Thank you Pawel. This video is getting a bit old but the interface still looks the same. I wasn't game to flash the firmware until I could see what version I already had. Too many numbers to tell what it was. ;)
Thanks for your video. How do I know which firmware to flash to, which code do I choose? Yours in the video was A-H-30 I believe. I have Spedix IS 30 esc’s I need to flash. They had Blheli S on them when I go them. Mine say Q-H-20 when I Read Setup, but don’t know if that is correct. Thanks for your help.
I'm faced with a similar question too! I can't seem to find any articles either on clarifying this or what any of the abbreviations mean.. Mine are currently set on the J-H-25, my ESC's are the Makerfire BLHeli_S 35A
Hi there, Cool Video and I´m new to the hobby and I´m a little bit confused? I followed all your steps, but when I hit read set up, nothing shows up? I mean there is no information at all. It only says: Running - OS: Windows, Chrome: 77.0.3865.120, Configurator: 1.2.0 Serial port successfully opened with ID: 1 MultiWii API version received - 1.44.0 Flight controller info, identifier: BTFL, version: 4.3.2 Running firmware released on: Nov 28 2022 07:30:19 Board: S7X2, version: 0 Unique device ID received - 0x3200443132511930393738 Reading setup Reading setup finished What am I doing wrong?
I would like to see a vid on ppm min throttle setting in blheli and how it relates to min idle speed in betaflight. I noticed that in this video, your ppm min throttle settings were set very low, (as are mine) but others I see , they have ppm min throttle set around 1150-1180. Why would you want that set so high. Would you not have to set min idle speed up high as well in betaflight to spool up the motors and some quads may even start to lift at that setting. Any explaination would be appreciated. Thx.
@@FPVUniversity When I powered the quad up the escs booted at different times. I then changed the A-H-25 esc to 16.0 and now they power up at the same time. Have yet to fly still making sure it's all fine.
Can you program any esc with blheli? I have an esc 120ah for my helicopter and do not know what brand. Doe the program let you see what you have? Can you program it from there with softstart lipocount and all that?
witam, mam mały problem, mam Favourite Little Bee BLheli_S 30a OPTO esc sklejone z lumenier lux na betaflight 3.3.3 podązałem za Twoimi wskazówkami i innych tez. Lecz nie udało mi sie podłaczyc pokazywało mi ze jest jakis error i configurator kazal mi zrestartowac fc... czy robie cos zle czy moj bzyk moze byc niekompatybilny do tzw passthrough?
Many thanks! Very helpfull for a newbie like me :)
Thank you Pawel. This video is getting a bit old but the interface still looks the same. I wasn't game to flash the firmware until I could see what version I already had. Too many numbers to tell what it was. ;)
Super, idealny dla kogoś kto rozwija temat. Rewelacja !!!
Thanks for your video. How do I know which firmware to flash to, which code do I choose? Yours in the video was A-H-30 I believe. I have Spedix IS 30 esc’s I need to flash. They had Blheli S on them when I go them. Mine say Q-H-20 when I Read Setup, but don’t know if that is correct. Thanks for your help.
I'm faced with a similar question too! I can't seem to find any articles either on clarifying this or what any of the abbreviations mean..
Mine are currently set on the J-H-25, my ESC's are the Makerfire BLHeli_S 35A
How do I set the PPM Min and Max Throttle???
I appreciate you for the video.
Hi there,
Cool Video and I´m new to the hobby and I´m a little bit confused?
I followed all your steps, but when I hit read set up, nothing shows up? I mean there is no information at all. It only says:
Running - OS: Windows, Chrome: 77.0.3865.120, Configurator: 1.2.0
Serial port successfully opened with ID: 1
MultiWii API version received - 1.44.0
Flight controller info, identifier: BTFL, version: 4.3.2
Running firmware released on: Nov 28 2022 07:30:19
Board: S7X2, version: 0
Unique device ID received - 0x3200443132511930393738
Reading setup
Reading setup finished
What am I doing wrong?
Hi dear, i have blheli esc 50 amp, want to know how i can set break and throttle calibration and factory reset,with the help of radio
Hi
I click read setup and I get nothing, what am I doing wrong?
in trying to follow you here, the configurator only sees 2 of the 4 motors. how do i fix this issue?
Dobra robota:)
I would like to see a vid on ppm min throttle setting in blheli and how it relates to min idle speed in betaflight. I noticed that in this video, your ppm min throttle settings were set very low, (as are mine) but others I see , they have ppm min throttle set around 1150-1180. Why would you want that set so high. Would you not have to set min idle speed up high as well in betaflight to spool up the motors and some quads may even start to lift at that setting. Any explaination would be appreciated. Thx.
Hii sir, i can connect the blheli32/ blheli s esc to esc configurator using Arduino Uno board to write and flash esc,if know please let me know sir
Great video but I can’t get mine to connect. It will show plugged in but won’t connect
Maybe you have BLHeli_32?
Please help. Nothing pops up when I click on READ SETUP
Trinity Prairie
Can I use different ESC on a build? How do I make them all work together? 3 escs have A-H-20 16.0 and the 4th has A-H-25 16.9.
that's not a problem, everything will work fine
@@FPVUniversity When I powered the quad up the escs booted at different times. I then changed the A-H-25 esc to 16.0 and now they power up at the same time. Have yet to fly still making sure it's all fine.
Hi I have LittleBee20amp escs but only see one on the config screen how do I fix this they are functioning when in beta flight
Can you program any esc with blheli? I have an esc 120ah for my helicopter and do not know what brand. Doe the program let you see what you have? Can you program it from there with softstart lipocount and all that?
what firmware for dys xsd 20a ? A-H-30 or G-H-70 or more?
534 White Loaf
witam, mam mały problem, mam Favourite Little Bee BLheli_S 30a OPTO esc sklejone z lumenier lux na betaflight 3.3.3 podązałem za Twoimi wskazówkami i innych tez. Lecz nie udało mi sie podłaczyc pokazywało mi ze jest jakis error i configurator kazal mi zrestartowac fc... czy robie cos zle czy moj bzyk moze byc niekompatybilny do tzw passthrough?
Tak, część sprzętu nie będzie działać. Na przykład moje FC of FrSky są bardzo oporne
Is the right version automatically there or do i have to know what kind of firmware my esc's got? (Just as a flight controller)
It will not work with BLHeli_32 at all
Paweł Spychalski i got the dys xsd v2 so not dshot 1200
Low settings Joshwa Bardwell
59351 Reilly Harbor