Lightweight is good and what did I use it for it’s a lawnmower th-cam.com/users/postUgkxTPN04aT-Qdjr_KS3ql7ng8wnU3wwsCqk also recommend Yes it is lightweight so hence not as robust as our old one. But if you take care it does the job really well.
Just adding the bigger wheels also slightly increases your gear inches even more. Slower to accelerate, but higher top speed and holds speed better and won't get stuck in soft surfaces as easily. I learned a lot from riding a 29er mountain bike. Like how I never could get the gearing as short as on anything smaller
I couldn't stop laughing on the first test run~! Love this kid and love how honorable he is. It's not about leaving a better planet for our kids...... it's about leaving better kids for the planet. Thanks Grandpa!!
When I was a little boy me and my grandpa would drive the tractor. And I would sit on his lap there was many times we would go out of control. And we both would hold the steering wheel as tied as we could.
When I was a kid (70s/80s) my parents had a Snapper riding mower with a 5hp rear engine. THAT thing was FAST! If you popped the clutch in top gear, you could ride a wheelie across the yard. I'm giving my parents a lightly used Craftsman riding mower, and I think I'm going to build a "racer" out if their old Troy-Bilt. Most people lower their mowers so they handle better!
Dude I know what You're talking about! I have one in my folks storage shed. After mowing the lawn I'd put that sucker in 5th turn off the blade engagement lean back and drop the clutch lol Wheelies all day! Loved that snapper
Tip presented in good faith: it will chew through belts if you engage the blades while the engine is full throttle. You are supposed to turn the blades on at low throttle then increase to cutting rpms! Paused at 4:18 to comment this but I'm enjoying the video and will finish watching!
I think it’s a safe assumption that you’ve got grampys genes! The pulley ratio is too tough to start out in fifth, that’s why it stalled. I’d just start in third and work my way up but also throw a tension pulley on the belt to help keep it tighter. Man did I get a great idea from this. I have an l100 also and an stx38 I’ve been wanting to use strictly as a wagon puller for yardwork anyway so it looks like I’ll be listing the 38” deck on the marketplace and building me a workhorse like yours! 😉 Thanks for taking us along. A helmet would be a great idea. Remember it’s not how fast you go, it’s that sudden stop ending your ride that’ll hurt! (I just buried a brother who got hit on his bike SIX HOUSES AWAY FROM HOME!) So stay safe young man and stay dirty! Great job...
Yeah me and my grandpa has something similar, he owned a repair shop for small engines, for about 9 years I was with him every day fixing old tractors!
Very cool, i like how you didn't have to buy any parts and it would be cool if you could hookup the brake linkage to the mower deck lift or pto engagement so you could shift gears on the fly.
Love this. I am wanting to do something like this. Off road toys are too expensive in TN. I want to put a motorcycle engine on a lawn mower. But I will probably start with what you are doing.
Some lawnmowers have very powerful engines already in them Ik one I have had a 500 or 650cc motor and it is a beast always look online for people selling used ones too
We have the same lawn mower design for the cutting deck. If the belts and the line aren't put in the right way they will smoke because they're rubbing. It's a good design and is reliable when put together correctly.
I bolted on a older Vanguard 14hp V-Twin on my L100, still working out the exhaust (to be quieter) but have open side pipes currently. Big exhaust, a 16hp carb so far. Sounds awesome. So easy to swap engines on these.
Never actually thought of cutting the guts of a pulley and swapping them.. i may have to try it and build my welding skills doin it too.. top job mate.
This young man should be afforded a scholarship with John Deere. Oh! and I happen to have an L100 that I am always welding up the deck to make it work, after years of cutter-deck neglect from previous operator. Well done fella (Highly regarded - Australian Praise) and all kudos to you.
Funny, and Straight forward! Good stuff bud, Me n My Grapa Spent a lot of time together too! He taught me to mechanic on Diesel Trucks! Best times !!!!
