Cracked Equipment Trailers and Burritos

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ธ.ค. 2024

ความคิดเห็น • 164

  •  2 ปีที่แล้ว +1

    Yo, that forklift push was rad as hell

  • @justintasht1067
    @justintasht1067 2 ปีที่แล้ว +27

    Man I love how you can do anything it all comes so naturally nothing fazes you. Love how you work and how you do it I bet your customers are always well happy with your work you do. 👍👍👍

    • @MeltinMetalAnthony
      @MeltinMetalAnthony  2 ปีที่แล้ว +8

      I appreciate that! thanks for always commenting! your one of the people thats helped the channel grow

    • @diegomarquez9505
      @diegomarquez9505 2 ปีที่แล้ว

      @@MeltinMetalAnthony Thank you, keep doing the vids, Im looking into starting a welding side hustle.

    • @1nvisible1
      @1nvisible1 2 ปีที่แล้ว

      *I like how there's an element of suspense in your video as I see that giant eight foot' long guillotine of a ramp right over your head, but logically there wouldn't be a video of it posted if Anthony had become decapitated, right?*
      *"Don't worry, I pinned the gate!"*

  • @FishFind3000
    @FishFind3000 2 ปีที่แล้ว +9

    1:00 that’s why you leave the guard on. If that piece came at your hand or face say goodbye to those digits.

    • @aaronbrown3573
      @aaronbrown3573 2 ปีที่แล้ว +4

      Really ? You ever done it ? I've had a few break out of a thousand. I've had them hit my gloveless hand a couple times. It's not that big of a deal for a man. Loose digits.lol. Not a chance.

    • @corpimet3164
      @corpimet3164 17 วันที่ผ่านมา

      He can't. He's American. Only civiliced country without a free healthcare, but it's mandatory to live like they have one.

  • @garys5175
    @garys5175 2 ปีที่แล้ว +4

    Bustin' ass, on camera, burnin' them rods and turnin' them invoices! $$$$$ You da MAN, Anthony!

  • @sethpearson3508
    @sethpearson3508 2 ปีที่แล้ว +10

    Appreciate the content man especially as a young welder doing metal fab and boat dock repair

  • @quickshot4050
    @quickshot4050 2 ปีที่แล้ว +3

    2:00 imo fast freeze rods are better downhill, I can’t run uphill with them to save my life lol

  • @kaywhy9545
    @kaywhy9545 2 ปีที่แล้ว

    You truly are a hard workin american that makes this country so great. Good to have you on the blue collar team

  • @_skatefate_2612
    @_skatefate_2612 2 ปีที่แล้ว +1

    Greeting from San Jose CA. My name is Jose Ibarra and I’m actually about to graduate from college. My major is Construction technology. But want to specialize in welding. I love the content you’re putting out there for us. Appreciate you!

  • @paulwakeman34
    @paulwakeman34 2 ปีที่แล้ว

    What’s up bro! I just moved to Texas, I’ve been a firefighter for almost 9 years and I watch your videos almost everyday. I love my job but I really love the work you do and I’m slowly transitioning into becoming a welder. I would love to have the capability of being a mobile welder someday. Hope your house is coming together nicely and looking forward to seeing more context from you!

  • @sh839c
    @sh839c ปีที่แล้ว +1

    Yes, the longer videos are the best.

  • @davidkenworthy7548
    @davidkenworthy7548 2 ปีที่แล้ว +2

    Nice job Anthony, still waiting for you to set up that beautiful new rig

  • @gordjohnson70
    @gordjohnson70 9 หลายเดือนก่อน +1

    Your videos are good. You take on anything.

  • @gettygarrettable
    @gettygarrettable 2 ปีที่แล้ว

    Best mobile welding channel on youtube right now!!

  • @GeetarGaz
    @GeetarGaz 2 ปีที่แล้ว +9

    Great video again, love the realistic content, not just all the pretty stuff.

  • @GKRTANKLINESLLC.
    @GKRTANKLINESLLC. 2 ปีที่แล้ว +1

    I firmly believe that the burrito, beans, and rice is how you were able to complete this job!!! Good content as always !!!

