Vevor diesel heater first start. How to Prime your heater!
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- I give a quick overview on the importance of priming your unit before the first start. I show the proper priming procedure for this unit and start my new diesel heater for the first time!
This unit is great and pumps out the heat.
Unboxing and initial review: • Vevor diesel heater un...
Please subscribe for more: www.youtube.co...
ignore the ha8ters, nice video young fella ! Some peoples kids ehhh ! Just ordered 1 for my garage to take the chill off in the winter. Hope to keep garage 12-15c for half a day at least will update my findings in a few months ,Cheers...Alberta ,Canada
Great video man. Keep up the good work!
Mine started up no problem, all I did was press the start button. It is a vevor
That’s awesome to hear, I primed mine before the first start. I know when I have installed the espars and webasto on trucks they always have to be primed or they don’t go:) thanks for letting me know.
Mine not, only error E03 on displey, any help what to do?
Same as mine, my tank was cracked from the get go
I started the machine without priming and it works flawlessly. Overnight I watched some videos like your where people priming the units and now a have a lot of white smoke and a few drops of diesel to exhaust. I just stopped the heater after 2 minutes. When I have the time I will try to get of the leakage.
Thank you for doing the video
@@Tryyourhand thank you for watching!
thank you!
If that’s how they write the directions with worse English than a 1st grader. How can I trust they made the diesel heater safe? I already puchased mine but man..that is concerning.
@@MargoPOV I did a unboxing video of the heater and there were a couple concerning things but over all it works well.
I’ve heard people say that these don’t have a properly sealed heat exchanger chamber and diesel fumes can get in to your living quarters,,,have you experienced anything like this with this particular brand????
I haven’t noticed but I do use it in my garage at this time. I will have to check it next time I use it
If this would work safely for me I have a really good idea for it I could put it right outside my house and come through the basement window with the actual heat duct pipe and run it into a already existing furnace register vent I wouldn’t try and do the entire venting system in the house just one coming into the living room I’m very worried about fumes though
I totally skipped this step and mine started up fine . Did I screw up ?
My question is this. Can I connect a plug on the end of the two wires it came with that screw onto a positive and negative pole? Can I connect a cigarette lighter plug to it and run it off my powerbank
Run mine off my power bank personally.
How long to prime? I have heard somewhere that overpriming can cause oversmoke at start
I just let it prime till I saw the fuel go into the heater/ fill the lines
Mine fired right up no problem ...i thought the ticking it the auto priming .
Thanks for letting me know. I have the priming issue when installing other units on trucks that have longer fuel line run:) thanks again
How do you like it so far. Just got one. How many hours have you put on it so far? Thanks for the video
I have really enjoyed it so far. I have about 6 hours on it at this point. I am hoping to get it out this season more and set it up in the garage as well
Thanks
How do you make the lcd screen brighter can see information on screen hard to see
What power is connected
I used a 12v deep cycle battery. I also sometimes I connect my 7ah lithium battery or my power station I made.
I just found out it was set for 24 v, I'm 12
The wiring of our vevor remote control got cut off from the machine by accident and cant open the controller to fix. We bought a chinese remote co troller and connected the wiring, but it doesnt seem to be working. Any suggestion?
The fuel pump delivery is 0.2 ml per pump and the pump is a electro magnet with a metal pisten..the only lubricant is your diesel..In short to prime by the pump your destroying it as 0.2 ml ea pump will take way to many cycles to prime metal on metal..they push harder than they can draw..there not like a car pump with a diaphragm..
I'd avoid using the prime operation at all costs and prime it manually..especially using the Chinese flex fuel line..
It should be 2mm internal hard nylon for the fuel delivery to work correctly..
Prime manually and protect your dosing pump..
Thank you for your information on this!
I cant figure out if the fuel line has to be full of fuel or have air in it. Mine is almost all air and just little amounts run down the line but it still runs. Not sure if that’s correct or not.
Mine is the exact same way. Have you figured it out yet?
Mine is almost completely air with it trickling in from the pump. It seems to be running fine although the pump is a little loud.
It tried priming it a little longer but nothing changed
I just received and set up for use and it says ignition plug error.
Vevor, i can hear a slight buzz when is attempts ignition , then error 3
Mine the same error 03 , please how to fix it?
Would be nice to see the instructions to set temp on and off . As mine never came with anything
Mine ran for two months now it won't start an error code 026 🤷
O26? Is it a Vevor unit? Might have to call their customer service for help with that
You pushed a lot of buttons didn't say what you are doing
At 3:26 I press the left and right arrow and hold them down to prime it. Hope that helps
Melba Light
O'Keefe Estates
Wyman Falls
Push the two arrows and nothing?
What controller do you have? Did you hold them down together at the same time?
Same one I figured it out Thanks
Weissnat Creek
White Street
Where is the fuel filter? -does it even exist?
It does not come with a fuel filter, I am sure adding a webasto inline filter wouldn’t hurt as long as the flow isn’t restricted. I personally have seen many units in transport trucks with no filter run 2000 hours without a hiccup and lots longer.
Odie Shoals
Dudley Mount
Stephania Plain
Funk Road
Donnell Mills
Roel Highway
Xavier Springs
Telly Fall
Wait a minute. Press this press that and press the other thing. Why not show starting it?
I show the priming at 3:26 and after that I fire it up. Hope that helps.
Jarrett Heights
Adrienne Lakes
So you litteraly had to waste time reading ALL the instruction for priming..... think point was made just reading 1 line. This video could have been 2 minutes max...
Could have made a version and posted it on shorts. Thanks
@@joshfishing just really tiring, that so many TH-cam videos on purpose are way longer than they need to be, just to get more viewing time. People are getting tired of that trend
@@ph5740all you do is complain.
@@jme214 and thats something you know?
@@ph5740 it's what I gathered. I know nothing without all the data points. These heaters are not fully explored, and it seems you should stick to fire wood for your needs.
Dane Ports
Langosh Parkways
Joannie Manor
Osvaldo Port
Click bait
Click bait, click plate, please click on all the videos mate.