I remember digging a pit for the new garage that was going in with my 77-year-old grandfather with terminal cancer. The man was a beast and would not stop. He taught me so much about life even at a young age before he passed on the value of hard work. And as for mechanical my father and my uncle got me on the start of mechanics and machining. So now whenever I'm working on something whether it be my truck, my Harley, my house or anything in general if I'm capable of making the part myself I do it. It's what my grandfather instilled on me if you're able to do something do it! 🤟💪
Im going to try to get one of these lawn mowers just to do stuff with and fix just for fun and to learn about it because i wanna be a mechanic and this is probably the best way to start
It's also like a bike transmission where if you had a big rear cog and small front gear then you would have a very short ratio with low speed and easy climbing for hills, but if you switched the gear sizes then you would have a monster on the flats but the hills would kill it.
My dad has a lawnmower called the "Yard King" and it was a king! He said he won't use it for mowing, so I drive it around crazy! I WANT to make it a race mower
Good job Dude,. The world need more young Men like you, building, tinkering, engineering, creating,. I put a two stroke mini bike engine on a bikecycle in highschool, I wrode it to school all year . After 35 yrs in heavy construction 59 now disabled. I found myself looking for a new hobby, I built a motorbike like the one I built at 16 in highschool, only this one is real nice I built it to look like a 1915 early American Harley Davidson it turned out AWESOME 😎. IN N. PHX, 76' HIGHSCHOOL I was called Motor bike Mike everyone knew who I was . I grew up riding dirt bikes Yz125, 250s, later on in life after my daughter got bigger I started riding, racing, CR500, XR600, XR650 tricked out 10k race bike wrode the hole Baja California 1550 miles in 6days 99', then road bikes 3 different Harley Davidson, Big dog chopper,. After 9 surgery's both shoulders, neck, low back bolted together, of knee,. I don't ride anything but my nice truck , shooting guns is the only hobby I can do now . But it all started riding dirt bikes at 8yrs old ! Your a great guy Buddy.
Your grandpa would definitely be proud of you. I have this exact same lawn tractor. Not looking to do this, but I like what you’ve done. Looks like a lot of fun for sure! 👍🏼
Lol that's awesome bud.. I got a lx172 today free... Was standing 8 years in a shad , I filled with gas. Bought a new battery and start rigjt up after 30sec cranking...works awesome now I gotta do what u did lol..thanks for the video can't wait to get up in the morning
What a great way to honor yer grandpa.and tour dad gets on it to honor what you did .FANTASTIC MAN ENJOY YOUR G.P.MEMORIES AND STORE YOUR DADS MOMENTS WITH HIM..SOMETHING I NEVER GOT TO EXPERIENCE..BUT YOU MAKE IT AWSOME TO WATCH..KEEP IT UP..
When I heard you scream on that mower I was dying. That got me. Subscribed. Nice build man making something from what you have instead of buying it. Grandpa taught you very very well.
Give it some gas and the scream I died lmao. I built a early 2000s craftsman into a backyard racing lawn mower for our yard mower racing series 5 of us in the racing club have tracks we built at our houses and we race at each other's track like a touring type racing series and every track is completely different like mine is a huge inside 1/8 of a mile or 1/4 mile out side high banked track in the same shape as pocono raceway and the other track for exame is a small high banked d shape oval, and another one is a road course in dirt and another is a high banked huge inside 1/4 mile oval built in one of his fields on his farm that he uses for private dirt modified and mini sprint and 4 cylinder racing it's a legit racetrack walls caution lights for drivers to see when caution is out flag stand and all it's a full blown dirt oval track in the middle of the field with beautiful red clay that he puts cotton under every time before winter so it's ready to race on in the winter time when the other dirt tracks and asphalt oval tracks are done for the season so we can race our dirt cars or test new cars that we just built for the following season it's pretty cool, the city won't let him turn it into a real racetrack where he races cars like a full season with fans and Alla cuse the city has a ordinance for no new racetracks can be opened or built anymore new only existing ones are allowed to stay once they are gone no more racing down here.
My grandfather built a wagon with a 55 gallon drum welded on top with a hole in the front for the tongue and hole on top to get in. We would ride it down an inclined alley, with no brakes. I don't think I've ever seen another barrel/wagon contraption, but I'm sure they were out there.