  • @WelderB1Family
    @WelderB1Family 2 ปีที่แล้ว +2

    Another hardworking video!!! I just picked up a welder....you've inspired me to start picking up some small welding repair jobs. Gonna start real small with my free time. Thanks alot for the motivation bro. 💯👨🏾‍🏭

  • @ApocalypsesandSurvival
    @ApocalypsesandSurvival 2 ปีที่แล้ว

    Those ramps would make the Ultimate Zombie Apocalypse door or draw bridge, it was a thought, but I'm glad your in your element and enjoyed watching your video, the Burrito meal looked very hefty indeed, tummy is grumbling now. 🤗

  • @codyjackson2588
    @codyjackson2588 2 ปีที่แล้ว +2

    I literally started watching you last night and I really like your content. Pretty much stayed up all night watching you lol

  • @scottherr642
    @scottherr642 2 ปีที่แล้ว +1

    Great channel anthony-your subs are spared the fake BS and just get great real world content. If possible I'd love to see how you price out a job like this for a good customer who keeps you fed. Again love the channel dude.

    • @MeltinMetalAnthony
      @MeltinMetalAnthony  2 ปีที่แล้ว +1

      I charge most customers $100-110. I don't bid heavy repair work. I would either grossly over estimate or under. I bid fab jobs, small repair, and basically everything else

    • @scottherr642
      @scottherr642 2 ปีที่แล้ว

      Thanks for replying. Good customers, who know and appreciate what you go through to get things done, are sometimes hard to find. Trying to make up my mind if mobile might be for me. Thanks again for the reply and a GREAT CHANNEL.

  • @thebeardedstork432
    @thebeardedstork432 2 ปีที่แล้ว

    Nice work Anthony. I am a fan of your welding projects and Burritos!

  • @dolphincliffs8864
    @dolphincliffs8864 2 ปีที่แล้ว +2

    Nice welds!

  • @flir67man84
    @flir67man84 2 ปีที่แล้ว +1

    Thanks for telling us the amps you use.. helpful

  • @melvinmariott8609
    @melvinmariott8609 2 ปีที่แล้ว

    I been doing a lot of mig welding right now. Ill be glad when I get back to stick welding again.

  • @PAYNEKILLER..
    @PAYNEKILLER.. 2 ปีที่แล้ว +3

    You ever used 3M Cubitron grinding wheel's Anthony? They are the friggin answer, I use cheap ones too but nothing beats a cubitron.

    • @greggarnham8497
      @greggarnham8497 2 ปีที่แล้ว

      Agreed. Not only do they cut so much better, but I get at least 2.5 to 3 times the life out of each disc compared to a zirc. In Aus, acubitrons run about double the price of a zirc, so not only for the superior cutting performance, but also for the coin, they just make sense.

  • @bb.3844
    @bb.3844 2 ปีที่แล้ว +4

    You talk shit on the other guys welds and then lay down worse welds. This channel is a comedy goldmine.

    • @olliwhoSu
      @olliwhoSu 6 หลายเดือนก่อน

      are you the other guys?🤣

  • @PAYNEKILLER..
    @PAYNEKILLER.. 2 ปีที่แล้ว

    My 2019 Bobcat T770 tracked skidsteer has those hydraulic locks, heated air ride seat, suspension on the tracks, ride control, stereo. They've come along way in twenty years.

  • @francodeiuliis1562
    @francodeiuliis1562 2 ปีที่แล้ว +1

    That’s a days work for sure
    Good on you again bud
    Keep up the great work
    Cheers from Nova Scotia

  • @whatsnextgarage
    @whatsnextgarage 2 ปีที่แล้ว

    YUP, just gets better and better!! Great vid Meltin' Metal!

  • @peterbiltpilot516
    @peterbiltpilot516 2 ปีที่แล้ว +10

    Looks like that pin could use a good greasing

    • @gordjohnson70
      @gordjohnson70 9 หลายเดือนก่อน +1

      Grease grabs dust and road grit.

