video several times. When I used it I'm not sure I am getting the thread right on the right side.
Santa Claus just delivered to me a lovely Brother FS130QC and to answer your question the button above the reverse/reinforcement stitch button is the 'Needle Position Button'. Quote from instruction booklet … “Press the needle position button to raise or lower the needle. Be sure to raise the needle before threading the needle. Use this button to change the sewing direction or for detailed sewing in small areas. Pressing the button twice sews one stich”. End quote. In effect pressing the needle position button twice, sews one stitch. This machine does not have an automatic thread cutter; the included thread cutter is located on the left rear of machine.
Hi I have just bought this brother sewing machine I have two question please when I start sewing it’s very messy on the underneath fabric am I doing something wrong ? And when I am sewing my cotton stapes a lot again could you tell me what I am doing wrong ? I do appreciate your help thanks. Mandy
![[TH] VCT Pacific - Playoffs // T1 vs PRX | GEN vs DRX](http://i.ytimg.com/vi/8FpC03jCU_Q/mqdefault.jpg)
thanks that to me is the best information video on brother machines on youtube thanks very much keep them coming
Thanks for making sewing so easy for me. I’m grateful 😇
Hi sorry if I missed this info but what is the most amount of characters you can do in one go?
thankyou, I can watch now before my machine arrives lol.
Is this machine a high or low shank ?
I have the fs180qc. What stitch should I use with the quarter inch foot
Mine arrived yesterday opened everything up took time to learn how to tread as because it's modern everything has changed but once l sorted that out l have tried a few stitches embroidered my name l am enjoying this machine so my weekend is going to be spent on my new machine l just love it
Hi, I have just bought the Brother FS130QC too, it arrived today and I've been doing a stitch library. However, when I tried to stitch the letters it made a horrible noise and the thread just knotted under the fabric. Are you supposed to use stabiliser under it?
I use a iron on stabiliser if you don't it makes an awful mess. The needle speed is set by the machine no matter what it is set to it will use the machines option. I have tried to personalise on a sweatshirt and it is the only thing that I cannot do lettering on at the moment
Hi If this helps…… I have just received my Brother FS130QC and have monogrammed lots of samples,
(with no stabiliser fabric, although I’m sure it would help to strengthen the monogram placement), on thin double shirt cotton without a problem, except one time…… The problem…. After a couple of stitches the machine stopped sewing, with a noisy grumble, and the fault E6 started flashing in the display, E6 fault (p93) means that the thread is tangled on the wrong side of fabric, and suggested the cause was ‘incorrect upper threading’. What I’d done was to not 'raise the needle to the upper position' before doing the upper threading (p23)…. So the thread had not been guided correctly through the thread take-up lever (p25) ….. Therefore the machine displayed fault E6. I followed the Remedy suggested (p93) removing the tangled thread and stuck fabric then re-threaded the upper thread … this time correctly with needle raised.
Sounds more complicated than it actually was…. and a reminder to me to always raise the needle by turning handwheel or better still to simply press the Needle Position Button to up position.
Can this machine be used without the foot control ? .
i can have one for 160 quid as new is it a good buy
the needle threader on my machine gets stuck. Fixed it try to use it I'm and still can get it to work. I've watched this video several times. When I used it I'm not sure I am getting the thread right on the right side.
Could you do a fs180qc tutorial
does this machine have an automatic thread cutter eg what is button above reverse option for?
it is the needle up or down button
Santa Claus just delivered to me a lovely Brother FS130QC and to answer your question the button above the reverse/reinforcement stitch button is the 'Needle Position Button'.
Quote from instruction booklet … “Press the needle position button to raise or lower the needle. Be sure to raise the needle before threading the needle. Use this button to change the sewing direction or for detailed sewing in small areas. Pressing the button twice sews one stich”. End quote. In effect pressing the needle position button twice, sews one stitch. This machine does not have an automatic thread cutter; the included thread cutter is located on the left rear of machine.
How do you select 55
Hi I have just bought this brother sewing machine I have two question please when I start sewing it’s very messy on the underneath fabric am I doing something wrong ? And when I am sewing my cotton stapes a lot again could you tell me what I am doing wrong ? I do appreciate your help thanks. Mandy
Hi Mandy try adjusting the tension - there are some good videos on this on youtube. I think it is called 'gathering'.
How to perform picco
How do I youse a flower foot on this machine
How do I get my flower foot to work on this machine
Very useful thank you Elaine
✌️💐👍
I love the video but do we seriously need the aggravating horrible music