20:04 you didn’t break anything just stalled it. Like putting a car in 5th and popping the clutch except it’s a lawnmower haha. Great video, subscribed!
Take the pivot out of the front end and it will handle alot better.. you will get a speed wobble if you dont.. if you take the pivot out of the front end you need to weld the spider gears in the transaxle...its easy .. you can also make it quick steer like a go cart by just drilling one hole in the front steering arm and moving the steering rod closer to the pivot. Nice build. Have fun. Pull the govenor and put some dual pipes on it.. it will sound awesome.
The govenor limits the engines rpm.. the more Rpm's the more top speed.. I have never seen a video on converting the steering. But I can try to explain. Usually there is a steering rod that runs from the steering wheel pivot to the front spindle. We will call it rod A... and another rod that connects the two front spindles..we will call it rod B.. the end of rod A at the front where it hooks the the spindle needs to be moved closer to the spindles pivot.. just drill a hole closer to the pivot..and move the steering knuckle to the new hole.. this will change the steering geometry and make it steer much faster... drill multiple holes if you want this will allow you to play with it until you get where you want it..
the reason these decks go through belts is because people do not adjust them properly, they have brake pads that are released from the pulleys when you engage the blades and these are there so that when you shut the deck off the blades stop spinning quicker. These need to be adjusted and tightened so that they actually release when you engage the deck otherwise they stay trying to stop the pulleys and its so much resistance it just burns up the deck belts all the time, i had one with the same issue and once i adjusted them it works fine now.
There is a reason people don’t make them faster and lift them. They make them faster add brakes and lower them and change the steering to make them way faster and safer
This take me back to old youtube videos. When you just wanted to have a good time and plasm your crazy life on a video ... Just for fun and not for likes or subscribers
Pretty sure my 6 speed 2006 MTD Yardmachine 38 inch stock would give your beast a run for it's money. I dunno what they were smoking at MTD, but dang 6 gear turns and burns, will buck yo arse right off the back if you ain't holdin' on... Cool video :D
Worm drive off the engine to a clutch to a drive line flip the rear axle 90 degrees use a old cv off a fwd car for drive line. Mines not done but working on it. I have a 80cc lady bug from the 80's and I got it to go 35mph so far. I've been looking for differential gear next.
I have the same one my stock 17 hp I had 6 starters on it and I went to fix the valve because I thought it being really hard to turn over was killing my starters but I snapped one of the valves and now I gotta 20 hp on and I got 19x7x8 atv tires stretched onto the stock rear wheels
0:49 Random Dark Gray Cat appears out of nowhere from behind his head and is taking lovely walk. 0:57 Dirty white Cat Teleports in between the front tire and the mower deck and looks around to see who is watching before crawling in between the space where the mower deck is lowered enough for a warm nap.
Im sure grampa is 😃 looking down on you. I have a few mowers with similar mods on them super fun if you can get the steering tightened up if not its super sketchy. Have fun be safe. Ps. bigger tires on back will make it even faster.
Yes i finally found a small youtuber that makes great content.
Whistlin Diesel: "Our battle will be legendary"
Yes
@@jaydenflower349 update: whistlin deisel is no longer a small youtuber lol
@@clinicallydisappointed4801 and he won the Lamborghini.
Any grandfather would be proud to have a grandson like you. Good job young man.
My grandpa just told me he was proud of me when he was watching me build my mower and I felt so proud lol
My grandpa say I’m stupid for making my mower go fast fr 😢
Bro when he said let's give it some gas and screamed I died lmao 🤣🤣🤣
Me too 😂
Yeaj
🤣🤣🤣
Sir sir grab me that cat
Same lmao
Lightweight is good and what did I use it for it’s a lawnmower th-cam.com/users/postUgkxTPN04aT-Qdjr_KS3ql7ng8wnU3wwsCqk also recommend Yes it is lightweight so hence not as robust as our old one. But if you take care it does the job really well.
Just adding the bigger wheels also slightly increases your gear inches even more.