  • @09FLTRMM77
    @09FLTRMM77 2 ปีที่แล้ว +1

    MM77 Approved 👍🏼👍🏼

  • @gadgetshouseofbuild1554
    @gadgetshouseofbuild1554 2 ปีที่แล้ว

    Sweet job again ! Great looking lunch and beads!!! Ha nice job!

  • @michaelweinstein2795
    @michaelweinstein2795 2 ปีที่แล้ว +2

    Hi Antony great job as always man! I wanted to ask...what kind of boots are you wearing?

  • @BruceLyeg
    @BruceLyeg 2 ปีที่แล้ว

    I love videos like this. Nice job, I love burning one rod right after another. It's kinda zen like for me

  • @Jdl223
    @Jdl223 2 ปีที่แล้ว

    That skid steer coupler is cool, no more getting out to push down those handles and skim a knuckle occasionally

  • @erickdelacruz9586
    @erickdelacruz9586 2 ปีที่แล้ว +3

    For this job could you have used a mig welder running 0.35 wire with 75/25 gas or do you have to use dual shield gas just asking

    • @MeltinMetalAnthony
      @MeltinMetalAnthony  2 ปีที่แล้ว +6

      No too windy for either

    • @williamthomas9463
      @williamthomas9463 2 ปีที่แล้ว

      While it may well have been too windy, I successfully run gas shielded wires in moderate wind on a regular basis. The key is to use a 1/2” long, tapered nozzle and crank up the gas pressure (50-60 with gas shielded flux core). That said, you should NEVER go near a job like that with hard wire. Gas shielded flux core or 7018 stick are your only logical choices in the field on a structural repair when you’re running in all positions. Unless, of course, the base metal requires a higher alloy filler(80-11018 for example).

  • @genemcgovern2755
    @genemcgovern2755 2 ปีที่แล้ว +1

    hi Anthony,another great video? thanks for sharing your works iam glad you are painting your welds, for those who do not know the paint makes things look so much better, the welds start to look like shit when the surface rust starts almost immediately, it pays to keep a gallon can of cheap primer and a few cheap throw away brushes,that will cost less than a few spray paint cans. how come you did not preheat the lug you rewelded in the first job today? I have a good tip I always used ,yesterday when you were welding the gussets in the de-watering. pipes,(you should make it a habit to pick up some .75-1 inch washers and keep them on your truck,when you burn a hole for a shackle weld a high strength washer over the hole it looks so much better and it is stronger? hope you don't mind my advice I have picked up a lot of tricks and learned to be a pain in the ass ,I have ben working and welding for 55years? one last thing for today, it is so easy to install grease fittings all you need is a small drills couple of bits a small tap and some grease fittings, the last thing you did today ,putting in the new pipes and reinstalling the pins in the trailer would have a better jb if you had put in some grease fittings, and the pipes never would have split the way they did? keep on burning? gene 638

  • @dogbyte555
    @dogbyte555 2 ปีที่แล้ว

    Two of my favorite things, trailers, and burritos.

  • @dionhorn5624
    @dionhorn5624 2 ปีที่แล้ว +1

    Anthony This video was way better without all that loud "music". Nice work hope to see many more. Welds look great

  • @adamluka7984
    @adamluka7984 2 ปีที่แล้ว

    thank you bud I really Enjoy watching your Videos , best wishes Anthony

  • @unclea8148
    @unclea8148 2 ปีที่แล้ว +1

    Hello Anthony looks like you were in my neck of the woods. Was that the Mine and Mill on Combee road? I’m liking your channel and learning more from you. Been welding for a long time but not for a living. Have a Hobart 140, 175, and 250 champion. Keep it going man great job!

  • @josebou5471
    @josebou5471 2 ปีที่แล้ว

    You like the welding hood the safety Jackson?

  • @MOIIIIIIIOSE
    @MOIIIIIIIOSE 2 ปีที่แล้ว +2

    Im not a welder. but I am curious. When repairing a crack shouldnt you drill a hole at either end so it doesnt continue to crack? or does grinding it and welding it together leave you with same outcome?
    Thanks!

    • @StephenSwitzer
      @StephenSwitzer 2 ปีที่แล้ว +2

      Normally yes but if the crack goes all the way through there's nothing to drill

    • @MOIIIIIIIOSE
      @MOIIIIIIIOSE 2 ปีที่แล้ว

      @@StephenSwitzer Thank you! that makes sense to me

  • @properaussie331
    @properaussie331 2 ปีที่แล้ว +1

    Doesn’t matter what any boilermaker says or thinks.
    If you can’t do the job without a guard on a grinder, you need to get a job at donut king.
    A metabo grinder with dead man is the best grinder on the market.

  • @ypaulbrown
    @ypaulbrown 2 ปีที่แล้ว

    Anthony, looking marvelous.......Bravo.....

  • @dr.h_gibby3158
    @dr.h_gibby3158 2 ปีที่แล้ว +1

    GREAT VID AS ALWAYS!

  • @Tunzbig
    @Tunzbig 3 หลายเดือนก่อน

    that pin push with the bobcat was sensual

    • @MeltinMetalAnthony
      @MeltinMetalAnthony  3 หลายเดือนก่อน

      😂😂😂😂

    • @Tunzbig
      @Tunzbig 3 หลายเดือนก่อน

      @@MeltinMetalAnthony im pretty sure it said "ooooo papiii"

  • @Longtrailside
    @Longtrailside 2 ปีที่แล้ว +1

    Apprecieate what you do, enjoy the content.

  • @patricktrudeau1996
    @patricktrudeau1996 2 ปีที่แล้ว +2

    Sweet welds! How you liking that new Jackson hood?

  • @diegomarquez9505
    @diegomarquez9505 2 ปีที่แล้ว +1

    aside your bad ass work, What kind of Auto Darkening Lense do you have on that helmet?

    • @MeltinMetalAnthony
      @MeltinMetalAnthony  2 ปีที่แล้ว +1

      whatever came with the Hobart, I don't really know

  • @Asomesauc
    @Asomesauc 2 ปีที่แล้ว +1

    Learned me something thank you.

  • @jhonnymendoza5323
    @jhonnymendoza5323 ปีที่แล้ว

    Hard Work Brother!!

  • @DickHowe-c5q
    @DickHowe-c5q 13 วันที่ผ่านมา

    I'm surprised! Most of your work is prepping for the weld. You have to be a good prepper and a good welder.

  • @restoredmetalwelding7533
    @restoredmetalwelding7533 2 ปีที่แล้ว

    Hey Anthony. I think your work is great. I have a question as a small business owner. Im having what’s a good insurance company to use for business insurance? Im having issues getting business insurance.

  • @t335er7
    @t335er7 2 ปีที่แล้ว

    did you go to a welding school or was it on the jo training ?

  • @grumpycricket
    @grumpycricket 2 ปีที่แล้ว

    Would jack stands underneath the raised ramp be overkill?

  • @hubertrobinson8825
    @hubertrobinson8825 2 ปีที่แล้ว +1

    Good job man like always bud that burrito for 4 dollars is pretty damn good and it big too here in L.A. that would be nearly 10dollars of course everything in California cost half a days wages anyway we pay 3 times more for gas than you guys do

  • @codyjackson2588
    @codyjackson2588 2 ปีที่แล้ว

    So I'm about to be 19 and I'm interested in starting a welding career. I've seen some of your videos about the schools and how to get started but my main question is how do you get payed? Do u take cash only? Checks? Ect.?

  • @austinwheeler8988
    @austinwheeler8988 6 หลายเดือนก่อน

    How long does something link this take?

  • @rockyshoffner8216
    @rockyshoffner8216 2 ปีที่แล้ว

    Where are you working at in this video?

  • @danielsojourner267
    @danielsojourner267 ปีที่แล้ว

    Good job!!

  • @lar1664
    @lar1664 2 ปีที่แล้ว +2

    You should do a through tutorial on how to use a cutting wheel properly. I hate cutting wheels at times. Need to show the safest ways to use one without it exploding and doing some serious damage your face if not slitting vital organs.