Slower to accelerate, but higher top speed and holds speed better and won't get stuck in soft surfaces as easily.
I learned a lot from riding a 29er mountain bike. Like how I never could get the gearing as short as on anything smaller
I couldn't stop laughing on the first test run~! Love this kid and love how honorable he is. It's not about leaving a better planet for our kids...... it's about leaving better kids for the planet. Thanks Grandpa!!
You're gay
I love how you said that
@@ryanbenge7824 Tom McDonald song
All lives matter tom Macdonald?
Your Grampa taught you well.
When I was a little boy me and my grandpa would drive the tractor. And I would sit on his lap there was many times we would go out of control. And we both would hold the steering wheel as tied as we could.
@@i.t.creations5573 my grandpa chased me with his tractor when I was on my dirtbike 😂
I also did too, but now I am 12 years old so not anymore!
IM DRIVING THE MOWER MYSELF
When I was a kid (70s/80s) my parents had a Snapper riding mower with a 5hp rear engine. THAT thing was FAST! If you popped the clutch in top gear, you could ride a wheelie across the yard. I'm giving my parents a lightly used Craftsman riding mower, and I think I'm going to build a "racer" out if their old Troy-Bilt. Most people lower their mowers so they handle better!
Dude I know what You're talking about! I have one in my folks storage shed. After mowing the lawn I'd put that sucker in 5th turn off the blade engagement lean back and drop the clutch lol Wheelies all day! Loved that snapper
Tip presented in good faith: it will chew through belts if you engage the blades while the engine is full throttle. You are supposed to turn the blades on at low throttle then increase to cutting rpms! Paused at 4:18 to comment this but I'm enjoying the video and will finish watching!
More youtubers should show this amount of happiness they get from their videos
I think it’s a safe assumption that you’ve got grampys genes! The pulley ratio is too tough to start out in fifth, that’s why it stalled. I’d just start in third and work my way up but also throw a tension pulley on the belt to help keep it tighter. Man did I get a great idea from this. I have an l100 also and an stx38 I’ve been wanting to use strictly as a wagon puller for yardwork anyway so it looks like I’ll be listing the 38” deck on the marketplace and building me a workhorse like yours! 😉 Thanks for taking us along. A helmet would be a great idea. Remember it’s not how fast you go, it’s that sudden stop ending your ride that’ll hurt!
(I just buried a brother who got hit on his bike SIX HOUSES AWAY FROM HOME!) So stay safe young man and stay dirty! Great job...
Yes! Your grandpa would have loved it!! I know he is laughing and screaming with you! 🤣👏🏻🙌🏻❤️
Yes he is I miss him very much
Shepherd's Chapel Network !!!!!!! Pastor Murray is an Anointed Servant of GOD who teaches the Word of GOD with Authority!!!!!!!
He isent watchin hes dead but if ge was there he would be
@@chicosuaveslowend1877 dark as fuck
Yeah me and my grandpa has something similar, he owned a repair shop for small engines, for about 9 years I was with him every day fixing old tractors!
Very cool, i like how you didn't have to buy any parts and it would be cool if you could hookup the brake linkage to the mower deck lift or pto engagement so you could shift gears on the fly.
The memories of time spent crossed 3 generations. Kick Ass
Love this. I am wanting to do something like this. Off road toys are too expensive in TN. I want to put a motorcycle engine on a lawn mower. But I will probably start with what you are doing.
Some lawnmowers have very powerful engines already in them Ik one I have had a 500 or 650cc motor and it is a beast always look online for people selling used ones too
Finally someone took a john deere and made it fast I been waiting for this and you used the same pulleys just changed them around
We have the same lawn mower design for the cutting deck. If the belts and the line aren't put in the right way they will smoke because they're rubbing. It's a good design and is reliable when put together correctly.
I bolted on a older Vanguard 14hp V-Twin on my L100, still working out the exhaust (to be quieter) but have open side pipes currently.
Big exhaust, a 16hp carb so far. Sounds awesome.
So easy to swap engines on these.