    • @FishFind3000
      @FishFind3000 2 ปีที่แล้ว +1

      Always use the guard

    • @gonzalogarcia9112
      @gonzalogarcia9112 2 ปีที่แล้ว

      th-cam.com/video/hid9bDnSeok/w-d-xo.html fireball tool has a video on it

  • @mikerobi6100
    @mikerobi6100 4 หลายเดือนก่อน

    nice video great work very cool

  • @JoseMedina-jt7ip
    @JoseMedina-jt7ip 2 ปีที่แล้ว

    Your awesome!!
    I’m new to welding. I have a Millermatic 210. Can Mig be used for this job or is stick preferred??

    • @MeltinMetalAnthony
      @MeltinMetalAnthony  2 ปีที่แล้ว +1

      flux core, and thats because of location. its windy here this time of year. sometimes even flux core wouldn't work. I think its limited to like 15-20 mph?

  • @mikeadam6776
    @mikeadam6776 2 ปีที่แล้ว

    With a 6010 I would have done an uphill pass. If it shits to bed you can always clean it up and finish downhill.

  • @brianc3481
    @brianc3481 2 ปีที่แล้ว

    The term root passes and removing old rusted out metal makes me think of referring to this as metal dentistry.

  • @E9859-v7d
    @E9859-v7d 2 ปีที่แล้ว

    $4 burritos 😋
    That bobcat came in handy

  • @twinbrewers
    @twinbrewers 2 ปีที่แล้ว

    Good shit 🤙🏻

  • @jacobstrickland2608
    @jacobstrickland2608 2 ปีที่แล้ว +1

    What boots do you wear?

  • @Brad-lt6mr
    @Brad-lt6mr 2 ปีที่แล้ว +4

    A guy I worked with was cutting rust out of chassis, using a skinny disc with no guard. The disc shattered and hit him in the neck. I've never seen so much blood. He made it, but it was a very close call.

  • @donsmith9081
    @donsmith9081 2 ปีที่แล้ว

    Nice job!

  • @adamswelding5052
    @adamswelding5052 2 ปีที่แล้ว

    Why take so much time to cut out those welds with a cut off disk? Why not use a carbon arc?

  • @steventwiddy3402
    @steventwiddy3402 ปีที่แล้ว

    I’m not worried your the one under that heavy bastard not me !

  • @samuelramirez6588
    @samuelramirez6588 2 ปีที่แล้ว

    How did you know what size pipe to get?

  • @Robtoosaucey
    @Robtoosaucey 2 ปีที่แล้ว

    Hey Anthony when you’re using 7018 do you prefer ac or dc+ and why?

    • @MeltinMetalAnthony
      @MeltinMetalAnthony  2 ปีที่แล้ว

      Dc plus, better penetration. I almost never run ac

  • @SamFBM
    @SamFBM 2 ปีที่แล้ว

    hows that makita grinder holding up? got me one the other week from amazon for £40 feels pretty damn good quality compared to what i had before. i kinda don't wanna get it dirty bc it looks so new lol

    • @MeltinMetalAnthony
      @MeltinMetalAnthony  2 ปีที่แล้ว

      its been about a year, very light weight I don't use it when there's a lot of grinding to do just when im in weird positions

  • @jaysen2200
    @jaysen2200 2 ปีที่แล้ว

    Nice dude ! I do lots of repair work like this . Never trust a hydraulic Line with your life

  • @mariajacobs3649
    @mariajacobs3649 2 ปีที่แล้ว

    Another great job! $4.00 that burrito was huge 🤣

  • @Polkcounty_relics_4789
    @Polkcounty_relics_4789 2 ปีที่แล้ว

    Is that the taco stand on combee

  • @repalmore
    @repalmore 2 ปีที่แล้ว +1

    The Taco Bell in the Las Vegas TA trucks top had a 2lb burrito. That was long ago and they don't do that anymore. Oh well.