Never actually thought of cutting the guts of a pulley and swapping them.. i may have to try it and build my welding skills doin it too.. top job mate.
great how you look up to your grand pa charish his memories. great job and fun content.
This young man should be afforded a scholarship with John Deere. Oh! and I happen to have an L100 that I am always welding up the deck to make it work, after years of cutter-deck neglect from previous operator. Well done fella (Highly regarded - Australian Praise) and all kudos to you.
Funny, and Straight forward! Good stuff bud, Me n My Grapa Spent a lot of time together too! He taught me to mechanic on Diesel Trucks! Best times !!!!
my grandpa died before he could teach me anything
I remember digging a pit for the new garage that was going in with my 77-year-old grandfather with terminal cancer. The man was a beast and would not stop. He taught me so much about life even at a young age before he passed on the value of hard work. And as for mechanical my father and my uncle got me on the start of mechanics and machining. So now whenever I'm working on something whether it be my truck, my Harley, my house or anything in general if I'm capable of making the part myself I do it. It's what my grandfather instilled on me if you're able to do something do it! 🤟💪
Im going to try to get one of these lawn mowers just to do stuff with and fix just for fun and to learn about it because i wanna be a mechanic and this is probably the best way to start
Same buddy
It's also like a bike transmission where if you had a big rear cog and small front gear then you would have a very short ratio with low speed and easy climbing for hills, but if you switched the gear sizes then you would have a monster on the flats but the hills would kill it.
A great job young man! I'm retired, I enjoy seeing you people doing things that can help them learn. And have fun
My dad has a lawnmower called the "Yard King" and it was a king!
He said he won't use it for mowing, so I drive it around crazy!
I WANT to make it a race mower
I got a craftsman to work on, I’m excited to have mine go like that
Good job Dude,. The world need more young Men like you, building, tinkering, engineering, creating,. I put a two stroke mini bike engine on a bikecycle in highschool, I wrode it to school all year . After 35 yrs in heavy construction 59 now disabled. I found myself looking for a new hobby, I built a motorbike like the one I built at 16 in highschool, only this one is real nice I built it to look like a 1915 early American Harley Davidson it turned out AWESOME 😎. IN N. PHX, 76' HIGHSCHOOL I was called Motor bike Mike everyone knew who I was . I grew up riding dirt bikes Yz125, 250s, later on in life after my daughter got bigger I started riding, racing, CR500, XR600, XR650 tricked out 10k race bike wrode the hole Baja California 1550 miles in 6days 99', then road bikes 3 different Harley Davidson, Big dog chopper,. After 9 surgery's both shoulders, neck, low back bolted together, of knee,. I don't ride anything but my nice truck , shooting guns is the only hobby I can do now . But it all started riding dirt bikes at 8yrs old ! Your a great guy Buddy.
Thank you man that is a awesome testimony
Your grandpa would definitely be proud of you. I have this exact same lawn tractor. Not looking to do this, but I like what you’ve done. Looks like a lot of fun for sure! 👍🏼
Lol that's awesome bud..
I got a lx172 today free...
Was standing 8 years in a shad ,
I filled with gas. Bought a new battery and start rigjt up after 30sec cranking...works awesome now I gotta do what u did lol..thanks for the video can't wait to get up in the morning
What a great way to honor yer grandpa.and tour dad gets on it to honor what you did
.FANTASTIC MAN ENJOY YOUR G.P.MEMORIES AND STORE YOUR DADS MOMENTS WITH HIM..SOMETHING I NEVER GOT TO EXPERIENCE..BUT YOU MAKE IT AWSOME TO WATCH..KEEP IT UP..
When I heard you scream on that mower I was dying. That got me. Subscribed. Nice build man making something from what you have instead of buying it. Grandpa taught you very very well.
That's great stuff. Brings back alot great memories of my dad and me. Thank you brother
Great video I laughed really hard when you did the test drive I want a mower now lol.
Thank you it was really fun 😁
Bro imagine if you take the governor off
The engine would be toast if he did yhat
@@twowheelking1909 Yer not wrong. the piston comes out the side of the block when you do that.
@@blah5533 I know
@@twowheelking1909 What would you have to do for mods to the existing engine to make no governor achievable
@@nicholaskane5592 what do you kean
Give it some gas and the scream I died lmao. I built a early 2000s craftsman into a backyard racing lawn mower for our yard mower racing series 5 of us in the racing club have tracks we built at our houses and we race at each other's track like a touring type racing series and every track is completely different like mine is a huge inside 1/8 of a mile or 1/4 mile out side high banked track in the same shape as pocono raceway and the other track for exame is a small high banked d shape oval, and another one is a road course in dirt and another is a high banked huge inside 1/4 mile oval built in one of his fields on his farm that he uses for private dirt modified and mini sprint and 4 cylinder racing it's a legit racetrack walls caution lights for drivers to see when caution is out flag stand and all it's a full blown dirt oval track in the middle of the field with beautiful red clay that he puts cotton under every time before winter so it's ready to race on in the winter time when the other dirt tracks and asphalt oval tracks are done for the season so we can race our dirt cars or test new cars that we just built for the following season it's pretty cool, the city won't let him turn it into a real racetrack where he races cars like a full season with fans and Alla cuse the city has a ordinance for no new racetracks can be opened or built anymore new only existing ones are allowed to stay once they are gone no more racing down here.
My grandson and I just restored my old LA115. It runs and cuts better than when it was new now!
I recently bought an old mower with plans of turning it into a go-kart, this video has me stoked lol
So much fun watching this! Your father drove it super nice so cool! thank you for sharing. Loved your story about grandpa God bless! 👏🏼👏🏼👏🏼
Glad I found this video. Just learning about small engines and making a racing tractor would be a good summer project
Your awsome bro I miss my grandpa....I really miss that guy....he was the sh/t
My grandfather built a wagon with a 55 gallon drum welded on top with a hole in the front for the tongue and hole on top to get in. We would ride it down an inclined alley, with no brakes. I don't think I've ever seen another barrel/wagon contraption, but I'm sure they were out there.
This guys energy kills me 😂😂😂
Love the channel already
Thanks, I'm going to be trying this soon. I have a old mower that I want to modify and see what happens.
That is awesome it is super fun and it is a fun project
E
@@elijahdagamer677 F G H I J K L M N O P Q R S T U V W X Y Z
Haha
The first test drive after the mods was hilarious😂
20:04 you didn’t break anything just stalled it. Like putting a car in 5th and popping the clutch except it’s a lawnmower haha. Great video, subscribed!
I had a wheel horse 1967 model welded rear end 26-12-12 dico ported and polished it had a k181 8ph it turned 8100 rpm that thing was a blast to pull
Soon as he said, "Im gonna swap the pulleys around" I knew he was gonna have fun.
THOSE ScREAMS ON THE TEST RUN IS FUCKING ICONIC
Take the pivot out of the front end and it will handle alot better.. you will get a speed wobble if you dont.. if you take the pivot out of the front end you need to weld the spider gears in the transaxle...its easy .. you can also make it quick steer like a go cart by just drilling one hole in the front steering arm and moving the steering rod closer to the pivot. Nice build. Have fun. Pull the govenor and put some dual pipes on it.. it will sound awesome.
So you mea to tell me I just put. New governor in the YTS3000 and it doesn’t even need it. Also that steering build?..Amy video of that??
The govenor limits the engines rpm.. the more Rpm's the more top speed.. I have never seen a video on converting the steering. But I can try to explain. Usually there is a steering rod that runs from the steering wheel pivot to the front spindle. We will call it rod A... and another rod that connects the two front spindles..we will call it rod B.. the end of rod A at the front where it hooks the the spindle needs to be moved closer to the spindles pivot.. just drill a hole closer to the pivot..and move the steering knuckle to the new hole.. this will change the steering geometry and make it steer much faster... drill multiple holes if you want this will allow you to play with it until you get where you want it..
Remembering the recent ancestors
👍👍👍
I have the same one and we use it a lot for work
Wow can't wait to drop my deck and drive through some puddles
Dude u are best he may be gone here on earth he is smilen from heaven saying that's my grandson doing that
That little scream 😂😂
Going to need a roll cage on that baby. Looks fun!