  • @kevinmorin7965
    @kevinmorin7965 2 ปีที่แล้ว +1

    First padeye weld; I'd sure have wrapped those hoses with a welding blanket! Buying one or two hoses would about cancel the job's profits!

    • @MeltinMetalAnthony
      @MeltinMetalAnthony  2 ปีที่แล้ว

      no hoses where harmed in the making of this film

  • @CoreytheMechanic
    @CoreytheMechanic 2 ปีที่แล้ว

    Really need to invest in you a air arc way less time and it’s the correct way for crack repair.

  • @papapsych2746
    @papapsych2746 2 ปีที่แล้ว

    E8010 is calling your name.

  • @zalamanteri
    @zalamanteri 2 ปีที่แล้ว

    Missed intro man 👍

  • @williamjones9099
    @williamjones9099 2 ปีที่แล้ว

    You da man

  • @Charrito1320
    @Charrito1320 2 ปีที่แล้ว +1

    👍👍👍👌👌

  • @maximogonzalez4649
    @maximogonzalez4649 2 ปีที่แล้ว +1

    Sweet! you the 💣👍🤓👋

  • @msdweldingfabrication7051
    @msdweldingfabrication7051 6 หลายเดือนก่อน

    I'm not sure if I would trust eating that giant burrito for $4😂 burritos are almost $16 here in California

  • @SingleDadLyfe
    @SingleDadLyfe 2 ปีที่แล้ว

    "fixing a bunch of bad welds" must be yours.

    • @lacky16
      @lacky16 3 หลายเดือนก่อน

      🤔

  • @sparksmobilerepair4025
    @sparksmobilerepair4025 2 ปีที่แล้ว

    Dam man I can't touch a burrito for lesd then 9 bucks around me! My Mind is blown!

  • @oscarborjon6112
    @oscarborjon6112 2 ปีที่แล้ว

    Get ready to replace that pipe again on the ramp. It should’ve been solid bar not pipe. You amaze me on the things you do.

    • @andyf1235
      @andyf1235 2 ปีที่แล้ว

      If a solid bar was used the ramps are essentially welded in place and cant be taken off like they can with the pin setup.

    • @MeltinMetalAnthony
      @MeltinMetalAnthony  2 ปีที่แล้ว

      your ignorance amazes me

  • @michaelmurphy7922
    @michaelmurphy7922 ปีที่แล้ว

    How many damn trucks do u have 😂

  • @tomasalvarado207
    @tomasalvarado207 2 ปีที่แล้ว

    😎👍

  • @curtislathrop
    @curtislathrop 6 หลายเดือนก่อน

    I like this channel fuck the haters

  • @Omg-js2gi
    @Omg-js2gi 2 ปีที่แล้ว

    Jew never cease to amaze me Ant!

  • @JJ-jv1gu
    @JJ-jv1gu 2 ปีที่แล้ว

    “TTT” Take a Toke Tony

  • @johndowe7003
    @johndowe7003 2 ปีที่แล้ว

    you buying your grinding wheels in bulk? why not use a scarfing tip to blow out the old welds ? its faster and its less to clean up

    • @MeltinMetalAnthony
      @MeltinMetalAnthony  2 ปีที่แล้ว

      didn't have a scarfing tip on the truck. the lowboy job was un expected. if I had known I would've took my white truck

    • @johndowe7003
      @johndowe7003 2 ปีที่แล้ว

      @@MeltinMetalAnthony ah shit youre just like me haha, gotta get two sets of everything now so you dont have to swap tools over on yer trucks

  • @derekinPhilippines
    @derekinPhilippines 2 ปีที่แล้ว +1

    Grinding the crack. Like that wingsuit guy.

  • @wcmwfab935
    @wcmwfab935 2 ปีที่แล้ว

    We're is that gaurd lol just kidding

  • @deant876
    @deant876 2 ปีที่แล้ว

    I always hate it when you stop welding to chip the slag and people run up to see what you have just done. I hit a customer with hot slag on his arm (thank God it was not his eye)

  • @Alexander_J_Jericho
    @Alexander_J_Jericho 2 ปีที่แล้ว +1

    Bump