Great job👍👍
Yeee yeeee I got a muddy dirt road around the corner and me and my buddies thank you
Great video. My kinda music. My kids can watch it with me and the actual content is 100% what I was searching for. Now give it some gas! Lmao
Cool modifications, nice work on it
Dad looked like he loved it 🤟
Wow BROTHER... THAT IS AMAZING!!!!
As a union sheet metal worker I love seeing that he's using an actual sheet metal hammer.
8:12 and 9:50, I am realizing how much I take my pulley puller for granted
Also impacts.
Install brass or bronze bushing in the steer links at the front wheels for tighter steering. The plastic ones have likely work.
Awesome vid!
the reason these decks go through belts is because people do not adjust them properly, they have brake pads that are released from the pulleys when you engage the blades and these are there so that when you shut the deck off the blades stop spinning quicker. These need to be adjusted and tightened so that they actually release when you engage the deck otherwise they stay trying to stop the pulleys and its so much resistance it just burns up the deck belts all the time, i had one with the same issue and once i adjusted them it works fine now.
Hey I found this video very cool and very useful! I am your 1000th subscriber, hope to see more awesome content in the future!
Awesome video man, keep it up!!!
Love your content
best video ive seen this week bro great great job
Widen the wheel base and you got a fun toy!
I had to give this video like because of the pure excitement that came over him when he gave it the gas
As you look out the window and hear screaming..
ahhhhh that's too fast!
Wellp that neighbor boys at it again on a John deer lawn mower!!??
Cool video and that thing looks way faster, however the gearbox/diff sounds like it’ll die pretty quick so I’d be changing something in there
Seen a guy drill a hole and put a grease nipple on the rear end..and filled with high temp grease
thanks for the bulilding idea gonna try it
Great content!
There is a reason people don’t make them faster and lift them. They make them faster add brakes and lower them and change the steering to make them way faster and safer
This take me back to old youtube videos. When you just wanted to have a good time and plasm your crazy life on a video ... Just for fun and not for likes or subscribers
Great project clean fun
Well done my friend.
Good job,fun content
Young man sounds like George Bush senior... But I love how you jump in there and just get it done.We do a lot of crazy bills like this
The screams sent me 🤣🤣
New sub. Cool story!
What size pulley did you have in the front and back? I've got a JD LT160 I'm trying to rebuild and need pulleys b/c it's a hydrostatic.
Pretty sure my 6 speed 2006 MTD Yardmachine 38 inch stock would give your beast a run for it's money. I dunno what they were smoking at MTD, but dang 6 gear turns and burns, will buck yo arse right off the back if you ain't holdin' on... Cool video :D
Worm drive off the engine to a clutch to a drive line flip the rear axle 90 degrees use a old cv off a fwd car for drive line. Mines not done but working on it. I have a 80cc lady bug from the 80's and I got it to go 35mph so far. I've been looking for differential gear next.
Thanks tiger 🐯 that was kick ass
Great content!! You now have a new sub!
I have the same one my stock 17 hp I had 6 starters on it and I went to fix the valve because I thought it being really hard to turn over was killing my starters but I snapped one of the valves and now I gotta 20 hp on and I got 19x7x8 atv tires stretched onto the stock rear wheels
That sounds like it can be really fun
0:49 Random Dark Gray Cat appears out of nowhere from behind his head and is taking lovely walk.
0:57 Dirty white Cat Teleports in between the front tire and the mower deck and looks around to see who is watching before crawling in between the space where the mower deck is lowered enough for a warm nap.
Damn this is great!
right on. my dad drove lawn tractor in 'nam
idk if the newer mowers have them but if you adjust the governor you can make the throttle go full
The phone shaking and screaming really had me 😂
That’s awesome
Thank you
Im sure grampa is 😃 looking down on you. I have a few mowers with similar mods on them super fun if you can get the steering tightened up if not its super sketchy. Have fun be safe.
Ps. bigger tires on back will make it even faster.
That scream tho lol 😂